CONRAD 2376398 1.2 m LED Strip Light Instruction Manual
- June 2, 2024
- CONRAD
Table of Contents
Operating Instructions
LED Strip Light (1.2 m)
Item no: 2376398
Intended use
This product is an LED strip light that can be cut to size. It connects to a
PIR motion sensor and is powered via mains adaptor.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, electric shocks or other
hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the operating instructions carefully and store them in a safe place. Make
this product available to third parties only together with the operating
instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
■ LED strip
■ PIR sensor
■ Power adaptor
■ Installation kit (2x sensor mounting screws, 2x cable holders, 1x sensor
mounting tape)
■ Operating instructions
Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.
Description of symbols
| The symbol with the exclamation mark in the triangle is used to indicate
important information in this document. Always read this information
carefully.
---|---
| Risk of electric shock!
| This product must only be used in dry, enclosed indoor areas. It must not
become damp or wet.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■ The product is not a toy. Keep it out of the reach of children and pets.
■ Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
■ If you have questions which remain unanswered by this information product,
contact our technical support service or other technical personnel.
■ Maintenance, modifications and repairs must only be completed by a
technician or an authorised repair centre.
5.2 Handling
■ If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no longer
be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■ Handle the product carefully. Jolts, impacts or a fall even from a low
height can damage the product.
■ Consult an expert when in doubt about the operation, safety or connection of
the appliance.
5.3 Operating environment
■ Do not place the product under any mechanical stress.
■ Protect the appliance from extreme temperatures, strong jolts, flammable
gases, steam and solvents.
■ Protect the product from high humidity and moisture.
■ Protect the product from direct sunlight.
■ Do not switch the product on after it has been taken from a cold to a warm
environment.
The condensation that forms might destroy the product. Allow the product to
reach room temperature before you use it.
5.4 Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
■ Connect the appliance to a wall socket that can be accessed easily.
■ As power supply, only use the supplied mains adaptor.
■ Only connect the power adaptor to a normal mains socket connected to the
public supply. Before plugging in the power adaptor, check whether the voltage
stated on the power adaptor complies with the voltage of your electricity
supplier.
■ Never connect or disconnect power adaptors if your hands are wet.
■ For safety reasons, disconnect the power adaptor from the mains socket
during storms.
■ Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter
(switch off the corresponding circuit breaker or remove the safety fuse, and
then switch off the corresponding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter
again.
5.5 Connected devices
■ Also observe the safety and operating instructions of any other devices
which are connected to the product.
5.6 LED light
■ Do not look directly into the LED light!
■ Do not look into the beam directly or with optical instruments!
5.7 Product
■ Always disconnect the product from the power supply:
– before assembling,
– when adjusting,
– when not in use for some time.
■ Do not attach objects to the product.
■ Never electrically connect the LED strip to other LED strips.
■ The LED lights are not replaceable.
Mounting
Important:
■ Do not bend the LED strip as this can damage the soldered joints.
■ Take precautions against electrostatic discharge (ESD) when mounting the
product.
■ If mounting the product on metal surfaces, the metal should be insulated
from the product (e.g., insulation tape). This is to prevent short circuits on
exposed contacts.
■ Connect all parts and cut the strip to length before mounting. Make sure the
power can reach the power socket.
■ The adhesive tape should be positioned correctly on the first attempt as it
cannot be reused.
■ Prepare the surface for mounting. It should be clean, flat, smooth, dry, and
non-porous.
Motion sensor
■ The motion sensor will only trigger the light strip when ambient levels fall
below a certain level e.g., night-time.
■ Adjust the TIME dial to control how long the light stays on for after it has
triggered.
Connection diagram
Important:
Do not connect the product to the power supply before connection and
installation is complete.
Read the “Safety instructions” and “Mounting” sections first.
Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free takeback of waste. Conrad provides the following return options
free of charge (more details on our website):
■ in our Conrad offices
■ at the Conrad collection points
■ at the collection points of public waste management authorities or the
collection points set up by manufacturers or distributors within the meaning
of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
Technical data
a) LED strip
Input ……………………………………….. 12 V/DC 0.25 A
Power consumption …………………… 3 W
Ingress protection ……………………… IP20
Illuminant …………………………………. 36 LEDs SMD
Colour temperature……………………. 3000 K (warm white)
Brightness………………………………… 200 lm
Protection class ………………………… III
Operating temperature ……………… -20 to +45 °C
Operating humidity …………………… 20 – 85 % RH
Storage temperature …………………. -20 to +50 °C
Storage humidity ………………………. 20 – 85 % RH
Dimensions (strip) …………………….. 120 x 0.21 x 0.8 cm (L x W x H)
Weight (approx.) ………………………. without reel: 25 g, with reel: 30 g
b) PIR sensor
Input ……………………………………….. 12 V/DC
Load ……………………………………….. max. 36 W
PIR sensor activation ………………… <20 lux
PIR sensor activation interval …….. (approx.) min: 10 secs, max: 30 mins
PIR sensor detection range ……….. 3 – 5 m
PIR sensor detection angle ……….. 60°
Weight …………………………………….. 10 g
c) Power adaptor
Input ……………………………………….. 220 – 240 V/AC 50 Hz 0.1 A max.
Output……………………………………… 12 V/DC 0.25 A 3.0 W
Protection class ………………………… II
Weight …………………………………….. 65 g
This product contains a light source of energy efficiency class G.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the
editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2376398_V5_0324_dh_mh_en 9007199497604363-2 I2/O5 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>