KAISER FOTOTECHNIK 2479 Prolite LED 37-25 Light Box Instruction Manual

KAISER FOTOTECHNIK 2479 Prolite LED 37-25 Light Box

Product Information

• Product Name: Kaiser prolite LED 37/25 (2479)
• Product Type: Light Box
• Model Number: 2479
• Dimensions: 37 x 25 cm
• Light Source: 135 SMD-LEDs
• Color Temperature: Approximately 6000 Kelvin
• Color Rendering Index (CRI): 95
• Luminance: 9400 cd/m2
• Operating Voltage: 24 V
• Power Consumption: 29 W
• Weight: 3.12 kg
• Product Name: Kaiser prolite LED 50/37 (2480)
• Product Type: Light Box
• Model Number: 2480
• Dimensions: 50 x 37 cm
• Light Source: 270 SMD-LEDs
• Color Temperature: Approximately 6000 Kelvin
• Color Rendering Index (CRI): 95
• Luminance: 10000 cd/m2
• Operating Voltage: 24 V
• Power Consumption: 58 W
• Weight: 5.14 kg

  ---

Product Usage Instructions

1. Prior to using the light box, carefully read the instructions provided and keep them safe for future reference. 2. The prolite LED light box is designed for transillumination of transparent originals or other materials. It should not be used for any other applications. 3. Connect the light box to a power source using the provided mains adapter and mains lead. 4. Ensure that the housing,plugs, and cables are not damaged before putting the light box into operation. If any damage is detected, do not use the device and contact customer support for assistance. 5. To turn on the light box, use the on/off switch (4). 6. The brightness of the light canbe adjusted using the dimmer control dial (3). Rotate the dial to increase or decrease the brightness as desired. 7. Disconnect the light box and mains adapter from the power source before cleaning or performing maintenance. 8. Keep the light box and its components out of reach of children. 9. Follow the applicable legal regulations for disposing of the products at the end of their lifespan. 10. For maintenance and care instructions, refer to the user manual or contact customer support for assistance. 11. Optional accessories, such as a support bracket or wall mount, can be used with the light box if desired. Please refer to the user manual or contact customer support for more information.

Overview

1. Illuminated area
2. Socket for mains adapter
3. Dimmer control dial
4. On/off switch
5. Plug of connecting cable
6. Connecting cable
7. Mains adapter
8. Mains lead
9. Neodymium magnets
10. M6 square nuts
11. Set screw
12. Sliding block
13. 6 mm T-slot
14. Support bracket / wall mount (optional accessory)

Prior to using your light box, please read these instructions carefully. Keep them safe to have them at hand at any time. If you pass the light box on to somebody else, always in-clude these instructions.

Intended use

The “prolite LED” light box is intended to be used for transil-lumination of transparent originals (like slides or foils for ex-ample) or of other materials. It is not intended for use in other applications.
Use this light box only as described in these instructions. Any other use has to be considered as not as intended and can result in material damage or physical injury. This light box is not a toy.
Kaiser takes no responsibility for damages caused by not in-tended or incorrect use.

Safety instructions

Please observe the following safety instructions:

WARNING!

• Disconnect the devices (light box, mains adapter) from mains before cleaning and maintenance.
• Keep the products away from children.
• Do not put the devices into operation, if housing, plugs or ca-bles are damaged.
• Do not disassemble or modify the products. Repairs must only be carried out by qualified persons.
• Neodymium magnets have a very high magnetic pull. Always make sure that there is enough distance between the mag-nets so that they cannot gravitate towards each other. In the event of a crash, the magnets could be damaged; they could crack. There is a risk of injury! Also keep the magnets away from devices that could be interfered with or damaged by the magnetic field (e.g. monitors, hard disks, credit cards, watches, pacemakers, etc.).

CAUTION!

• Only use the light box with parts designed for it.
• Use the devices only in dry rooms.
• Keep the devices away from water and other liquids and from combustible materials.
• Do not use or store the devices at places with extremely high air humidity or at extremely hot places. Keep the devices away from direct solar radiation.
• Prior to boxing the devices, let them cool down.
• Do not place metal parts or subjects with sharp edges on the surface of the light box to avoid scratches.

Check devices and scope of supply

When unpacking the devices for the first time, please check if the scope of supply is complete. It comprises:

• prolite LED light box
• mains adapter (7)
• mains lead, 2.50 m (8)
• 2 neodymium magnets (9)
• 2 M6 square nuts (10)

Check also, if the devices are damaged by extraneous caus-es. If this is the case, do not take the devices into operation.

Connecting the mains adapter

Check that the mains voltage corresponds to the operating voltage given on the mains adapter (7) included. Take care that the light box is switched off: the switch (4) has to be in the “O” position.
Insert the plug (5) of the connecting cable (6) in the socket (2). Then connect the mains adapter (7) to the mains with the mains lead (8).

Initial operation

Switch on the light box using the switch (4).
Brightness can be adjusted steplessly by rotating the dim-mer control dial (3).
Originals can be fixed with magnets right next to the illumi-nated area (1) (fig. C). Two strong neodymium magnets (9) are included in the scope of delivery for this purpose.
Warning: Neodymium magnets have a very high magnetic pull. Always make sure that there is enough distance be-tween the magnets so that they cannot gravitate towards each other. In the event of a crash, the magnets could be damaged; they could crack. There is a risk of injury! Also keep the magnets away from devices that could be inter-fered with or damaged by the magnetic field (e.g. monitors, hard disks, credit cards, watches, pacemakers, etc.).
Switch off the light box with the switch (4), when it is not in use. Then disconnect the mains adapter (7) from the mains.

Attaching / Using accessories

On all four side sections of the light box there is a 6 mm T-slot rail (13), which is compatible with various connecting and accessory parts for 6-slot profile systems. This enables installation in appropriate systems and installations as well as the attachment of accessories to the light box.
On each of the short sides of the light box, there is a fixed sliding block (12) in the T-slot (13) (fig. D). The free internal M5 threads of the sliding blocks are intended for fastening the support bracket (14), which is available as an optional ac-cessory (fig. F). This support bracket can also be used to mount the light box on a wall (fig. G).
If required, e.g. for fastening other connecting and accessory parts with M5 connection thread, the sliding blocks (12) can also be moved after loosening the respective set screw (11).
Two square nuts (10) with M6 thread are included in the scope of supply for fastening connecting parts and acces-sories with M6 connection thread. These can be inserted at the corner connectors of the light box and from there pushed into the T-slot (13) (fig. E).

Maintenance and care

The devices are maintenance-free. Make sure that the illumi-nated area (1) is free of stains and dirt. If necessary remove these before operation.
Clean the devices with a soft dry cloth. On no account use petrol or other solvents.

Specifications

2479 prolite LED 37/25 Light Box

• Illuminated area: 37 x 25 cm (14.6 x 9.8 in.)
• Light source: 135 SMD LEDs
• Color temperature: approx. 6000 Kelvin
• Color rendition index: CRI: 95
• Light density: 9400 cd/m2
• Operating voltage: 24 V
• Rated power: 29 W
• Dimensions (WxHxD): 439 x 54 x 343 mm (17.3 x 2.1 x 13.5 in.)
• Weight: 3.12 kg (6.9 lbs.)

2480 prolite LED 50/37 Light Box

• Illuminated area: 50 x 37 cm (19.7 x 14.6 in.)
• Light source: 270 SMD LEDs
• Color temperature: approx. 6000 Kelvin
• Color rendition index: CRI: 95
• Light density: 10000 cd/m2
• Operating voltage: 24 V
• Rated power: 58 W
• Dimensions (WxHxD): 594 x 54 x 439 mm (23.4 x 2.1 x 17.3 in.)
• Weight: 5.14 kg (11.3 lbs.)

Mains adapter

• Input: AC 100-240 V, 50/60 Hz
• Output: DC 24 V, 2.5 A

Accessories

• 2482 Swivel bracket (support bracket / wall mount) for 2479, comes with mounting accessories and 2 neodymium magnets
• 2483 Swivel bracket (support bracket / wall mount) for 2480, comes with mounting accessories and 2 neodymium magnets
• 2485 Neodymium magnets, 4 pieces
• Subject to errors and technical changes.
• All specifications are approximate.

Kaiser Fototechnik GmbH & Co. KG
Im Krötenteich 2 · 74722 Buchen · Germany
www.kaiser-fototechnik.de

References

• Kaiser Fototechnik

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>