tuya App For Smart Bluetooth Padlock User Guide
- August 27, 2024
- Tuya
Table of Contents
tuya App For Smart Bluetooth Padlock User Guide
Products specifications
| Unlock method | Password unlock, app unlock |
|---|
Password
combination
| 1-9 Digital key button
Password length| A 6-digit password
Number of Password| 200 pcs
Battery type| CR2032
Battery life| 12months
Product material| Zinc alloy
Product size| 764622 mm
Waterproof ability| IP67
Working temperature| -20 ～ 55℃
Dear users，
Thank you for choosing a smart Password padlock. In order for you to have a
better use experience, please read the instructions carefully before
experiencing the product. When you get the product, pull off the plastic film
on the back of the product and power the product to work.
The factory default password of this product is ①②③④⑤⑥，
Enter the password will automatically unlock the lock .
Blue light comes on after pressing the number. If the password is incorrect ,
the red light will light up for one second ; If the password is correct，the
green light will light up for one second and unlock .
Intelligent use
- Download Tuya
Download website
Connect Bluetooth
Press the random number for about 3 seconds, and the blue light is on.
①Open the app, click “+” in the upper right corner, and then click “Add
Device”.
②Click “Add” to connect the device.
③Click “Done” after adding P02-PADLock.
Bluetooth unlock
Slide the lock sign from left to right to unlock the lock.
Add users
①Click on the “Member Management”.
Click “me” to enter the add interface.
Click “Add” to add more users.
Add a password, set a 6-digit password and click “Save”, then the user is added successfully.
Delete the users
①Click on the user name that you want to delete.
Click on the Delete Code.
Click on OK.
The list was successfully deleted successfully .
(When the device is connected to Bluetooth, if the user deletes them all, the
device will resume the factory setting!） Abnormal treatment method
When there is any abnormality in the product, please try to open the lock
several times. If not, please replace the new button battery before trying to
open the lock.
Factory data reset
Operation mode : long press the number key “9” to keep the blue light for about 6 seconds , flashing the red light , entering the password at the same time , keep flashing the red light and operating again ; if the password is entered correctly , the light is changed by green-yellow-green , the password is cleared , and the equipment shall restore the factory setting .
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>