Conrad Electronic 2799087 eVacuum Kit Pro 3 Instruction Manual

May 15, 2024
Conrad Electronic

Conrad-LOGO

Conrad Electronic 2799087 eVacuum Kit Pro 3

Conrad-Electronic-2799087-eVacuum-Kit-Pro-3-PRO

Specifications

  • Product Name: eVacuum Kit Pro 3
  • Item Number: 2799087

Product Usage Instructions

Safety Instructions
Before using the eVacuum Kit Pro 3, carefully read and follow all safety instructions provided in the user manual to prevent personal injury or damage to property.

General Guidelines

  • The product is not a toy. Keep it out of the reach of children and pets.
  • Do not leave packaging material within reach of children as it may pose a hazard.
  • For unanswered questions, contact technical support or authorized personnel.
  • Maintenance, modifications, and repairs should only be done by a qualified technician or repair center.

Handling
Handle the product with care to avoid damage from jolts, impacts, or falls. Even low-height falls can cause harm.

Operating Environment

  • Avoid subjecting the product to mechanical stress.
  • Protect from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
  • Keep away from high humidity, moisture, and direct sunlight.

Operation
If unsure about operating the product safely, seek expert advice. Cease operation if safety is compromised.

Desiccants

  • Keep desiccants away from children and pets.
  • Do not open or puncture desiccant bags as they can be harmful if ingested or inhaled.
  • If contact occurs with eyes, rinse with water and seek medical attention.
  • Store desiccants away from ignition sources and open flames due to flammability.

Frequently Asked Questions (FAQ)

  • Q: Where can I find the complete operating instructions for the eVacuum Kit Pro 3?
    A: You can download the complete operating instructions from www.conrad.com/downloads or by scanning the QR code provided in the manual.

  • Q: Can children play with the product?
    A: The product is not a toy. Keep it out of the reach of children and pets to prevent accidents or injuries.

Intended use

The product is a 3D printer storage kit with an electric pump. The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.

Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Description of symbols
The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

  • The product is not a toy. Keep it out of the reach of children and pets.
  • Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
  • If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
  • Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

  • Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

  • Do not place the product under any mechanical stress.
  • Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
  • Protect the product from high humidity and moisture.
  • Protect the product from direct sunlight.

Operation

  • Consult an expert when in doubt about the operation, safety or connection of the product.
  • If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
    • is visibly damaged,
    • is no longer working properly,
    • has been stored for extended periods in poor ambient conditions or
    • has been subjected to any serious transport-related stresses.
  • Desiccants
    • Store them away from children and pets.
    • Never open or puncture the bags.
    • Desiccants can be harmful if ingested or inhaled. Seek medical attention immediately.
    • If splashed into the eyes, open eyelids and rinse with plenty of water. Seek medical attention immediately.
    • Desiccants are flammable under certain conditions. Always store them away from sources of ignition and never expose to open flames.

Cleaning and care

Important:

  • Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
  • Do not immerse the product in water.
  1. Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

  • in our Conrad offices
  • at the Conrad collection points

at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

  • Input (pump) …………………………….. 5 V/DC 2A
  • Operating/storage conditions …….. +5 to +40 °C, 20 – 85 % RH (non-condensing)

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Conrad Electronic User Manuals

Related Manuals