RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone User Guide

June 5, 2024
RIPPTON

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig1

Download the Rippton App
Search for “Rippton” on the Google Play Store, Samsung Galaxy Apps or App Store to install the app on your mobile device or scan this QR code.

Notice this manual is for the SharkX but also applicable to the SharkX Plus and the SharkX Pro. The SharkX is the basic model while the Plus and the Pro are upgraded versions so they include additional functions and features. Therefore, all the charts and graphics in this manual are just for a general reference and should be subject to actual applications and updates.

SHARKX
SHARKX is a professional smart fishing drone, which is capable of lifting up to 3 KG baits over the water where you go fishing. Together with the use of the ‘RIPPTON’ App, SHARKX can fly to any fishing spots within a distance of 1 KM away from the home point by tapping the GPS map on the ‘Rippton’ app, and all mission spots will be saved automatically after the missions have been completed.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig3

Remote Control
The remote control allows users to fly the SHARKX to as far as 1 KM, with the buttons and dials for power on/off, hook releasing and return to the home point.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig4

Controls
Using remote control joysticks for vertical and horizontal flying, and locking and unlocking the drone.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig5

Using remote control to open and close the hook release mechanism

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig6

  1. Press the ‘Hook Release” button on the remote control to open the hook release mechanism.
  2. Put the fishing line in the device.
  3. Press the ‘Hook Release” button on the remote control to close the hook release mechanism.

Setup of SHARKX

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig7

  1. Insert the battery into the compartment
  2. Connect and fasten the wire connectors
  3. Close the compartment cover
  4. Lock the cover by twisting the rotary switches

CCW Props ,CW Props

CW Propeller installation , CCW Propeller installation

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig9

Preparation of the Controller
Notice: for optimal range the sides controller antenna need to face the drone while it is in flight, and NOT point at the drone

  1. Tilt the antennas up.
  2. Fasten your mobile device securely to the clamp.

Preloading the Map on the App

When using the SHARKX in any new areas, it’s always necessary to enter the ‘Rippton’ app with network connection and finish preloading the map before connecting the SHARKX to your mobile device.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig12

Connect the SharkX Controller to Your Mobile Device

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig27

Notice

  • there is a voice prompt indicating SharkX connected successfully
  • before launching SharkX, please make sure the satellite number is no less than 15, otherwise the drone will not take off successfully
  • please do the calibration every time when you come to a new place, according to Section 4.5 of the User Manual

Rippton App Function

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig17

Annotation of Different Spots on App

Charge the Drone Battery

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig28

Charge the Remote Control

It normally takes approx. 3.5 hours to fully charge the remote control.
Notice regularly charge both the drone battery and remote control every two months to avoid the over-discharging, which may cause the batteries not to charge.

For more details about SHARKX Preface, Description of the Product, Preparation and Installation, Operation/Use, Maintenance, Troubleshooting and Repair, Disposal information etc., please refer to the User Manual.

To watch the video of installation, app operation process, compass & IMU calibration, please scan the QR code below

For more information about Rippton, please scan the QR code below

Useful Tips:

  1. How to use the RC to take over when the drone is controlled via the App?
    Two ALTERNATIVE ways:

    • tap the “Take-over” icon on the flying control interface; OR
    • toggle the lever to ‘Alt Hold’ and then back to ‘Pos Hold’ on the remote control.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig24

  1. How to interrupt the ongoing automatic mission execution and start a new mission?
    Two ALTERNATIVE ways:

    • tap the ‘Mission Selection’ icon on the flying control interface; OR
    • toggle the lever to ‘Alt Hold’ and then back to ‘Pos Hold’ on the remote control.

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig25

  * Notice it’s recommended not to tap any icon on the interface during the automatic mission execution unless you decide to start a new mission.  

Start a new mission:

  * tap ‘Mission Selection’ to a start a new mission;
  * slide to start.

Safety Notice
It’s recommended to always keep the SHARKX within your visual range. Do not pull the fishing line if it got snagged with the drone. It may break the drone’s balance.

Specifications

SHARKX Drone

RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone-
fig29

Documents / Resources

| RIPPTON 20220609 SharkX Waterproof Smart Fishing Drone [pdf] User Guide
20220609, SharkX Waterproof Smart Fishing Drone, 20220609 SharkX Waterproof Smart Fishing Drone
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RIPPTON User Manuals

Related Manuals