TUYA B2 Pro Smart WiFi B2 Pro Lock Smart WiFi Fingerprint Lock User Manual

TUYA B2 Pro Smart WiFi B2 Pro Lock Smart WiFi Fingerprint Lock

ATTENTION

The lock comes with” English “voice as standard ,and you can switch to other language by the following operations

Accessories

Door thickness Quality|

Connecting square bar

|

Connecting stud

|

Connecting screw

| Screw
---|---|---|---|---
35-39mm| 8880mm| 4535mmx2| M430mmx2| 4.225mmX4
40-S0mm| 8880mm| 4535mmx2| M445mmx2| 4.225mmX4
51-60mm| 8890mm| 4545mmx2| M445mmx2| .225mmX4

Product overview

Specification

invalid after you reset the administrator.
Lock type| Support single bolt, 5072/4585/6085/050/5572 / KS insert tenon
Virtual password| Available
Number of users| IC card+ password+ fingerprint :250 groups, 9 groups of administrators

Installation guide

Door opening direction selection

1. Right handle opening
   

2. Left handle opening
   
   

Adjust Right Handle and Left Handle

Adjust the front panel handles left or right

1. Remove the reversing screws on the front panel using a screwdriver

2. Turn the handle 180
   
   

3. Turn your hand to the left

4. Reinstall the reversing screws 9 and tighten them

Adjust the back panel handles left or right

1. Insert the screwdriver into the handle hole and unscrew the screw

2. Pull out the handle and turn it 180
   

3. Turn the handle to the left and attach the handle shaft

4. Reinstall the screw and tighten it
   

Notes for mortise lock

Double deadbolt

When double deadbolt is used, the arrow of the handle hole on the front panel must point in the same direction as the handle

Single deadbolt

When Single deadbolt is used, the arrow point of the handle hole on the front panel must face upward

Double deadbolt mortise lock internal and external conversion

Information and Safety Warnings

1. introduce
   This user manual will introduce the functions and usage of this smart lock. It is important that you follow the instructions and note all comments that appear in this manual. Please refer to this manual before attempting to use this lock. If you have any questions not answered in this manual or require unconventional service, please call our customer service line or send us a FAQ.

2. Safety warning:
    When reading this manual, pay attention to the following notes. notes must be read and follow it to prevent injury or damage to the lock.
   Common usage:

   • This lock can only be used in the manner described in this manual.
   • All parts of the inspection lock are included. If any parts are missing, please contact our service staff.
   • There is a protective film on the front touch screen. If there is a scratch on the protective film, please remove the protective film when necessary.
   • Please use 4 AA batteries. Do not mix old and new batteries or other zinc-manganese batteries. As described in this manual, do not leave batteries outside items are inserted into the lock.
   • Before starting installation, please ensure that all surfaces are flat, mounted on the door or have any type of defects such as gaps or warping, The lock may fail or become completely inoperable.
   • Do not apply any detergent directly to any part of the lock. When cleaning, only use clean water or mild cleaner in soft non – grind clean on the cloth.
   • Locks must be used with the Tuya APP. The lock works without an APP, but only when using an app can realize the complete function.

3. Terms of Sale and Service

   • Please read the instructions carefully before use!
   • 1 year electronic warranty.
   • This product comes with a 1-year limited warranty on electronic parts. Limited warranty on mechanical and surface quality against defects in materials and workmanship under normal use. Proof of purchase and ownership is required for the warranty to take effect. Please feel free to contact us for any errors or problems in our manual or after sale terms.,
   • Wear not responsible for compensation or free maintenance for damage caused by human factors or unavoidable causes. Please check our after-sales service terms.
   • Non-technical personnel do not remove the lock at will. If necessary, please operate under the guidance of technical personnel.
   • Note: The product picture may be slightly different from the actual product, please refer to the actual product.
   • After replacing the battery, please do not discard it at will. Please return the battery to the recycling station to avoid environmental pollution!

Installation steps

1. Install mortise lock
   

2. Install the front panel
   
   

3. Install the back panel
   

4. Install batteries
   

5. Install Strike plate & Strike box
   

The menu structure is shown in the figure

Precautions before operating the smart lock

1. Electronic switch button setting
   By default: The default administrator password is 123456. You must change this password in order to set the network. You cannot set the smart lock through Tuya APP under the default password 123456 in the factory state, and the electronic lock button is also unlocked!
   Only the administrator has permission to open the lock:
   Press once, voice broadcast:
   The door was locked

Both administrators and common users can open the lock:
Press it again to hear the voice broadcast::
The lock is off
Note: Press the electronic lock switch once to unlock, and press the lock again to close.

2. Other precautions
3. The administrator can be a password/fingerprint or IC card, which you can set according to your own requirements. There are 9 administrators in total.
4. Press the# key to confirm and press* to return to the previous step. If there is no operation within 10 seconds, the lock will exit the setting.
5. After 5 incorrect unlock, the keyboard will be locked for30 seconds, during which time no operation will respond.
6. If you enter the wrong password for more than 5 consecutive times, the keyboard will be locked for 30 seconds. The system will not respond to any operation within 30 seconds.
7. Password anti-snooping function: enter the password as follows when opening the door :XXX password XXX; You can add some irrelevant codes before and after the password and press# to confirm. The password must be included in the input.
8. When the voltage is lower than 4.8V, it will automatically alarm every time you open the lock, and be sure to replace the new battery as soon as possible.
9. Hold down the “SET” key on the rear panel for 6 seconds (turn on the indicator 654321 at the same time) to restore the system to factory defaults. The initial management password is 123456.
10. After unlocking, enter “5” +”#”successively, and the lock will enter the normal opening mode (this setting is valid for this time. Enter the unlocking information again and then close the lock.
11. After unlocking, press”*” to play the current unlocking information number.
12. After opening the electronic locking function, only the administrator can open the lock; Privacy features.

Smart lock operation

1. Initialization Settings
   Please note: Before you can start using this lock, you must register a new administrator. If not, you cannot configure a Wi-Fi-enabled lock. The procedure is as follows:
   
   

2. Add the administrator password
   Press [*]➔ [#]
   Enter administrator information
   
   Input initialization Password 123456
   
   Press [1] Administrator Setting
   Press [2] User Setting
   Press [31 System setting
   Press [4] to restore factory Setting
   
   Press[l]to add an administrator
   Press [2] to delete the administrator
   Press [3] Network setting
   
   Enter administrator information.(123)
    Enter 4-8 digits new password, press[#] to confirm
   
   Enter the same again Password, press[#] to confirm
   Please enter again
   
   You can continue to add Administrator IC or password
    Successful setting Please enter the unlocking information
   
   

3. Delete the administrator password
   Press[1]
   
   Enter administrator information
   
   Enter the administrator password
   
   Press [1] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[2] Press[l]to add an administrator
   Press[2]to delete the administrator
   Press [3] Network Settings
   
   Enter a sequence number, eg.003,press[#]to confirm
    Enter the number, Press [#] to confirm
   
   You can continue to delete Administrator password
    Successful setting
   

4. Add user password
   Press [*]➔ [#]
   
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [1] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[l] Press [l] to add a user
   Press [2] to delete the user
   
   Enter 4-8 digits password, press[#] to confirm
    Enter user information
   
   Enter 4-8 digits password, press[#] to confirm
    Enter the same password again
   
   Continue to add user passwords
    Successful setting
   Successful setting

5. Delete the user password
   Press [•] ➔ [#]
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [l] Administrator Setting
   Press [2] User Setting
   Press [31 System Setting
   Press [4] to restore factory Setting
   
   Press[2] Press [l] to add a user
   Press [2] to delete the user
   
   Select [l] to delete a user
   Select [2] to delete all users
   Select [l] to delete a user
   Select [2] to delete all users
   
   Continue deleting user passwords
    The user number is successfully delete press[#] to confirm
   

6. Add user IC card
   Press [•]➔ [#]
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [l] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[l] Press [1] to add a user
   Press [2] to delete user
   
   Touch the IC card to the sensing area
   
   Continue to add other user IC cards
    Successful setting
   

7. Delete the IC card information
   Press [•]➔ [#]
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [l] Administrator Setting
   Press 121 User setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[2] Press [l] to add a user
   Press [2] to delete user
   
   Press [1] to delete a user
   Press [2] to delete all users
   Press [1] to delete a user
   Press [2] to delete all users
   
   Continue to delete the user IC card
    The user number is successfully delete press [#] to confirm
   

8. Add user fingerprint information
   Press [•]➔ [#]
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [l] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[l] Press [l] to add a user
   Press [2] to delete user
   
   Enter the fingerprint in the sensor fingerprint area 4 times
   Enter the unlocking information
   
   Continue to add other user fingerprints
    Successful setting
   

9. Delete the user fingerprint
   Press [*]➔ [#]
   Enter administrator information
   
   Enter the administrator password
   
   Press[2] Press [1] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[2] Press [l] to add a user
   Press [2] to delete user
   
   Press [1] to delete a user
   Press [2] to delete all users
   Press [1] to delete a user
   Press [2] to delete all users
   
   Enter the user number and press[#] to confirm
   Enter a user number, eg. 010
   
   OR
   Press[2] Press [2] to delete all users
   

10. System setting
    Press [*]➔ [#]
    Enter administrator information
    
    Enter the administrator password
    
    Press[4] Press [1] Administrator Setting
    Press [2] User Setting
    Press [3] System Setting
    Press [4] to restore factory Setting
    
    Enter administrator information
    
    Successful initialization
    
    Note: You can follow the sound prompt to unlock type/language/lock time and other Settings, these features are designed for some special cases.

11. Restore factory setting
    Press [•]➔ [#]
    Enter administrator information
    
    Enter the administrator password
    
    Press[4] Press [1] Administrator Setting
    Press [2] User Setting
    Press [3] System Setting
    Press [4] to restore factory Setting
    
    Enter administrator information
    
    Successful information
    
    

Zigbee Configuration (Optional Tuya Zigbee)

1. Add an administrator (if added, skip it);

2. Search “Smart Life” in the App store or APP store to download the app and install it.

3. Register and log in with your mobile number.

4. Add a gateway according to the gateway operation instructions;

5. Press the “Smart Life” interface to find the security sensor, record the “Door lock Ziqbee”, click and complete the device addition and use

6. prompted: (You can also add a door lock by adding a child device under the gateway interface)

7. Add a network:
   a. Press*+# to verify the administrator, press 1 to enter the administrator Settings, and press 3 to configure the network for voice broadcasting
   b. Voice announcement: “Operation succeeded” when the addition is successful; Voice broadcast “Add failed” after timeout;

8. Remote unlocking: Enter the correct password on the door lock interface to confirm;

Add remote control (optional)

1. Add an administrator (if added, please skip it):
2. Add remote press, please refer to add common users.
3. Press any button on the remote control to indicate successful operation

Tuya APP operation (optional function)

1. Download the Tuya APP
   Please download Tuya Smart or Smart Life from the Apple Store or App Market,
   You can also scan the QR code on the right to download the APP directly.
   

2. Register an account.
   Please use your email or mobile phone number to register an account.
   

3. Sign up
   

4. Register with email or mobile phone number to get verification code
   

5. Fill in the verification code
   

6. Set the password to complete the registration
   

7. Network Settings
   Press [•]➔ [#]
   
   Enter administrator information
   
   Enter the administrator password
   
   Press[l] Press [1] Administrator Setting
   Press [2] User Setting
   Press [3] System Setting
   Press [4] to restore factory Setting
   
   Press[3] Press [1] to add an administrator
   Press[l]to delete the administrator
   Press [3] Network Settings
   
   Press [1] to connect, to the hotspot
   Press [2] Smart Connect
   
   Note: There are two connection modes under this manual:
   hotspot connection, Smart connection, and Bluetooth connection (dual module).

8. Intelligent Connection (EZ mode)
   Please open the Tuya Smart APP and select WiFi lock under “Security and Sensors”. Please ensure that the privacy button is unlocked. If it is locked, WiFi connection cannot be configured.
   Step 1
   Select Lock (WiFi) under the “Security & Sensors” category
   
   Step 2
   Enter the WiFi password and click Next.
   
   Step 3
   Confirm the rapidly blinking number 5 and click Next.
   
   Step4
   Scanning equipment
   
   Steps 5
   Adding a device succeeds
   
   Step 6
   Interface to edit the name of the lock
   

9. Hotspot Connection (AP mode)
   Please open the Tuya Smart APP and select Wifi lock under “Security and Sensor”.
   Please ensure that the privacy button is unlocked. If it is locked, Wifi connection cannot be configured.
   Step 1
   Select Lock (WiFi} under the
   “Security and Sensors” category
   
   Step 2
   Enter Wifi password and click Next.
   
   Step 3
   In the upper right corner, select AP Mode.
   
   Step 4
   Confirm the rapidly blinking number 5 and click Next.
   
   Steps 5
   Connect to mobile hotspot, click “Go to Connection”
   
   Step 6
   Find Smart life-xxx and connect
   
   Step 7
   Scanning equipment
   
   Step 8
   Adding a device succeeds
   
   Step 9
   You can edit the lock name
   

10. BLE Quick connection
    This is an additional form of BLE connection. This operation should be performed in AP or EZ mode state (5 blinking). A window pops up as follows:
    Step 1
    The window for adding a device is displayed
    
    Step 2
    Enter the Wi-Fi password and click Next.
    
    Step 3
    Place your phone near your router and lock it to the cloud
    
    Step4
    connection
    

11. Remote unlock function
    When visitors press the numbers 9 and# in sequence, there is a remote unlock request in the App sent to the administrator as a photo, you can cancel the operation by pressing “agree to unlock” or “refuse to unlock”.
    
    

Customer Support

Search on the mobile app market or the Apple Store
“Tuya Smart” or “Smart Life”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>