tuya LR03 Magnetic WiFi Smart Door Alarm Detector User Manual

October 30, 2023
Tuya

tuya LR03 Magnetic WiFi Smart Door Alarm Detector

tuya LR03 Magnetic WiFi Smart Door Alarm Detector

Please read this manual carefully before use and keep it for future reference.

Specifications

Input voltage: DC3V LR03
Quiescent Current:   < 10uA
Alarm Current: s160mA
Low power under voltage: <2.7V
WiFi: 802.11 b/g/n
Magnetic control distance: > 15mm
Working temperature: -10-50 °C
Working humidity: max 95%RH

How to use

  1. Push the mounting bracket upward and take out the bracket, then insert the battery.
    How to use

  2. Put the battery into the battery bin and place it according to the graphics in the battery bin. After two batteries are loaded, the indicator lights are always on and then off.
    How to use

  3. Download TUYA Smart APP in app store or google play store, or scan the following QR code

  4. Register with mobile phone number, click “My Home” interface “+” or click “Add Devices” in the middle blank.
    Select the security sensor and click on the door magnetic sensor.
    How to use

  5. With the card pick-up pin in the accessory package, hold the reset key for more than 5 seconds, and the indicator flashes into the automatic network connection mode. Enter the WiFi password according to the prompt, and click to confirm.
    How to use

  6. In the automatic network connection mode, the indicator flashes quickly, holds the reset key for 5 seconds with the card pick-up pin, the indicator flashes slowly, and enters the manual network connection mode. APP chooses compatible mode. According to the prompt, enter “WiFi password” and click confirmation, then switch to the WIFI settings interface. Connect Smartlife_XXXX network and return to APP to continue adding devices.
    How to use

  7. Network connection successfully, click on the door magnetic icon to enter the interface, open the door magnetic, APP will remind you the door is open, close the magnet door magnetic APP will remind you the door is closed.
    How to use

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications  to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies  with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals