SLV 132660 Series Pendant Light Instruction Manual
- August 24, 2024
- SLV
Table of Contents
SLV 132660 Series Pendant Light
Product Specifications
- Model : Pendant Light 132660
- Compatible Bulb Type: E27, max 60W
- Safety Class: II (2)
- Installation : Requires expert electrician
- Indoor Use Only
Product Usage Instructions
Safety Instructions:
- Installation should be done by an approved electrician following local and national regulations.
- Do not alter or modify the product in any way.
- Do not cover the product or attach anything to it.
- If there is suspicion of a defect or malfunction, stop using the product and contact a qualified electrician or dealer.
- Ensure children are not harmed by the product.
Lamp Replacement:
- Disconnect the luminaire from the power source and allow it to cool down before replacing the bulb.
- Use only E27 bulbs with a maximum power of 60W.
Cleaning and Maintenance:
- Disconnect the product from the power source before cleaning.
- Clean the external surfaces regularly with a slightly damp cloth.
- Store the product in a dry and clean place.
Installation:
- Ensure the mains power is switched off before installation.
- Use only the recommended accessories for installation.
- Connect the product using a suitable track adapter or ceiling canopy as instructed in the manual.
- Check for secure fixation and proper functioning after installation.
Electrical Connection:
- Connect the product only to the load terminal (LOAD).
- Equip flexible wire ends with suitable wire ferrules for connection.
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Technical Details are subject to change.
Operating Manual PART B Pendant Light 132660 …61 …62
Read manual carefully and keep for further use!
- Safety advice for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Additional safety advices
Use as directed
- Safety class II (2) – Safety insulated – Connection without protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
- Disconnect luminaire from mains and let it cool down.
- Suitable light sources: E27, 60W max.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable! Use only described accessories.
- Connect the product with a suitable track adapter (see fig.) or a suitable ceiling canopy (see fig.). Notice supplied manuals.
Electrical connection
- Connection only on load terminal (LOAD)
- Equip flexible wire ends with suitable wire ferrules!
- Check secure fixation and proper function!
© 03.02.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0.
Made in China.
FAQ
Q: Can I use a bulb with higher wattage than 60W?
A: No, it is recommended to use bulbs with a maximum power of 60W to prevent
overheating and potential hazards.
Q: Is it safe to install the pendant light without expert knowledge?
A: No, the installation should only be carried out by an approved electrician
to ensure safety and compliance with regulations.
Q: How should I clean the product?
A: Clean the external surfaces with a slightly moistened cloth and ensure the
product is disconnected from the power source before cleaning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>