TENETH X7-180GB Cutting Plotter Machine User Manual

TENETH X7-180GB Cutting Plotter Machine

Product Information

The Cutting Plotter is a device designed for precision cutting of various materials. It comes with a range of accessories and features to ensure accurate and efficient cutting.

Packing List

• Cutter*1
• Blade holder *1
• Blade*3
• Power adapter*1
• Scraper*1
• Power cable*1
• Warranty card*1
• Non-slip mat*1
• Cleaning cloth*1

Blade Installation

1. Press the handle to expose the blade.
2. Use the gear to adjust the length of the blade tip.
3. Fix the blade handle holder in the cutting head.
4. Insert the cutting film sheet into the blade.
5. To change the blade, press the handle and replace the old blade with a new one.

Blade Holder Installation

1. Loosen the screw by turning it counterclockwise.
2. Insert the blade holder vertically into the holder’s hole.
3. Tighten the screw by turning it clockwise.

Power On / Off

To power on the machine, connect the cable and adapter to a 110-240V AC power source. Press the power button and wait for approximately 30 seconds for the machine to start up.

Material Installation

Place the material flat on the table and align it to the left based on the feeding guide. The cutter will automatically feed the material once it detects it. If the film shifts, press the switch for 1 second to automatically return it back.

Connect Bluetooth

1. Scan the QR code or visit the provided website to download the phone cut app.
2. Install the app and allow all necessary permissions.
3. Login to the app using your account and password.
4. Choose the desired cutting data or monthly fee.
5. Select the appropriate line for internet connection.
6. Click login to access the app.
7. If you don’t have an account, you can register through the app.

WIFI Connecting

Turn on the wifi on the cutter and select a wifi network to connect to. Enter the correct password if prompted.

Login Account

After connecting to wifi, login to your account using the provided credentials. The account and password information can be found on the bottom of the cutter or obtained from your supplier.

Choose Cutting Data

Once logged in, navigate to the product page and select the desired cutting data from various categories.

Choose a Cutting Data

In the cutting data selection page, search for specific brands or browse through popular brands to find the desired cutting data.

Packing list

Product Overview

1. Cutter carriage
   Control the blade to cut the film sheet

2. Rubber wheels
   Work with steel axis to keep cutting without slip

3. Steel axis
   Work with rubber wheels to fix and protect film sheet

4. Power switch
   Turn on the machine . Press it lightly to turn back the films during stand-by

5. Blade holder
   Install the blade to cut the film sheet

6. Film feeding sensor
   Auto feeding the film after detecting it

7. Right baffle
   Used along with left baffle to keep film sheet without shift

8. Left baffle
   Used along with right baffle to keep film sheet without shift

9. High definition screen
   6 inch touch screen , built in operation system

10. Roller handle
    Press handle and the roller will put up , then the roller can be moved

Blade installation

• 11. Handle
  Press it to get the blade

• 12. Gear
  Adjust the blade tip length

• 13. Blade handle holder
  To be fixed by the hole in cutting head

• 14. Cutting Blade
  Cutting film sheet

Notes:

• Ajust the blade:
  • Twist the gear to adjust the blade tip
  • Value bigger,tip longer
  • Value smaller, tip shorter
  • Factory setting is gear 6
• Change blade:
  • Press handle take out the old blade,put a new one in it

Blade holder installation

1. loose the screw
   Turn the screw counterclockwise in 8 times

2. Insert the blade holder
   The balde holder with the cutting blade is placed vertically into the holder’s hole．

3. Fix the screw
   Turn the screw in clockwise．

Power on / off

• Connect the cable and adapter.
• 110 – 240 VAC power for the plug connection.
• The adapter connects the machine.
• Press the power button, machine power on.
• It takes 30s for starting.

Material installation

• Put the material on the table flatly and align left based on the feeding guide
• The material will be feed automatically after the cutter detect it.
  (If the film shift, press the switch in 1 second and the film will bere turned back automatically)

Connect bluetooth

Note: Suggest to scan the QR code to download APP by web browser

Please alow all access persion during installing the APP, therwise it may abnormal, detailed operation as below:

1. Login App and choose language.
2. Insert the account and password.
3. Choose count / Monethly fee.
4. Default is Line:1 , if the internet not good , please change to Line:2.
5. Click LOGIN.
6. Register(This function only for the user who without account)

WIFI Connecting

After turn on the wifi on the cutter, click and choose a wifi to connect.

Note: Conncting succeed, the wifi ID will be showed below if not, you may need insert the correct password and connect. .

Login account

After connecting wifi, choose login and insert the account and choose version, then insert your password to login the data page. Account and password may paste on the bottom of the cutter or you can get from your supplier.

Choose Cutting Data

After enter the product page and choose the data you need to cut.

Choose a cutting data

• Front film -A+ is accurate data, the front screen is wrapped to the edge of the screen; -A is slightly smaller than A+ by about 0.5mm – with cover A is the data with cover; – Frosted A is the hole data, suitable for frosted/matte materials..
• Back film -B+ is back film with full cover, -B- is back film packaging data; -B is back sticker data
• The explosion-proof film is only suitable for straight screen mobile phones, the size is similar to the tempered glass.
• Full-screen film-DA full-screen half-package data, -DB back-stick data;-DC is the whole machine full-package data

Cutting finished

The sheet will be dropped out automatically after cutting finished, please take out the  finished parts and paste on the phone.

Parameters and precautions

• Connection wifi or Bluetooth
• Internal Power DC24V 1.75A
• Screen size 6.0 inches
• machine size 594284290mm
• machine weight 8.5kg

FAQ

• Don’t touch the knife tip by finger
  The finger may be hurt by the knife tip

• Don’t seep into liquid
  This may cause fire or electric shock

• Don’t use non-original power supply
  This may damage the cricuit or electric shock

• Don’t use in thunderstorm days
  This may damage the machine

• Don’t use the non-standard materials
  Please cut the standard size of material to reach

FCC NOTE

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha tinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>