DASAN ELECTRON DWD-1000 Wireless Dect Usb Dongle User Manual

DASAN ELECTRON DWD-1000 Wireless Dect Usb Dongle

Product Information

Specifications:

• Model Name: DWD-1000
• Manufacturer: DASAN ELECTRON CO,. LTD.
• Button & LEDs: LED Colors – Green, Red, Blue, Purple
• USB C-Type

Product Usage Instructions

Registration Process:

1. Connect the USB Dongle to your PC.
2. Press the Base center button for 3 seconds.
3. If the Base Blue LED blinks, it is in Pairing mode.
4. Press the Headset mute button for 3 seconds until the blue LED blinks, indicating Pairing mode.
5. Once pairing is completed, the Base LED will change to Green, and the Headset LED will turn off.

Call Function:

1. Hook Off: Press the Hook button on your DECT headset to light up the Blue LED.
2. Mute On: Press the button during a call to light up the Red LED. Press again to turn off Mute and light up the Blue LED.

LED Operation – DWD-1000 Status:

FAQ (Frequently Asked Questions)

• Q: How do I know if the pairing process is successful?
  A: Once pairing is completed, the Base LED will change to Green and the Headset LED will turn off.

• Q: How can I mute a call using the DECT headset?
  A: During a call, press the button on the headset to activate Mute (Red LED will light up). Press again to deactivate Mute (Blue LED will light up).

• Q: What does a Purple LED indicate on the device?
  A: A Purple LED indicates that Microsoft Teams is active on the device.

PARTS

Registration Process

1. Connect to PC.
2. Press the Base center button for 3 seconds,
3. Base Blue LED is blinking => Pairing mode
4. Press the Headset mute button for 3 seconds, then the blue LED is blinking => Paring mode

If paring is completed, the base LED is changed to Green, and the Headset LED is turned off.

Call Function

1. Hook Off: Press the Hook button on your DECT headset and a Blue LED will light up.
2. Mute On: Press the button during call status and the Red LED will light up.
   (Mute Off: Press the button again and the Blue LED will light up.)

LED Operation

FCC Rules

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The SAR was tested for the device in the body-worn mode. And it can meet the SAR limit of the FCC.

Warranty Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>