tuya NAS-AB02WT WiFi Smart Home Sensors Instruction Manual

tuya NAS-AB02WT WiFi Smart Home Sensors

Specifications

• LED State: Device Status
• Smart Wi-Fi Mode/Bluetooth Mode: AP Mod/Bluetooth Mode
• Reset: LED State Indicator flashes quickly; Indicator flashes slowly. Press the reset button for 6 seconds and the buzzer will sound.

Product Configuration

• Siren alarm x 1
• USB cable x 1
• 3M sticker
• Temperature and humidity probe
• Indicator USB power port
• Mounting hole
• Screw pack
• User manual x 1

Installation
Battery Installation/Removal

1. The battery can be replaced by turning the back case counterclockwise. After replacement, buckle the back shell and then rotate clockwise.
2. Align the mounting hole on the back of the siren alarm with the screw and hang it.

Installation Steps

1. Please use USB power supply as a priority; the battery is for power failure backup and standby for special circumstances. Remove the battery insulation sheet when using battery power.
2. Reset the device before installing and adding the app.

Wall Mounting
Nail screws into the wall position to be installed, leaving 2-3mm.

Paste Installation
Clean the back cover and the location where it needs to be pasted before pasting. Tear the 3M sticker, stick it on the back of the siren alarm, and attach it to the desired location.

Add Device
The device is in pairing mode by default (indicator light blinks). If not, press and hold the reset key for 6 seconds before adding the device.
Note: The device only supports 2.4GHz Wi-Fi signals.

Functions and Settings
Main functions, working status, and record settings:

1. APP main interface: No alarm status, Alarm status
2. Main functions: Alarm records, History records of temperature and humidity, Temperature and humidity alarm range setting, Alarm duration and alarm sound type setting, Temperature unit switch, Push notification (no push sent after closing app, device function unaffected), Alarm sound volume setting

FAQ

1. Q: How to reset the device?
   A: Press the reset button for 6 seconds until the LED indicator flashes slowly and a buzzer sound is heard.

2. Q: What kind of batteries does the device use?
   A: The device uses a specific battery that can be replaced by following the instructions in the manual.

3. Q: How do I add the device to my Wi-Fi network?
   A: Ensure your Wi-Fi signal is 2.4GHz, follow the pairing instructions provided in the manual according to your preferred mode (Wi-Fi/Bluetooth).

Thanks for
Choosing our WiFi Smart Home Sensors

Specifications

Siren with humidity and temperature sensor Trigger alarm，make sound and light

• USB power supply: 5V/1A,Micro USB
• Backup Battery: CR123A – 3V x 2
• Alarm sound: 90dB – 1 meter
• Wireless distance: 45M
• Wireless type: 2.4GHz
• Wireless standard: IEEE 802.11b/g/n
• Bluetooth version: Bluetooth 5.0
• Type of alarm ring tone: 18
• Alarm duration: 0-1790s
• Detection temperature: 0 – 50℃
• Detection humidity: 1%- 95%
• Detection accuracy: Temperature:±1.5℃
• Humidity:±5%
• Working temperature: 0℃ ～ 50℃ (32°F～122°F)
• Working humidity: 1% ～ 95%RH(non-condensing）
• Size: 68mm x 68mm x 33mm

LED State

Packing details

Product Configuration

Installation

How to install/remove the battery

1. The battery can be replaced by turning the back case counterclockwise.
2. After replacement, buckle the back shell and then rotate clockwise.

Installations Steps

1. Please use USB power supply in priority，the battery is only for power failure and special circumstances backup, can continue to standby for two days; In the use of battery power please remove the battery insulation sheet.
2. Please reset the device first and then add the app before installing it.

Wall Mounting

1. Nail the screws into the wall position to be installed, leaving 2-3mm;
2. Align the mounting hole on the back of the siren alarm with the screw and hang it.

Paste Installation
Please clean the back cover of the alarm and the location where it needs to be pasted before pasting to prevent it from falling off.

1. Tear the 3M sticker and stick it on the back of the siren alarm;
2. Then the siren alarm will be attached to the location to be installed.

Get Started

Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.

Register and Login

1. Run “Smart life”application from your smartphone.
2. Register and login

Add Device
By default, the device is in pairing mode (indicator light blinks); if the reset button indicator light is not on, please press and hold the reset key for 6 seconds and then add the device.
Note: The device only supports 2.4GHz Wi-Fi signals.; this manual takes the socket as an example, and the products are added in the same way.

Select the right device type to configure

Bluetooth pairing(suggested)
Method 1: Active Bluetooth in Mobile phone to add the device through Bluetooth mode (the standby mode can be added with Bluetooth)

Method 2: After activating Bluetooth, enter the APP interface, the device will be automatically searched by Bluetooth, and then click “Add”

Smart Wi-Fi pairing
Press the reset button until the device flashes slowly (pairing mode) and add (follow the APP tips)

AP compatible mode pairing
Press the reset key until the device flashes slowly (pairing mode) and add (follow the APP tips)

Functions and Settings

Main functions, working status and record Settings

APP main interface

Main functions
Alarm records

Push notification
No push will be sent after closing the app, device function is not affected

History records of temperature and humidity

Temperature and humidity alarm range setting

Alarm duration and alarm sound type setting

Temperature unit switch

Alarm sound volume setting

Timer settings

Other Function

Share device
Device sharing

Member sharing

Create scene(Product linkage)
e.g.: PIR detects a person, linking the siren alarm to send an alarm

Notifications settings

The screenshot shows all push settings of APP; turn off push here, all devices in APP will not send notification, but it will not affect the message records.

Restore Default
Deleting the device through the app will clear the data and restore the default values

Due to the app update, the above interface is for reference only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>