muse M-1938 DJ Portable Speaker User Manual

muse M-1938 DJ Portable Speaker

LOCATION AND DESCRIPTION OF CONTROLS

1. MIC. 1 Jack

2. MIC. 2 Jack

3. USB PLAY / USB CHARGE port

4. AUX IN Jack

5. ECHO Button

6. M.VOL Button

7. EQ Button

8. MEGA BASS Button

9. LIGHT MODE Button

10. MIC. PRIO Button

11. TONE Button

12. MIC. VOL Knob

13. VOL Knob

14. STANDBY Button

15. MODE Button
    REPEAT Button

16. Button (Previous)

17. (Play/Pause)
    (Stop)
    ATS (Automatic search and storage)

18. Button (Next)

19. Button (Fast Rewind)

20. Button (Fast Forward)

21. Display

22. Color Lights

23. Light knob

24. Speakers

25. Telescopic pulling handle

26. FM Antenna

27. Power On/Off Switch

28. DC IN jack

29. Wheels

30. Charging indicator

ACCESSORIES

• AC/DC adaptor x 1
• Wire microphone x 1
• Wheels x 2

POWER SUPPLY

Using the AC adaptor

The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V 50/60Hz and should only be connected to a mains supply within these parameters.

Cautions:

• The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
• Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being damaged.
• When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
• Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
• Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a qualified service agent.

Using the Built- in battery

The unit has a built-in rechargeable battery (Lead-acid). Charge the built-in battery before using it for the first time. The charging indicator will light red and will be off after fully charge.

Warnings:

• Recharge the built-in battery when you are ready to use it again.
• While using the built-in battery, the environmental temperature should be 5°C (41°F) to 35°C (95°F).
• To get the longest service life of the built-in battery, charge at indoor-temperature.
• The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate.
• The unit should not be exposed to excessive heat such as sunshine, fire or the like.
• When discarding the unit, environmental problems must be considered and local rules or laws governing the disposal of such products must be strictly followed.
• When the built-in battery power is low, a warning sound will be heard.

Note:

In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no control is operated on the device for a period of 20 minutes, the unit will automatically switch to Standby mode

GENERAL OPERATION

1. Connect the AC adaptor to the unit and wall outlet, press the POWER switch to power on the unit, and the display will lights up. Press button to enter standby mode,

2. Press the MODE button repeatedly to switch to desired mode: Bluetooth / FM/AUX / USB.
   Note : Only insert USB driver or 3.5mm audio cable could switch into USB or AUX mode.

3. During Playback:

4. Rotate the VOL knob to adjust the level as desired.

5. Press the EQ button to set EQ (equalizers) mode as desired: FLAT(normal)/CLAS (classic)/ rOC(rock)/ POP/ JAZZ/ LIVE/ CLUB/ DANC(dance)/ HALL/ SOFT.

6. Press button to play or pause.

7. Press the button to skip to the next track. Press the button to skip to the previous track.

Note:

• REPEAT functions only wor k in US B m ode.
• MEGA BASS : It is a separated bass mode can be selected when there is audio signal.
• TONE : When there is audio signal, press this button to select treble or bass
• When finished listening, press the POWER switch to turn off the unit.

LISTENING TO THE RADIO

Manual search

1. Connect the main unit to the wall outlet and power on the unit as previous procedures.
2. Press MODE button repeatedly until the FM frequency appears on the display.
3. For best reception, extend the FM wire antenna.
4. Adjust the volume by VOL to the desired level.
5. Press / for step forward/rewind to search located station manually; press and hold / for step forward/rewind to search located station automatically until one station is found then unit will stop to search.

Automatic search and storage

Press and hold the ATS button, the automatic search located strong station, and the unit will save the first 60 FM stations automatically. Press the button again to stop the operation. When you store on a channel already been preset, the previous station will automatically be cleared and replaced by the new station.

Note:

During the search operation, the sound level is automatically muted

Preset stations

This unit can store 60 FM stations.

Listen to station presets

Press or repeatly as many times as necessary to select your station.

USB PLAYBACK

You can connect a USB flash drive (not included) to the USB port on the unit to play MP3 files.

1. Insert USB driver, the unit will read USB driver and play music automatically as “USB” appear on display.
2. Press to suspend momentarily the playing track. Press again to resume playing.
3. Press and hold to stop the playback.
4. Press button to skip to next track and to skip to previous track. Press the or button for step forward/rewind to search.
5. Press and hold REPEAT button to select to repeat current track or repeat all tracks.

Note:

• The unit will automatically switch to USB mode and start playback when the USB flash drive is connected.
• The unit is compatible with the following Memory Device (Source): USB flash drive.
• Supporting format: MP3 (32kbps-320kbps), WMA, WAV.
• The total number of MP3 files on the Memory Device should not exceed 9999.
• There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device is not supported

LISTENING TO AUXILIARY SOURCE

1. Connect your auxiliary source (e.g. iPod / iPad / MP3 player) to the AUX IN jack (3.5mm ).
2. Press the button to turn on the unit. Press the MODE Button repeatedly until the “AUX” appears on display.
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUX jack.

USB CHARGER- A Power USB Port

Connect your device to USB cable (not included) and plug the standard USB plug into the USB charging port on the top of the unit.

NOTES:

• The maximum output from the USB charging port is DC 5V, 1A. You can charge any rechargeable USB devices charging current less than it, such as iPod, iPhone, iPad, MP3 Player…etc.
• Charging function is available in Standby mode. Charging function is not available in USB mode.
• Some devices may be incompatible.
• When the USB charging cable is connected to the unit, music playback in Bluetooth mode will suspend. Press to resume playback

BLUETOOTH PAIRING & LINKING OPERATION

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

1. Turn off the Bluetooth functionality of other devices that were paired with your unit.
2. Press the button to turn on the unit.
3. Press MODE button until “bt” appears on display.
4. On the Bluetooth device, enable Bluetooth and select “M-1938 DJ” from the Device List.(Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a passcode, use “0000”. Some Bluetooth devices will ask you to accept the connection. If the units are paired properly, you will hear the confirmation music.
5. You can disconnect current device directly by long pressing button

Hereby, NEW ONE S.A.S, declares that this MUSE M-1938 DJ is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse- europe.com

Play MUSIC from Bluetooth devices.

Make sure the Bluetooth connection between the unit and the device is active.

1. Press to suspend momentarily the playing track. Press again to resume playing.
2. Press button to skip forward to next track and to skip backward to the previous track.
   Note: and buttons may not work with some of the players in your Bluetooth source.

SINGING THROUGH MIC JACK

1. Sing along with the music by plugging in the provided microphone into either one of the MIC (1/2) jacks on the unit.
   Notes:

2. Press the M.VOL button, then rotate the MIC. VOL to adjust the volume as desired.

3. If the microphone is placed near the loudspeaker, a howling effect (acoustic feedback) may occur. If this happens, place the microphone away from the loudspeaker.
   Warning: Tapping or dropping the microphone can permanently damage your microphone. Resist the urge to swing the microphone around by the cord.

4. MIC. PRIO: press the MIC. PRIO button. It make the mic.volume louder than the music volume during singing. Press the button again to resume.

5. ECHO: adjust the ECHO control to enhance the singer’s voice for a concert hall effect. By pressing the ECHO button, and rotating the MIC. VOL knob to adjust it

ADJUSTING THE LED LIGHTS

• Rotate the light knob to select the projection effect of top LED light.
• Select the Light Modes.
  • No audio signal, the lights will flash slowly. Press the LIGHT MODE button to adjust the color of speaker lights, and there are 8 kinds of modes for selection.
  • With Audio Signal, the lights will flash along with the music. Press the LIGHT
    MODE button to adjust the color of speaker lights, and there are 9 kinds of light modes for selection.

TROUBLESHOOTING GUIDE

No power

| AC adaptor not connected.| Connect the AC adaptor correctly.
The unit is in Standby mode.| Press the  button to turn on the unit.

No sound

| Volume in minimum.| Adjust volume to a desired level.
The connected device is not in playback mode.| Play t he music in the connected device.
Sound output of the

connected device weak.

| Adjust volume of connected device.

Sound distortion

| Volume level too high| Reduce the volume level by pressing the VOL button.
Volume level of the connected device too high.| Reduce the volume level of the connected device.
Bluetooth reception failure| Not in the Bluetooth mode.| Try to do connection again.

Warning

• The apparatus shall not be exposed to dripping or splashing place. And don’t put the objects that filled with liquids on the apparatus, such as vases.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as fire, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Do not overload wall outlets and extension cords as this can result in a risk or fire or electric shock.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may resu in fire or electric shock or other hazards.

SPECIFICATIONS

• Power source: AC 100-240V 50/60 Hz
• Radio Coverage: FM 87.5 -108.0 MHz
• Bluetooth Version: V4.2+EDR
• Bluetooth: 2.402-2.48GHz
• RF Output Power : -4.009 dBm
• Bluetooth working distance : Up to 10 meters measured in open space. (Wall and structures may affect range of device)
• Operating Time: Approx. 7 hours at 50% volume after fully charged
• Charging Time : Approx. 7 hours

Specifications are subject to change without notice.

SAFETY INSTRUCTION

• ATTENTION : To reduce the risk of electric shock, do not remove the cover or back. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel.
• The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.
• The Caution mark is located at the back of the device

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment Directive)

NEW ONE S.A.S 10, Rue de la Mission, 25480 Ecole Valentin, France

References

• MUSE Electrical – Discover our collection ! - MUSE
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>