FLYINGVOICE P23G IP Phone Installation Guide
- June 13, 2024
- FLYINGVOICE
Table of Contents
Quick Installation Guide
P23G / GW
www.flyingvoice.com
If you are installing the device for the first time, please read this manual in advance and configure it step by step. Reboot the device once you finish the configuration is required, including change the network environments, account number and so on. If you need more info, please go to our website (www.flyingvoice.com) and download the user manual.
Packaging list
Assembling the phone
Wall mount
the phone
Fix two appropriate screws on the wall, and leave them about 1/4 distance from
the wall.
Attach the mounting bracket to the position to be installed, then align and
insert the mounting hole and slide down, ensuring the bottom slot has engaged.
If you are using an external power supply, please connect the power supply,
and plug the power supply into the DC 5V supply hub on the back of the phone.
Note: Only the power supply from Flyingvoice is available.
Starting the phone
After the phone is connected the power supply, it will start the intialization
process automatically. After that, the LCD will display “Flyingvoice” logo and
the phone will be ready to use.
Note: If the phone does not show any above information
on the screen, please re-confirm installation steps and the connections.
If it still doesn’t work, please replug the phone.
If there still no display on screen, please contact the administrator or
service provider.
Configuring your phone
4.1 Network Settings
There are two ways to configure the network settings.
DHCP: By default, the phone attempts to contact a DHCP server in your network
to obtain its valid network settings. e.g., IP address, subnet mask, gateway
address and DNS address.
Static IP Address: If the phone can’t connect with DHCP server, please
configure IP address, subnet mask, gateway address, primary DNS address and
secondary DNS address manually.
4.2 Accessing the web management
Step1. Connect the phone to the Internet via the Internet port of the
phone, connect your PC to the PC port of the phone with Ethernet cable.
Step2. Open web browser on your computer, enter the IP address (find the
IP address by pressing Menu >My Status) into the address bar, and then press
Enter key.
Step3. Enter the username (Default: admin) and password (Default: admin)
in the login page and click Confirm.
4.3 Connect via wired network
Step1. Power on the phone.
Step2. Connect the Internet port of phone to the available network
adapters (switches or routers) with Ethernet cable.
Step3. If there is DHCP server in network, you can find the IP address by
pressing Menu >My Status.
4.4 Connect via Wi-Fi
Step1. Press button, then choose Basic Settings >Wi-Fi via ▲ or ▼ button.
Step2. Choose “Available Network”.
Step3. Use ▲ or ▼ button to select the network and press soft key “Con”
to connect with it. Input the password if Wi-Fi authentication is required.
Note: If AP is connected, will appear in the status bar on the main interface.
Registering your phone
Input the device’s IP address in the address bar of the browser. Then you can
login SIP Account configure of the phone. Choose Enable on Line Enable,input
SIP Account parameters.
Configure information
SIP
Account Parameters
| Name | Description | Name | Description |
|---|---|---|---|
| Enable Line | Enable Line or not | Display Name | The number displayed in callee |
| Proxy Server | Domain name or IP address of SIP server | Phone Number | Number of |
telephone provided by SIP proxy
Outbound Proxy| Outbound proxy IP or domain name| Account| SIP account
provided by SIP proxy
Outbound Port| Service port of outbound proxy| Password| SIP password provided
by SIP proxy
Proxy Port| The port which SIP server supports of VoIP service. (Default:
5060)