ZEALOT S31 Wireless Speaker User Guide
- September 18, 2024
- ZEALOT
Table of Contents
S31 Wireless Speaker
“`html
Specifications
- Wireless version: V5.2
- Charging voltage: DC 5V
- Working voltage: 3.7V
- Transmission distance: 10m
- Frequency range: 100Hz-20KHz
- Speaker: 4*2
- SNR: 85dB
- Distortion: 1%
- Weight: 330g
- Size: 1806056mm
Product Usage Instructions
Power On/Off and Charging
To power on the ZEALOT-S31 wireless speaker, slide the ON/OFF
switch to the ON position. To power off, slide it to the OFF
position. Charge the speaker using the provided micro USB cable and
a power adapter with a charging voltage of DC 5V.
Wireless Connection
-
Turn on the ZEALOT-S31 speaker by sliding the ON/OFF switch to
ON. -
Enable Bluetooth on your device and search for available
devices. Select “ZEALOT-S31” to pair. -
Once connected, the LED indicator on the speaker will flash or
light up depending on the mode.
Mode Switch
The speaker features a mode switch for toggling between
different modes. Refer to the user manual for specific instructions
on switching modes.
FAQ
Q: What should I do if the speaker is not connecting via
Bluetooth?
A: Make sure the speaker is in pairing mode (LED indicator
flashing) and that your device’s Bluetooth is turned on. You may
need to reset the Bluetooth connection on both the speaker and your
device.
Q: How long does the battery last on a full charge?
A: The battery life of the ZEALOT-S31 speaker depends on usage,
but on average, it can last up to 8 hours on a full charge.
“`
ZEALOT-S31
WIRELESS SPEAKER
QUICK START GUIDE
PACKING CONTENT
PLAY
PARTYADD
X1 >2
X1 >2
Calling
X1
/
X1
/
Micro USB
POWER ON
ZEALOT-S31
WIRELESS SPEAKER QUICK START GUIDE
2
ON/OFF
CHARGE
X2
ON
OFF
USB
WIRELESS CONNECTION
1
ON
Devices ZEALOT-S31
ON
Devices ZEALOT-S31
Flashing
2
ON
Devices ZEALOT-S31
Lighting
MODE SWITCH
2
WIRELESS
CCC If consumers use a power adapter to charge, they should purchase a
matching
set of CCC certification and meet the standards Required power adapter.
S31-20240329
WARNING
EN
To ensure correct use and trouble-free operation, please read this user manual carefully first. For the first use, it is recommended to fully charge it. Please use and store the product at room temperature. Do not expose the product to fire, high temperature, direct sunlight, etc. Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment. Do not use organic solvents or other chemicals to clean the product. Do not let small particles enter the product. Do not disassemble the product or make any modifications to the product structure or any part thereof. If the battery is not replaced correctly, there will be an explosion accident, only the same battery type can be replaced. The battery (battery pack) must not be exposed to such sunlight, fire or similar overheating conditions. Do not throw and drop the product to avoid damage.
Technical Specification
EN
Wireless version V5. 2 Charging voltage:DC 5V Working voltage:3.7V
Transmission distance:10m Frequency range:100Hz-20KHz Speaker:42 SNR:85dB
Distortion:1% Weight: 330g Size:18060*56mm