PARKSIDE IAN440109_2304 Hose Cart Instruction Manual
- August 23, 2024
- PARKSIDE
Table of Contents
PARKSIDE IAN440109_2304 Hose Cart
Product Information
Specifications
- Intended Use: Residential
- Max. Hose Length: 60m
- Max. Hose Diameter: 35m
- UV Resistant
- Weather Resistant
Product Usage Instructions
Assembly
Attach the quick-release connector of your hose to the external end of the hose coupling [15]. Connect the other end of the hose to the angle hose coupling [14].
Rotate the hand crank [12] clockwise to roll up the hose. To unroll, pull on the hose gently.
After Use
Turn off the water supply and disconnect the hose coupling [15] from your hose connector.
Maintenance, Cleaning, and Care
Use a slightly moist, fluff-free cloth to clean the product.
Storage
Disconnect the hose coupling [15] from your hose connector. To save space, loosen the union nuts [6] and retract the front stand [4] and handle [5].
Disposal
The packaging is recyclable. Contact local recycling facilities for disposal information.
FAQ
Q: Can I use this product for commercial purposes?
A: No, the product is intended for residential use only.
Q: Is the product suitable for delivering drinking water?
A: No, the product is not suitable for delivering drinking water.
Q: How do I roll up the hose on the hose cart?
A: Rotate the hand crank clockwise to roll up the hose. Pull on the hose gently to unroll it.
SYMBOLS
- Before using for the first time, read the instruction carefully.
- This signal word indicates a hazard with a high degree of risk which, if not prevented, could lead to death or serious injury.
- This signal word indicates a hazard with a low degree of risk which, if not prevented, may result in minor or moderate injury.
- This symbol indicates that the product is UV resistant.
- This symbol indicates that the product is weather resistant.
HOSE CART
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high quality product. Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer to the operating
instructions and the safety advice below. Only use the product as instructed
and only for the indicated field of application. Keep these instructions in a
safe place. If you pass the product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The product is not intended for commercial use.
The product can hold a hose with following measurements:
Length (max.) & Diameter
60 m 13 mm (½”)
35 m 19 mm (¾”)
Safety advice
- Make yourself familiar with all the operating instructions and safety advice for the product before installation. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.
- CAUTION! DANGER OF INJURY! KEEP THE PRODUCT OUT OF THE HANDS OF CHILDREN. THIS PRODUCT IS NOT A TOY! This product must not be used by children.
- DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN!
- Never leave children unsupervised with the packaging materials. Danger of suffocation. Keep out of the reach of children. CAUTION! RISK OF INJURY! Ensure that all parts are undamaged and have been assembled appropriately. Risk of injury exists if assembled incorrectly. Damaged parts can effect safety and function.
- Have the installation done by experienced persons only. Never block the hose end with your fingers or other objects during use.
- To avoid frost damage, store the hose trolley dry during winter.
- CAUTION! DANGER OF SLIPPING! Ensure that the ground near the hose trolley is kept as dry as possible. Turn the tap into the off position when the hose trolley is not in use.
- Do not direct the water jet towards electrical equipment!Do not direct the water jet towards persons or animals!
- The product is not suitable for delivering drinking water.
Assembly
- See Fig. A – H
- Loosen the union nuts [6] to extend or retract the front stand [4] and the handle [5] to the desired length.
Using the hose trolley
- Attach the quick-release connector of your already on the water tap pre-mounted hose to the external end of the hose coupling [15]. The hose trolley is now connected to the tap.
- Now connect the other length of the hose (to be wound on to the drum) to the inner end of the angle hose coupling [14].
- Rotate the hand crank [12] clockwise to roll up the hose. Pull on the hose to unroll it.
- To unroll, pull slowly on the hose.
After use
- Turn off the water supply.
- Disconnect the hose coupling [15] from your hose connector.
Maintenance, cleaning and care
Clean the product using a slightly moist, fluff‑free cloth.
Storage
See Fig. I
Disconnect the hose coupling [15] from your hose connector.
To save space: Loosen the union nuts [6] and retract the front stand [4] and
the handle [5].
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
The product and packaging materials are recyclable and are subject to extended
producer responsibility.
Dispose them separately, following the illustrated Info-tri (sorting
information), for better waste treatment.
The Triman logo is valid in France only.
Warranty
- The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
- The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.
- Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.
- Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.
- This warranty becomes void if the product has been damaged, or used or maintained improperly.
- The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.
Warranty claim procedure
To ensure quick processing of your claim, observe the following instructions:
Make sure to have the original sales receipt and the item number (IAN
440109_2304) available as proof of purchase.
You can find the item number on the rating plate, an engraving on the product,
on the front page of the instruction manual (bottom left), or as a sticker on
the rear or bottom of the product.
If functional or other defects occur, contact the service department listed
below either by telephone or by e-mail. Once the product has been recorded as
defective you can return it free of charge to the service address that will be
provided to you. Ensure to enclose the proof of purchase (sales receipt) and a
short, written description outlining the details of the defect and when it
occurred.
Service
Service Great Britain
Tel.: 0800 0569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>