FLYINGVOICE PR08 8 FXS ATA Gateway Installation Guide
- August 14, 2024
- FLYINGVOICE
Table of Contents
FLYINGVOICE PR08 8 FXS ATA Gateway
Packing List
The following items are included in your package. Please contact your service provider, if you find anything missing.
Physical Specification
Port Description
Indicator Description
Device Installation
PR08 supports two installation methods, please use accessories from flyingvoice to install.
Desktop Positioning
Simply place the device horizontally on your desktop.
Wall-Mounted Installation
- Using the metal sheet included in the package, mark the wall mounting position on the wall;
- Drill 8 screws at the wall, allowing part of the screw beyond the wall for hanging the device;
- Using the screws included in the package, align the metal sheet with the holes and drive in the screws according to the 4 pre-drilled screw holes on the back of the device;
- After fixing the metal sheet and the device, snap the 8 wall mounting holes of the metal sheet onto the screws on wall and pull down the device to lock it in place.
Basic Configuration
-
Power Up: Use the supplied power adapter, plug one end into the PWR connector of the device and one end into a power outlet, and the device will start up automatically.
-
Networking: Use the supplied cable to connect the WAN port of the device to an available network adapter, if used with the Flyingvoice LM150, please connect the LAN port of the LM150 to the WAN port of PR08, the device will obtain an IP address automatically.
-
If you need to log in the Web configuration, please use the network cable to connect the LAN port of the device to the PC, enter the IP address of LAN port through PC browser (default: 192.168.1.1), and enter username and password(admin/last 6 digits of SN number), it will automatically jump to the status page.
-
If you need to connect to an analog phone, use the supplied telephone line to connect the FXS port of the device to an analog phone, and then configure the phone account in the Web Interface;
-
After all the above connections and configurations are completed, you can connect two power bank through two USB Type-C ports to serve as a backup power source for the device, so that it can supply power to the device in case of an emergency power failure and ensure the normal operation of the device.
Note : It is recommended to use C-to-C USB cable that support over 65w charging to connect, and the best specification is 65W PD 3.0. Some power bank need to be activated manually. -
If the device is used with other routers or CPE with 4-PIN power port, you can also use the 4PIN cable to power them, the UPS Port can be used to output uninterruptible power supply (up to 22W).
Flyingvoice Product Warranty Regulations
Dear Customer:
Thank you for purchasing the products of Shenzhen Flyingvoice Network
Technology Co., Ltd. Since the date of purchase, where the installation and
use in accordance with the quick installation guide, our company will provide
free maintenance within one year, after one year maintenance only charge the
maintenance fee. Maintenance for non-product quality issues, such as improper
use, improper storage, unauthorized disassembly and other issues for damage,
will be charged for maintenance fee.
Note : When applying for product maintenance, please send the warranty card in this guide and the purchased product back to the customer service department properly for maintenance.