FLYINGVOICE P1X LTE IP Phone Installation Guide
- August 14, 2024
- FLYINGVOICE
Table of Contents
Quick Installation Guide
P1X LTE IP Phone
www.flyingvoice.com
P1X LTE IP Phone
If you are installing the device for the first time, please read this manual in advance and configure it step by step. Reboot the device once you finish the configuration is required, including change the network environments, account number and so on. If you need more info, please go to our website (www.flyingvoice.com) and download the user manual.
Packaging list
Assembling the phone
Fix two appropriate screws on the wall, and leave them about 1/4 distance from
the wall.
Attach the mounting bracket to the position to be installed, then align and
insert the mounting hole and slide down, ensuring the bottom slot has engaged.
Wall mount the phone If you are using an external power supply, please connect
the power supply, and plug the power supply into the DC 5V supply hub on the
back of the phone.
Note: Only the power supply from Flyingvoice is available.
Starting the phone
After the phone is connected the power supply, it will start the intialization
process automatically. And LCD will display “Flyingvoice” logo and the phone
will be ready to use.
If you use the LTE network, insert the SIM card into the card slot of the
phone, and the phone will display the IP address status of the LTE; if you use
the wired network, connect the network cable to the Internet port of the
phone, and the phone will display the IP address status of the Internet port.
TIPS: The number of signal grids indicates the signal strength of the
cellular network service. Note: If the phone does not show any above
information on the screen, please re-confirm installation steps and the
connections.If it still doesn’t work, please replug the phone. If there still
no display on screen, please contact the administrator or service provider.
Configuring your phone
4.1 Network Settings
There are two ways to configure the network settings.
DHCP: By default, the phone attempts to contact a DHCP server in your
network to obtain its valid network settings. e.g., IP address, subnet mask,
gateway address and DNS address.
Static IP Address: If the phone can’t connect with DHCP server, please
configure IP address, subnet mask, gateway address, primary DNS address and
secondary DNS address manually.
4.2 Accessing the web management
Step1. Connect the phone to the Internet via the Internet port of the phone,
connect your PC to the PC port of the phone with Ethernet cable.
Step2. Open web browser on your computer, enter the IP address (find the IP
address by pressing Menu >My Status) into the address bar, and then press
Enter key.
Step3. Enter the username (Default: admin) and password (Default: admin) in
the login page and click Confirm.
4.3 Connect via wired network
Step1. Power on the phone.
Step2. Connect the Internet port of phone to the available network adapters
(switches or routers) with Ethernet cable.
Step3. If there is DHCP server in network, you can find the IP address by
pressing Menu >My Status.
Registering your phone
Input the device’s IP address in the address bar of the browser. Then you can
login SIP Account configure of the phone. Choose Enable on Line Enable, input
SIP Account parameters.
Configure information
Basic Setup
Line Enable
Sync Clock Time
Outgoing Call without Registration
Proxy and Registration
Proxy Server 192.168.1.1
Outbound Server□
Backup Outbound Server
Allow DHCP Option 120 to Override SIP Server
Proxy Port 5060
Outbound Port 5060
Backup Outbound Port 5060
Subscriber Information
Display Name 621
Account 621
Phone Number 621
Password
SIP Account Parameters
| Name | Description | Name | Description |
|---|---|---|---|
| Enable Line | Enable Line or not | Display Name | The number displayed in callee |
| Proxy Server | Domain name or IP address of SIP server | Phone Number | Number of |
telephone provided by SIP proxy
Outbound Proxy| Outbound proxy IP or domain name| Account| SIP account
provided by SIP proxy
Outbound Port| Service port of outbound proxy| Password| SIP password provided
by SIP proxy
Proxy Port| The port which SIP server supports of VoIP service. (Default:
5060)