Zmodo ZM-W0002-2 Outdoor Wireless Home Security Camera Quick Start Guide

Zmodo ZM-W0002-2 Outdoor Wireless Home Security Camera

Mobile Setup

This quick start guide will help you configure your WiFi camera kit for initial use. Before performing any permanent installation, we recommend that you complete the mobile setup in Section 1 to connect your cameras and make sure that nothing was damaged during shipping.

Before you begin

• Plug in and power on all cameras near your router for initial setup. Fasten the antennas (if applicable) onto the cameras.
• Make sure that you have a strong WiFi connection at the location of your cameras.
• Make sure you know the SSID (WiFi network name) and password of the 2.4GHz WPA-PSK/WPA2-PSK WiFi network that you want your cameras to connect to. Your network cannot be hidden.
• Make sure your network has at least 1Mbps upload speed for each camera when live viewing or 2Mbps upload speed for each camera when using the cloud service.
• TM Download and install the “Zmodo” app from Google Play or the App StoreTM (compatibility: iOS 9.0+ or Android TM 4.0+). Launch the app and sign up for a free Zmodo account. All of your devices will be bound to this account.

We are constantly working to improve our product and app. Please visit www.zmodo.com/support for updated instructions, manuals, and more.

1. Log in and press the Add Device + option in the upper right corner of the Home Page.

2. Select the “QR Code” connection method to connect your device(s). Your device(s) will be added to your Zmodo account. You can follow the in-app instructions or refer to steps 3-9 to complete setup.

3. Power on your device(s). The status light will blink green when the device has powered on. Tap “Next” to proceed.

4. Turn up the volume on your phone for voice prompts during the mobile setup process. Tap “Next” to proceed.

5. Connect your phone to the 2.4GHz WPA-PSK/WPA2-PSK WiFi network that you want your device(s) to connect to (network cannot be hidden). Tap “Next” to proceed.

6. Enter the password of the WiFi that you want your device(s) to connect to. Please make sure that your WiFi password is correct. Tap “Next” to proceed.
   Note
   The WiFi password is case-sensitive.

7. Steadily hold your phone’s display in front of your Zmodo camera until you hear “Device connected”. The distance between your phone and the camera should be about 8 inches.

8. Name your device(s) and set a password for it. Tap “Next” to proceed.

9. Your device(s) have been successfully configured! Tap “Done” to finish. You can now share or view your device(s).

Mounting Your Cameras

Installation Requirements & Tips:

• If you’re installing your cameras outdoors, all wired connections must be weatherproofed.
• Before installing the cameras, carefully plan where and how they will be positioned, and how you will route the wiring that connects your cameras to the power adapters.
• Try to avoid WiFi signal interference from concrete, cement, and metal as much as possible. Do not place cameras in a location where these materials stand between your cameras and your WiFi router.
• Make sure that your cameras are within range of your WiFi network, and that your network meets all of the bandwidth requirements from Section 1.
• If you have a lot of obstacles between your camera and the WiFi router, the transmission range will be greatly reduced. In order to increase the range, you may purchase a WiFi range extender to place near the cameras.

Unplug the cameras that have been configured in Section 1

Line the camera bracket against the wall where you would like to install the cameras and mark the appropriate holes. Drill three holes slightly smaller than the wall anchors and use a hammer to gently insert the anchors into the wall. Fasten the three screws through the holes on the bracket and into the anchors as shown.

Note
Depending on the camera model that you purchased, the camera bracket may or may not be fastened onto the camera when first removed from factory packaging.

(image may vary for your specific camera model)

Fasten the bracket to the camera. You will be able to adjust the camera position using the adjustable camera bracket. Position the camera for an optimal viewing angle, and tighten the bracket.

Connect the supplied power adapter to the power port on the camera, and plug the adapter into a nearby power outlet. Repeat steps 1-4 for all cameras in your camera kit.

Recording and Viewing Options

Recording Options
This device is compatible with the cloud service. Please visit www.zmodo.com/support for more information and articles. The cloud service will allow you to:

• Record continuously and store footage on our secure cloud servers.
• Create and save video clips from your recordings.
• Access your footage and clips at any time from any location.
• Enjoy more smart features in the future!

Viewing Options
All of your Zmodo devices will be bound to your Zmodo user account. You can access your camera and other devices by using the Zmodo app with any Android or iOS device. Just download the Zmodo app from Google Play or the App Store . You can also access your devices from any web browser with our web app. Visit user.zmodo.com and log in with your Zmodo user account information.

Status Light Definitions

Your camera has an LED light that indicates the status of the camera. Please refer to the guide below:

Troubleshooting

If you were unable to connect your camera successfully:

• Make sure that you are connecting to a 2.4GHz WPA-PSK/WPA2-PSK WiFi network, and that your network is not hidden.
• Please make sure that you entered the network name and password correctly. Note: Both are case-sensitive.
• During the QR code scan, please make sure that your phone’s display brightness is high, and avoid glare on your phone’s display.
• Please make sure that your camera is not already bound to another user account.
• Make sure that you have fastened the antenna (if applicable) onto your camera, and try moving your camera closer to the router for the initial setup.

(Setting up multiple cameras) If you were able to connect some, but not all of your cameras:

• Power cycle the camera(s) that are not connected to the WiFi and repeat the setup process.

Note
You can check the status light of the device to see if it has been successfully connected to the WiFi or not. If the status light is blinking green, it means that it has not connected to a WiFi network. If it is solid blue, it means that it is already connected to the WiFi network.

Support

Having difficulty?

You can use the Live Chat function in the Zmodo app if you have any technical problems.

Please follow the steps below
Access the “Me” page in the lower right corner of the Zmodo app and select “Zmodo Support”.

For more instructions, troubleshooting, support, and other resources, please visit:
www.zmodo.com/support

Like us on Facebook.com/Zmodo 

Follow us on Twitter @Zmodo

Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple, the Apple Logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Frequently Asked Questions

Can I record with these cameras and if so what size sd card can I use?

Yes, you can record with these cameras. The home camera comes with a basic cloud plan that stores video alerts for 12 hours. This footage can not be stolen unlike the SD card, Moreover, the intelligent cloud recordings are to be saved for longer the cloud service can be purchased for 7 or 30 days. Besides, the Zmodo camera does not have an sd slot or internal storage.

What the pin out is at miniUSB connector at the camera side?

It looks like a mini USB connector but it is only used for A/C power. No data. Data transfer is only Wi-Fi via antenna. it comes with the appropriate adapter (about 6') to plug it into A/C.

What is the range of each camera so my Wi-Fi will reach each camera ?

The Zmodo outdoor security camera comes with an enhanced antenna, It can reach the wifi signal up to 260m away with no barrier. It also depends on your router and how many walls are in between. The best way is to test your router signal with the signal strength app. -60dbn is the worst, the Zmodo camera supports -50dbm.

How long do the cameras record or how often?

Do I have to use the manufacturer's app or can I use a hard drive?

As far as I know, the cameras cannot be connected to an external hard drive. I know the system records and stores video for 24 hours for free, you can also download it to your smartphone. Continuous recording is via their app for a fee.

Can I have 8 cameras on the system?

You can add as many Zmodo cameras as you need on the Zmodo APP. You can view 4 cameras simultaneously through Zmodo App.

Is these use battery or electrics?

You can power these off any standard USB battery that has at least a 1A output (with a micro USB cable), but don't expect it to last long. Even a 20,000mAh unit might last only 2 days. The capability to do so is useful when you are testing if you can get a good WiFi connection at a location prior to mounting the camera, but not very practical for powering the camera long term.

Can you put this camera in the window?

during the day it works fine out a window but at night the infrared lighting will reflect off the glass or screen and you won't see anything.

Can you view multiple cameras at the same time?

You can view 4 cameras simultaneously through Zmodo App, but you can group as many cameras as you want and view all by every 4.

Do i need someone to install this for me like a electronic person?

No electrician is needed. Simply plug them up into a power outlet and connect them to the wifi.

Can u still view the cctv through your cellphone even i am not in the house?

Yes. You login to the mobile app and you can view you cameras wherever you are.

Video – Features of Security camera

Download this PDF Link:Zmodo ZM-W0002-2 Outdoor Wireless Home Security Camera Quick Start Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>