GENERATION LIGHTING 8608901-12 Tybee Outdoor Wall Lantern Sconce Instruction Manual
- October 30, 2023
- GENERATION LIGHTING
Table of Contents
OUTDOOR
Installation Instructions for
Tybee Wall
TYBEE_OD_WALL
1.0
8508901, 8608901, 8708901, 8808901
8608901-12 Tybee Outdoor Wall Lantern Sconce
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for wet locations.
This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of
the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting studs and secure it in place with the cap nuts.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Install the shade to the fixture and secure it in place using the shade screws.
- Caulk around the base of the fixture with waterproof construction sealant.
©2023 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co.
Visual Comfort & Co. reserves the right to change specifications for product
improvements without notification.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
VISUAL COMFORT & CO.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>