jlrgear DT-6816-KB LED Laser Light Galaxy Speaker Instruction Manual

jlrgear DT-6816-KB LED Laser Light Galaxy Speaker Instruction Manual

Product Information

The product is designed to comply with FCC RF exposure requirements. It has an antenna that emits radio frequency (RF) signals during operation. To ensure safety and compliance, it is important to maintain a separation distance of 20cm or more between the antenna of the device and any person.

Product Usage Instructions

When using the product, it is essential to follow the recommended guidelines for maintaining a safe separation distance:

1. 1. Ensure that the device is placed or held at least 20cm away from any person during operation.

2. Avoid direct contact with the device’s antenna while it is in use.

3. 1. Do not position the device in a way that would cause the antenna to be in close proximity to any person, especially sensitive areas such as the head or body.

4. Keep in mind that maintaining the recommended separation distance is crucial for complying with FCC RF exposure requirements and ensuring the safety of both the user and others nearby.

5. If it is necessary for someone to be in close proximity to the device during operation, it is advised to limit the duration of exposure and maintain the maximum possible distance between the person and the device’s antenna.

NOTE : Please note that operations closer than the recommended separation distance may not comply with FCC RF exposure requirements and are therefore not recommended. For any further information or clarification, refer to the product’s user manual or contact our customer support.

INSTALLATION

Specifications

• Power Input : USB DC 5V, 2A
• Speaker Output:  4 Ohms, 5 Watts
• Wireless:  Bluetooth® 4.0
• Power Cord : 5FT USB-A to USB-C
• LED Nebula:  RGBW LEDs
• Diode Laser:  Max Output ;,, 15mW – Wavelength 532nm

NOTE : LED laser projects an intense green star grid onto wall and ceiling. Position the LED laser side of the housing against a wall to help ensure you don’t accidentally stare at direct or reflected beams. Exposure to beam can cause eye injury. Avoid reflected beams from glass and shiny surfaces.

Choosing Safe Location

1. Select a level location near a wall with clear line of sight upwards to the ceiling that is also away from glass or shiny surfaces.
2. Position the laser light against the wall with the controls facing outward.
3. If possible, locate above eye level or in the corner of a room for added safety.
4. Never shine LED laser in eyes or out a window towards a street, moving vehicle or aircraft.
5. LED lighting effects work best in darker spaces and low light conditions.
6. Toggle dimmer wheel to low light output during setup to avoid accidental exposure.

HOW TO USE

Operating Instructions

1. Plug USS power cord into speaker (Fig A).
2. Connect to a USB power source rated 2 amps of greater. Power source not included (Fig B).
3. Locate battery compartment on the back of the remote control. Install 2 AAA batteries in the proper orientation (batteries not included).
4. Locate power switch on the speaker and power on.
5. Locate Laser button on remote or speaker and turn on LED laser to project a green star grid (Fig C).
6. Locate LED button on remote or speaker and turn on the multicolor nebula wave light.
7. Red, green, blue and white LED nebula wave has 3 levels of brightness and motion. Combine two LED lights for more colors.
8. Toggle the dimmer wheel on speaker to increase/decrease light output (Fig D).

Connecting Speaker and Playing Music

1. Open Sluetooth® settings on smartphone and connect to BTK10.
2. Play music using your favorite App and control speaker volume with your phone.
3. Speaker has onboard controls for play, pause, selecting tracks and volume.
4. Connect directly to the speaker using the USS input port.
5. Press microphone button on the remote control to make the lights sound reactive and move to the music.

Using the Remote control
For best results, point remote control at remote sensor on the Galaxy Speaker. for

• Press LED the nebula, power laser button Nebula Light On/Off
• turn light the and / or feature on speaker or to off
• Press green, any blue 2 of and the white red, light more LED buttons nebula at once colors for wave
• Control motion nebula by light pressing 5-S+ to to decrease increase speed speed
• Press the laser green light stars button stay to on and out constantly or fade in
• Press mode button microphone to make music and lights move sound to the reactive music
• Use audio controls on remote to play, pause, select tracks and adjust volume once your device is paired and streaming music
• LED nebula, laser light and speaker can all be powered on/off separately to use features independently

Care Instructions

1. Power off and unplug the speaker.
2. Wipe clean or dust with a soft cloth.
3. Dampen cloth as needed.
4. Do not get the housing wet.
5. 6. Allow to air dry completely prior to use.

WARNING! IMPORTANT CARE AND SAFEGUARDS
Failure to follow the safety instructions can lead to fire, electrical shock, personal injury or property damage and damage to this product.

• Do not use galaxy speaker for anything other than its intended use
• Keep away from children. This is not a toy. Children should not be permitted to use Class 3B lasers
• Any teenager using a Class 3B laser should be continuously supervised by a responsible adult
• Do not use near babies, children or individuals with certain disabilities
• Always be aware of beam location. Keep away from heads and eyes
• Watch out for reflected beams from glass and shiny surfaces
• Never point any laser toward an aircraft, vehicle in motion, towards a street or out a window
• Never use a Class 3B laser as a laser pointer
• Do not get wet or expose this product to rain, water or excessive humidity
• Keep away from extreme heat sources and intense sunlight
• Always use this product in operating temperatures of 32°F (0°C) – 95°F (35°C)
• Keep surface free of dust and dirt, clean periodically
• Never take this device apart or attempt to repair yourself
• • • • • Never shine LED light in anyone’s eyes
• Eye injury can result from exposure to beam or improper use

WARNING:

• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium batteries.
• DO NOT dispose of batteries in fire. Batteries may explode or leak. Please dispose of batteries properly)

CAUTION!  KEEP AWAY FROM CHILDREN. THIS IS NOT A TOY!

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. FCC Disclaimer: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFI- CATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
 Any questions, please call customer service at 1-800-254-0111">800-254-0111 8:30 am – 5 pm, PST. Monday – Friday, or email us at customerservice@jIrgear.com 2434 Research Dr., Livermore, CA 94550 © 2023 JLR Gear – Made in China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>