SFA NOT500 Saniflush Toilet with Built In Macerator Pump Installation Guide
- June 7, 2024
- SFA
Table of Contents
SFA NOT500 Saniflush Toilet with Built In Macerator Pump
Specifications:
- Brand: Saniflush
- Model: K70
- Power Supply: 220-240 V, 50-60 Hz
- Power Consumption: 400 W, 1.9A
- Weight: 5.4 Kg
- IP Rating: IP44
- Compliance: EN 12050-3
Product Usage Instructions
Installation:
- Refer to the installation diagram and ensure all components are present.
- Before final connection, drain off to clear any debris.
- Follow the step-by-step assembly process indicated in the manual.
- Ensure proper electrical connection as per the provided specifications.
- Perform a test run to check for any leaks or malfunctions.
Operation :
- Ensure the power supply matches the required specifications.
- Turn on the device using the designated power switch.
- Monitor the operation for any unusual sounds or vibrations.
- Regularly check and clean the device to maintain optimal performance.
Maintenance :
- Refer to the maintenance section in the manual for specific instructions.
- Regularly inspect and clean the unit to prevent blockages.
- Replace any worn-out components as necessary.
- Keep the product away from water and moisture to avoid damage.
FAQ :
-
Q: What should I do if the device does not turn on?
A: Check the power supply and ensure all connections are secure. If the issue persists, contact customer service. -
Q: How often should I clean the product?
A: It is recommended to clean the product at least once a month to maintain optimal performance.
DIMENSIONS
INSTALLATION INSTRUCTIONS
TOOLS
SAFETY
OVERVEIW
Saniflush
- K70 220-240 V – 50-60 Hz – 400 W – IP44 – 1,9A
- (class 1) – 5,4 Kg
- EN 12050-3
SERVICE HELPLINES
- United Kingdom
- Tel. 08457 650011 (Call from a land line)
- Fax. 020 8842 1671
- Service information : www.sfa.biz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>