FLYINGVOICE FIP15G Plus IP Phone Installation Guide

: October 30, 2023
: FLYINGVOICE

Table of Contents

About This Guide
Packaging list
Assembling The Phone
Starting The Phone
Configuring Your Phone
Registering Your Phone
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FLYINGVOICE FIP15G Plus IP Phone

About This Guide

If you are installing the device for the first time, please read this manual in advance and configure it step by step. Reboot the device once you finish the configuration is required, including change the network environments, account number and so on. If you need more info, please go to our website (www.flyingvoice.com) and download the user manual.

Packaging list

IP Phone
Handset
Stand
Handset Cord
Ethernet Cable
Power Adapter (Optional)
QC PASS
Quick Installation Guide

Assembling The Phone

Wall mount the phone

Fix two appropriate screws on the wall, and leave them about 1/4 distance from the wall.
Attach the mounting bracket to the position to be installed, then align and insert the mounting hole and slide down, ensuring the bottom slot has engaged.

If you are using an external power supply, please connect the power supply, and plug the power supply into the DC 5V supply hub on the back of the phone. Note: Only the power supply from Flyingvoice is available.

Starting The Phone

After the phone is connected the power supply, it will start the intialization process automatically. After that, the LCD will display “Flyingvoice” logo and the phone will be ready to use.

Note :

If the phone does not show any above information on the screen, please re-confirm installation steps and the connections.
If it still doesn’t work, please replug the phone.
If there still no display on screen, please contact the administrator or service provider.
ONLY USB storage devices and USB dongles can be inserted into the USB port.

Configuring Your Phone

Network Settings

There are two ways to configure the network settings.
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings. e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If the phone can’t connect with DHCP server, please configure IP address, subnet mask, gateway address, primary DNS address and secondary DNS address manually.

Accessing the web management

Step1. Connect the phone to the Internet via the Internet port of the phone, connect your PC to the PC port of the phone with Ethernet cable.
Step2. Open web browser on your computer, enter the IP address (find the IP address by pressing Menu >My Status) into the address bar, and then press Enter key.
Step3. Enter the username (Default: admin) and password (Default: admin) in the login page and click Confirm.

Connect via wired network

Step 1. Power on the phone.
Step 2. Connect the Internet port of phone to the available network adapters (switches or routers) with Ethernet cable.
Step 3. If there is DHCP server in network, you can find the IP address by pressing Menu >My Status.

Connect via Wi-Fi

Step1. Press button, then choose Basic Settings >Wi-Fi via or button.
Step2. Choose “Available Network”.
Step3. Use or button to select the network and press soft key “Con” to connect with it. Input the password if WiFi authentication is required.
Note: If AP is connected, will appear in the status bar on the main interface.

Registering Your Phone

Input the device’s IP address in the address bar of the browser. Then you can login SIP Account configure of the phone. Choose Enable on Line Enable, input SIP Account parameters.

Configure information