KOFIRE UT-01 Wireless Gaming Headset User Manual

UT – 01
USER MANUAL

LED Indicator Light Description

playing
Standby Mode| Blue LED stays on indefinitely
Low Battery Status| Green LED flashes 3 times per second
Vibration on| The white LED light is on when the vibration switch is turned on The white LED is off when the vibration switch is off
Charging Status| Red LED stays on while in charging, red LED goes out while fully charged

Basic Key Operation

Turn On
Long press to turn on the headphone, It Is turned on after the blue LED stays on for 2 seconds. The headset enters palring status.
Turn Off
Long press to turn off the headphone, the blue and green LED stays on for 2 seconds, then goes out.

Volume Adjustment
Short press and to control volume.
Music Selection
Long press to skip to the next song.

Long press to skip to the previous song.

Play/Pause/Phone call Music Pause: Short press when in music playing. Music Play:
Short press when in music pause.
Answer Calls: Short press when a call coming in.
Hang Up: Short press when on a call.
Refuse to Answer: Long press when a call coming in.
When Wireless is connected, double press re-dial the last phone number in your call record.
Headphone Turn On Status
Long press , the headphone turns on, then the blue and green LED twinkle alternately, and the headphone enters pairing status. Turn on the Wireless in your cell phone and search for “UT-01”, click to connect. The blue LED will stay on indefinitely after successfully connected. The blue LED will flash slowly when music is playing. *Note: The function of the decorative LED light of the headset is automatically turned on after the power is turned on, and it can be turned off by the combination of buttons.
Vibration function switch
In the power-on state, toggle the vibration switch down. At this time, the vibration function of the earphone is tamed on (the white LED is always on), and the earphone will vibrate with the low frequency of the playing music. The stronger the bass, the stronger the vibration. Toggle the vibration switch up to tam Off the vibration function (the white LED goes out). At this time, you can listen to music, play games, etc., but the vibrating speaker will not work while the music speaker will work normally.
Breathing flashing decorative LED light switch*
After the headset Is tuned on normally, the decorative LED light starts automatically. If you need to save power or turn it off for other reasons, short press the volume up and volume down at the same time, the decorative LED light will turn off. and you Can turn it back on after turning it off. Note: When charging or using as a wired headset, the decorative light does not work
Boom Microphone
The headphone is equipped with a long boom microphone for a better call experience. During a call, if you want to talk to others or you don’t want to be heard by the person on the other end of the phone, short press the mute button on the boom microphone to stop the microphone from working. When mute Is turned on, the headset will prompt “didi” and when you need to resume the call, short press the mute button of the boom microphone again to resume the call.
Auto off and Long—distance Reconnect**
The headphone will be disconnected automatically when out of the effective range. When back to effective range within 5 minutes, it will auto-connect with your phone. The headphone will turn off automatically if out of the effective range over 10 minutes.

Headphone Overview

Charging Mode
When in a low battery, please charge it for around 3.5 hours with USB charging cable. The headphone will turn off automatically while charging. Red LED stays on indefinitely while in charging, and red LEO goes out while fully charged.
Power Status
When the headphone is connected to the 106 device, the current power status of the headphone will be showed on the upper right corner of the device screen. When the battery Is low, It will prompt *battery low”.
Line—in Mode
Plug in the audio cable, the headphone will automatically turn off, and you can listen to music on the audio cable. Th built-in microphone and the boom microphone can be used via the audio cable. The vibration funetiOn can also be on or off by the vibration switch. *Note: In line-in mode, the headphone can’t be turned on. If you want to use Wireless, you need to unplug the audio cable and turn the headphone on.
Wireless Transmitter LED Indicator Description

For the First Time Using

1. Insert the Wireless transmitter into the USB-C port of the device(USB-C mobile phone, PC, laptop, TV with USB interface, MAC, PS4, PS4 Pm, PS5, Nintendo, Switch (TV mode), the device will automatically install the driver, the name displayed on the computer device is: UT-01. and defaults the device as audio transmission, the transmitter enters pairing state with the blue LED flashing quickly.
2. The Wireless transmitter is successfully connected with the Wireless device, and the blue LED will stay an indefinitely.

Connect Transmitter and Nintendo Game Console
Insert the transmitter into the USB-C port of the Nintendo Switch, the transmitter enters pairing status, turn on the headphones and connect the transmitter, the Nintendo Switch automatically sets the transmitter as default audio transmission; it supports game calls and audio playback.
Connect Transmitter and Nintendo TV
The transmitter can be connected to Nintendo TV through a USB adapter.
For the Second Time and Subsequent Using
When there is pairing information of the headphones on the device, for the second time using, the Wireless transmitter will automatically connect back to the Wireless device.
Connect Transmitter and Headphones
When the headphone is connected with the phone, the transmitter will not connect headphones. After the headphone disconnects your phone, re-plug the transmitter once, or long press the round ring button of the transmitter for 3 seconds, then the transmitter will enter the pairing mode with headphones.
Power On/Power Off
Insert the Wireless transmitter into the USG port of the computer and it will automatically turn on./Unplug the Wireless transmitter.
Wireless Connection
Long press the round ring button for 3 seconds, the Wireless transmitter enters pairing status with the blue LED fleshing quickly. Now it supports listening to music, Wireless video playback, Wireless video calls, etc.
Wireless Disconnection
In the connected state, short press the round dot button, and the red LED stays on Indefinitely.
Reset
In any state, long press the transmitter ring button for 8 seconds, the blue and red light will stay on for 1 second
Transmitter supports connected devices
USB-C mobile phone. PC. laptop, TV with VS8 interface. MAC, PS4, PS4 Pro, PS5, Nintendo, Switch (TV mode), etc.
USB to USB—C adapter
In order to adapt to the USB-A interface device, the transmitter can be used plus an adapter.

Wireless Transmitter Parameters Information

Warm Tips

1. Please charge the headphone with 5V 1 A / 5V 2A charger, high voltage may damage the headphone.
2. When the headphone has not been used for more than 3 months, it needs to be charged before use.
3. When the headphone has not been used for a long time, we suggest you charge every 3 months to provide good protection for the battery.
4. We suggest you fully charge the headphone for the first time use.

Attentions

1. Please keep or use the headphone at normal temperature, avoid direct sunlight.
2. Please keep the headphone away from fire or other hot objects.
3. Please keep the headphone away from damp places or submerged in liquid, keep dry
4. Please don’t try to use other methods of charging other than the USB charging cable we provide.
5. Please don’t disassemble, repair, or modify.
6. Please pay attention to excessive clash, if any damage (like dents, deformation, corrosion, etc.), please turn to us for assistance by the contact information on the warranty card.
7. If the headphone produces an abnormal smell, higher than normal temperature, color, or shape changes abnormally, please stop using and turn to us for assistance by the contact information on the warranty card.

Warning Prolonged use of headphones at high volume may cause damage to your hearing.

Warranty Description

Please keep the warranty card and valid purchase proof properly, show it together when sending the product to repair. If you can’t provide the warranty card or relevant purchase certificate, the calculation date of the product warranty will be based on the product manufacture date.
Warranty Regulations

1. If you have any questions during using, please don’t hesitate to call 4008894883 for help.

2. Within one year from the purchase date, if the product with quality issue and the technical staff of our company has confirmed that the issue occurs under normal use, we will provide free replacement services.

3. In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
   A. The product main part has been damaged due to incorrect operation, negligent use or irresistible reasons
   B. The product has been dismantled or repaired without our company authorization
   C. The headphone driver unit has been used at high volume, and the diaphragm is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
   D. The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period.

4. The free service provided by this warranty card does not include product accessories, and other decorations, gift, etc.

Product Qualification Certificate
After inspection, the product meets the technical standards and is allowed to leave the factory.
QC 0.8
PASS  

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>