CONRAD 3015655 LED Bottle Top Light Instruction Manual

August 20, 2024
CONRAD

CONRAD 3015655 LED Bottle Top Light

Product Information

Specifications:

  • Product Name: LED Bottle Top Light
  • Item Number: 3015655
  • Protection Class: III
  • Ingress Protection Rating: IP54
  • Features: Rechargeable battery, stepless dimming, touch panel control

Product Usage Instructions

Intended Use:
The LED lamp with a silicone stopper fits most bottle necks. It is suitable for creating ambient lighting and can be used indoors or outdoors.

Safety Instructions:

  • Keep the product out of reach of children and pets.
  • Do not leave packaging materials around as they may pose a hazard.
  • Handle the product carefully to avoid damage.
  • Do not place the product under mechanical stress or in extreme environmental conditions.

Operating Instructions:

  1. Insert the silicone stopper of the LED lamp into an empty bottle securely.
  2. Press the touch button to turn the lamp on/off and adjust the brightness level.
  3. To clean the product, use a dry, lint-free cloth.

Maintenance and Care:
Regularly check the condition of the product for any signs of damage. Avoid exposing the product to direct sunlight or extreme temperatures.

Battery Information:
The rechargeable battery is built-in and cannot be replaced. Avoid damaging the battery to prevent potential hazards.

Frequently Asked Questions (FAQ):

  • Q: Can I use this product with any type of bottle?
    A: The product is designed to fit most bottle necks, but ensure that the bottle base is stable and suitable for use with the lamp to prevent tipping or breakage.

  • Q: How do I adjust the brightness of the lamp?
    A: Use the touch button on the lamp to toggle between different brightness levels or to turn the lamp on and off.

Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

The product is an LED lamp with silicone stopper that fits in most bottle necks. It has a rechargeable battery, stepless dimming and touch panel control.
Important: The product has an IP54 ingress protection rating. It is protected against light splashes of water from any direction.

If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved. USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Delivery contents

  • Product
  • USB-C® cable
  • Operating instructions

Description of symbols

The following symbols are on the product/appliance or are used in the text:

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

  • The product is not a toy. Keep it out of the reach of children and pets.
  • Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
  • If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
  • Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

  • Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

  • Do not place the product under any mechanical stress.
  • Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
  • Protect the product from high humidity and moisture.
  • Protect the product from direct sunlight.

Operation

  • Consult an expert when in doubt about the operation, safety or connection of the product.
  • If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
    • is visibly damaged,
    • is no longer working properly,
    • has been stored for extended periods in poor ambient conditions or
    • has been subjected to any serious transport-related stresses.

Li-ion battery

  • The rechargeable battery is permanently built into the product and cannot be replaced.
  • Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
  • Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
  • Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
  • Never charge the rechargeable battery of the product unattended.
  • When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging.

LED light

  • Do not look directly into the LED light!
  • Do not look into the beam directly or with optical instruments!

Product

  • The material of the rubber stopper is not food-safe, the product must only be used with empty bottles.
  • Risk of tipping over and breakage! Use caution when selecting a bottle to use as a base. Bottles that are tall and/or have a narrow base may result in instability.

Product overview

  1. Touch button : ON/OFF, Dimming
  2. 5V DC 1A USB-C© input
  3. Silicone bottle stopper
  4. LED light panel

Charge the battery

  • Connect one end of the cable to a suitable power supply, connect the other end to the 5V DC 1 A charging input on the product.
  • Replace the charging input cover after disconnecting the USB cable.
  • The charging status is as follows: Red (charging), green (full charge).

Operation

  • Touch the ****button to switch the power ON/OFF.
  • Touch and hold the ****button to increase/decrease the brightness.

Cleaning and care

Important:

  • Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
  • Do not immerse the product in water.
  1. Clean the product with a dry, fibre-free cloth.

Technical data

This product contains a light source of energy efficiency class G.

  • Input ……………………………………………… 5 V/DC 1 A via USB-C®
  • Rechargeable battery ………………………. 3.7 V 1800 mAh 6.66 Wh Li-ion type 18650
  • Power consumption …………………………. 3.5 W
  • Charging time …………………………………. approx. 3.5 hrs
  • Runtime (approx.) ……………………………. 30 hrs (min. brightness) 3.5 hrs (max. brighness)
  • LED power ……………………………………… 2.8 – 3.0 V 60 mA
  • LED quantity …………………………………… 20 pcs
  • LED lifetime ……………………………………. 20000 hrs
  • Brightness ………………………………………. 15 – 200 lm
  • Colour temperature ………………………….. 3000 K (warm white)
  • Dimming ………………………………………… stepless
  • Ingress protection ……………………………. IP54
  • Protection class ………………………………. III
  • Bottleneck diameter (outer) ……………… max. Ø3.5 cm
  • Operating temperature ……………………. -20 to +40 °C
  • Storage temperature ……………………….. -20 to +40 °C
  • Dimensions (Ø x H) ………………………… 110 x 122 mm
  • Weight (approx.) …………………………….. 270 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals