jlrgear PD-15 10000mAh Magnetic Wireless Battery Pack Instruction Manual

jlrgear PD-15 10000mAh Magnetic Wireless Battery Pack

Product Information

Specifications

• Dimensions: 68mm x 14mm x 102mm
• FCC Compliance: Part 15 of the FCC Rules
• RF Exposure: General RF exposure requirements met
• Usage: Portable exposure condition without restriction

Product Usage Instructions

The device complies with Part 15 of the FCC Rules. To maintain compliance and ensure proper operation:

• Avoid making changes or modifications not approved by the responsible party.
• Do not operate the device in a way that causes harmful interference to other devices.
• Ensure the device can accept any interference it receives to prevent undesired operation.
• The device has been evaluated to meet general RF exposure requirements. To use the device in portable exposure conditions:
• Operate the device within the specified dimensions.
• Avoid using the device in areas where RF exposure is restricted.

FAQ

• Q: What should I do if the device is not operating correctly?
• A: If you experience issues with device operation, first ensure that you are complying with FCC regulations and RF exposure requirements. Check for any unauthorized modifications and interference sources.
• Q: Can I use the device in any location?
• A: The device can be used in portable exposure conditions without restriction, but it is important to avoid areas with specific RF exposure limitations.

Overview

Dimension

Instruction for use

1. There are 2 ways to charge your device, connect PD-15 Power to your device through

   • A. The USB-C PD port
   • B. Wireless charging
     Note: To charge small devices like Bluetooth earbuds, and fitness tracker. Put the device in the PD-15 wireless charge area, it will naturally charge the device.

2. To Recharge your PD-15, connect the USB-C port to a power adapter.
   The LED will filcker in white progressively.
   Indication charging is in progress. All LEDs will be ON in white when charging is completed. Unplug PD-15 from the power supply.

SPECIFICATION

• MODEL: PD-15
• Capacity: 10000mAh
• Rated Capacity: 5600mAh
• Input: 5V 3A,9V 2A(USB-C)
• Output: 5V 2.4A,9V 2.22A, 12V 1.5A (USB-C PD)
• Wireless Output: 5W, 7.5W, 10W
• Materials: Aluminum + ABS
• Size: 10268 14mm
• Weight: 188g

CONTAINS

1. Magnetic Wireless Battery Pack 10000mAh
2. USB-A to USB-C charging cable (30cm)
3. Instruction manual

DISPOSAL OF ELECTRONIC PRODUCTS

1. Do not place the product as household waste;
2. Please dispose of discarded electronic products properly according to local regulations;
3. Encourages you to participate in an electronics recycling program.

WARNING

1. Do not dismantle or modify the products;
2. Do not store the product in wet conditions;
3. Do not keep or use the product near heat sources;
4. Do not let water or any other liquid flow into the inside part of the product’s interface. This would cause damage to the product.
5. Stop charging or using the product in case of battery expansion.
6. Make sure to remove metallic, magnetic protective cases or chip cards like bank cards. Etc from your device when charging.
7. While charging, the charger may heat up. This is normal and should not affect the charger’s performance. If the charger feels hot to the touch during this charging process, remove the device from the charger and allow it to cool down before restarting the charging process;
8. Avoid using bent or damaged USB cables.

WARRANTY CONDITIONS

1. We are responsible for 12 months quality guarantee;
2. A valid warranty card and original purchase invoice must be presented upon request of warranty service;
3. This warranty card shall not apply to the products if:
   • (A)it has explicitly modified or repaired in any way by personas other than technicians of this company or;
   • (B)it has been damaged through misuse, malicious acts, negligence, the inflow of any liquid, or;
   • (C)losses or damages are caused by force majeure or natural disasters.
4. No alteration to this use guide will be allowed;
5. The warranty terms and conditions are subject to change without prior notice;
6. Please consult the dealer about the product compatibility with your cell phone/PDA before purchase. Product specifications are subject to change without prior notice.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>