tuya BLE Version Smart Cylinder User Manual
- October 27, 2023
- Tuya
Table of Contents
User Manual-Smart Cylinder
TUYA BLE VERSION
Smart your life!
Version 1.0 Edition S1
Packing Accessories
Please check the packing box and accessories when you got the item in hand.
Product Specification
Reader View
Dimension
INSTALLATION STEPS
5.1 Please use the screw driver to take off the screw on the back knob position, refer the below Pic.1:
5.2 Please insert the cylinder to the existed lock and fix the cylinder with the long screw as picture 2.
5.3 Please use the screw driver to fasten the screw on the back knob position, refer the below picture 3:
5.4 Please take off the reader cover with the magnet or sucker (included in our accessories bag),assemble 1xCR123a alkaline battery, refer the below picture 4:
Notice after you insert the key into the key hole and turn clockwise, you
shall turn the reader to unlock the door but not to use the key to unlock the
door directly.
5.5 Please test with your fingerprint under the factory state, any fingerprint
will unlock the door lock, refer the below picture 5:
5.6 Please test the lock with key card after you configure the lock with Tuya smart APP(Refer the Part 6).
Notice the keycard or fingerprint can only be enrolled by the Tuya smart APP, so it is important to install this app in your mobile before start daily use.
Tuya APP Settings
Please download the Tupamaro or Smart life on Apple store or Google play. also you can scan the QR code below to download the APP directly.
|
---|---
https://smartapp.tuya.com/tuyasmart| https://smartapp.tuya.com/smartlife
6.1 Please register one account with your E-mail or mobile number.
6.2 Intelligent Configuration
Please run the Tuya smart APP and click “Add Device” on the right top position
for auto scan:
6.3 Function Description
Under Tuya smart APP interface, you can see the features for the smart locks,
such as Member /unlock records and settings etc.
6.4 Add User Fingerprint
Under Tuya smart APP setting, you can click the fingerprint management and add
the fingerprint.
6.5 Add User Card
Under Tuya smart APP setting, you can click the card Management and add the
card.
6.7 Smart Linkage and Settings
Under the settings, you can click the smart linkage for more scene and more
options for the features upon the using condition.
6.8 Passage Mode
Under Tuya smart APP setting, you can tick”automatic lock switch”, under this
settingthe lock will be in always open state, you can press any valid
fingerprint to cancelthis passage mode.
Reset the Lock
Under Tuya smart APP setting, you can click the “Remove Device” to reset thlock and the lock will be set to factory state, you can use any fingerprint to unthe lock.
Sales and Service Terms
- Please read the manual carefully before use!
- Limited 1-year Electronic Warranty Limited Lifetime Mechanical and Finish Warranty
- This S1 product comes with a 1-year Limited Warranty on Electronic Parts and a Limited lifetime. Mechanical and Finish Warranty against defects in materials and workmanship under normal use to the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.
- Any error or question in our manual or sales term, please feel free to contact with us.
- For any wrong operation or installation to the user, we do not responsible for the duty.
- For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain for free, please check our after sale service terms.
- Please do not take apart the lock if you are not technician, if necessary, please make the operations under the guide of technician.
- Notice: there maybe a little difference for product pictures with real product, please subject to our real products.
FCC warnings
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Smart your life!
Version 1.0 Edition S1
Documents / Resources
| tuya
BLE Version Smart
Cylinder
[pdf] User Manual
S1, 2AXUJ-S1, 2AXUJS1, BLE Version Smart Cylinder, BLE Version, Smart
Cylinder, Cylinder, BLE Cylinder
---|---