nordlux BOB TO-GO Solar LED Table Lamp Instruction Manual
- June 9, 2024
- nordlux
Table of Contents
nordlux BOB TO-GO Solar LED Table Lamp
Mounting instruction
Twist clockwise to loosen. Anticlockwise to tighten.
USB charging: 4 hours – 100% charged Solar charging: 10 hours – 100% charged Light time: 4,5 hours when 100% charged
Turn on to activate the lamp. The lamp only can be charged when light off. Remember to turn it off when not in use.
Light is automatically turned of during daytime.
Light up automatically during night time. Or when brightness is less than 15 LUX.
Want to turn your new table lamp into a foor lamp? You can add a tripod to your lamp.
Twist clockwise to loosen
Vacuum Pad stickon Solar panel
Pull out the light set wiht vacuum pad
IP6X: Dust is prevented from entering the lamp.
IPX5: Water splashes from
any angle directed towards the lamp will not affect the function/safety of the
lamp.
Class III: The lamp is only suitable for 5V, 1A.
The mounting instruction must
not be discarded.
Disposal of waste equipment by
users in private households in the European Union. This symbol indicates that
this product including batteries must not be disposed of with your other
household waste.
Batteries, electrical and electronic equipment contain substances which may
cause damage to human health and environment if not recycled correctly. It is
your responsibility to hand over to a designated collection point for
recycling of waste batteries, electrical and electronic equipment. When
handing over for correct recycling you help to prevent these products
straining nature and environment unnecessarily and to protect human health.
For more information regarding correct disposal, please contact your local
city office, your household waste disposal service or the store where you
purchased this product.
CUSTOMER SUPPORT
www.nordlux.com
Nordlux A/S · 0stre Havnegade 34 · DK-9OOO Aalborg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>