FLYINGVOICE FTA5101 1 FXS VoIP Analog Telephone Adapter Installation Guide
- June 6, 2024
- FLYINGVOICE
Table of Contents
FLYINGVOICE FTA5101 1 FXS VoIP Analog Telephone Adapter
If you are configuring your device for the first time, you will find the steps included in this quick installation guide useful. Once you have configured the device with your settings, you will need to reboot the device for your changes to be applied. If you require additional information, please download the latest product manual from our website at www.flyingvoice.com.
-
Packing list
The following items are included in your package. Please contact your service provider, W you find anything missing.
-
Start up
Connect the WAN port of your device to your router or switch and the LAN port to your PC, also connect your analog phone to the phone port.
LEDs: After the hardware connections have been completed,
check the status of the LED indicators using the following table.
-
Network Configuration
Confirm your network access mode and record relevant information. Generally, there are three ways of network access: DHCP, Static IP, and PPPoE.- DHCP is the most common method where the ISP automatically configures your Internet connection.
- Choose “Static” W you know the network connection settings. Fill in the IP parameters provided by your ISP.
- If your ISP uses the PPPoE connection, they will provide you a usemame, password, and related instructions.In the PC that connected to the LAN port of the device, open a browser and type in “hllp://192.168.1.1” in the address bar, then press the “Enter” key. A Usemame and Password dialog box will appear. To login as an Administrator enter “admin” as the usemame and “admin” as the password. To log in as a normal user enter “user” as the usemame and “use(‘ as the password.
: Notice: In the event you are unable to open the page htlp://192.168.1.1 with your browser, it commonly caused by the IP address conflicts :
: with the WAN IP. In that case, open the page htlp://192.168.2.1 instead.
-
Phone Rrgistration
Click the ‘FXS’ tab to begin configuring the first SIP account for your device. Firstly, set the field ‘Line Enable’ to “Enable”. Then enter the SIP registration parameters provided to you by your phone provider as shown in the ‘Proxy and Registration’ and ‘Subscriber Information’ section.
