PARKSIDE PFGR 33 A1 Facade and Glass Cleaner Instruction Manual

: August 15, 2024
: PARKSIDE

PARKSIDE PFGR 33 A1 Facade and Glass Cleaner

Product Information

Specifications

Product Name: Facade and Glass Cleaner PFGR 33 A1
Suitable for: Cleaning glass surfaces and facades
Not suitable for: Commercial use
Compatible with: Parkside pressure washers of the specified series

Product Usage Instructions

Proper Use
The facade and glass cleaner is designed for cleaning glass surfaces and facades. It is essential to follow the manufacturer’s instructions for proper use. Do not use the product for commercial purposes. Improper use may result in damage for which the manufacturer is not liable.
General Description
The product comes with various accessories for glass and facade cleaning. Ensure that all components are present upon unpacking the product. Follow the assembly instructions carefully to set up the cleaner effectively.

Assembly

Mounting the Glass Cleaner:

Place the holder for the frame in the frame for the textile cover.
Attach the textile cover onto the frame for the textile cover using Velcro.

Mounting the Facade Cleaner:

Place the holder for the frame in the frame for facade cleaning with bristles.
The holder for the frame can be swivelled forwards and backwards in the frame.

Frequently Asked Questions (FAQ)

Q: Can this product be used on all types of glass surfaces?
A: The facade and glass cleaner is suitable for most glass surfaces, but always test on a small inconspicuous area first to ensure compatibility.
Q: How often should I clean the textile cover?
A: It is recommended to clean the textile cover after each use to maintain its effectiveness.

Facade and Glass Cleaner PFGR 33 A1

Facade and Glass Cleaner

Translation of the original instructions
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Introduction

Congratulations on purchasing your new product. You have chosen a high-quality product.
This product was quality-tested and subjec-ted to a final inspection during production, therefore ensuring proper functioning of your device.
The instruction manual forms part of this product. It contains important information on safety, use and disposal. Before using the product, you should famili-arise yourself with all operating and safety instructions. Use the product only as de-scribed and for the stated fields of applica-tion. Store the manual carefully and ensure that all documents are handed over in the event that the product is passed on to an-other user.

Proper use

The facade and glass cleaner is suitable for cleaning glass surfaces as well as facades. This product is not suitable for commercial use. The manufacturer is not liable for dam-age caused by improper use or incorrect operation.
The pressure washer attachment is suitable for Parkside pressure washers of the series PHD 110, PHDS 110 Silent, PHD 135, PHD 150, PHD 170, PHDM 110 Mini, PHDP 180.
Including adapter for other common pres-sure washers with a working/rating pres-sure of max. 150 bar, e.g. from Kärcher.

General description

The illustrations can be found on the front fold-out page.

Scope of delivery/accessories

Unpack the product and check for completeness:
Dispose of the packaging material properly.
Facade and glass cleaner:
- 1x holder for frame
- 1x textile cover for glass cleaning
- 1x frame for textile cover
- 1x frame for facade cleaning with bristles
- 1x adapter
- Instruction manual

Overview

Illustration

Adapter
Holder for frame
Frame for textile cover
Textile cover
Frame for facade cleaning with \ bristles
Coupling nut

Description of functions

Please refer to the descriptions below for information on how the operating elements work.

Technical data

Facade and glass cleaner …………….PFGR 33 A1
Maximum working/rated pressure
(P max) …………………. 15 MPa / 150 bar

Permissible pressure

(P max) …………………. 18 MPa / 180 bar
Flow rate (Q max) …………………..450 l/h
Inlet temperature (T max) ……………..60 °C

Adapter

Suitable for pressure washers with the
following performance data:
Maximum working/rated pressure
(P max) …………………. 15 MPa / 150 bar

Permissible pressure

(P max) …………………. 18 MPa / 180 bar
Flow rate (Q max) …………………..450 l/h
Inlet temperature (T max) ……………..60 °C

Safety information

Pay attention to the sensitivity of the surface when choosing the pressure washer accessory.
To prevent damage, please also note the manufacturer’s instructions for the object being cleaned.
Pay attention at all times.
Pay attention to what you are doing and go about your work with common sense.
Avoid abnormal body postures. Ensure secure footing and keep your balance at all times.
Keep your work area tidy. An untidy workplace can lead to accidents.
Wear suitable work clothing.
- When working outdoors, non-slip footwear is recommended.
- Wear a hair net to contain long hair.
Consider environment influences.
Make sure the workplace is well lit.
Use only original accessories and do not carry out any modifications.

Assembly

Mounting the glass cleaner

Place the holder for the frame (2) in the frame for the textile cover (3).
Attach the textile cover (4) onto the frame for the textile cover (3) with Vel-cro.

Mounting the facade cleaner

Place the holder for the frame (2) in the frame for facade cleaning with bristles (5).
The holder for the frame (2) can be swivelled forwards and backwards in the frame (3/5).

Operation

Connecting the pressure washer attachment

Connecting without adapter

Connect the accessory to your Parkside pressure washer via the high-pressure connection by inserting, pressing and turning (bayonet lock).

Connecting with adapter

Connect the adapter (1) to the access-ory by inserting, pressing and turning (bayonet catch).
Connect the adapter (1) to your Parkside pressure washer via the high-pressure connection by inserting, pressing and turning (bayonet lock).
Fix the connection by tightening the coupling nut (6).

Disconnecting :
Disconnection is done in reverse order.

Cleaning/maintenance

Perform the following cleaning work regu-larly. This will guarantee long and reliable use.

General cleaning work

Do not use any abrasive cleaning agents or solvents. These could damage the plastics irreparably.
Clean the pressure washer attachment with a damp cloth as needed.
The textile cover (4) of the glass cleaner attachment is washable up to 60 °C.

Maintenance

The device is maintenance free.

Storage

Always store the product:
dry.
clean.
out of the reach of children.

Disposal/environmental protection

The product and packaging should be properly recycled.
Take the product to a recycling plant. The plastic and metal parts used on your device can be properly sorted according to materials and grades and efficiently recycled. Please contact our service centre for more information.
We will dispose of any defective devices that you send to us free of charge.

Spare parts/Accessories

Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page 7).

Service-Center

Service Great Britain
Tel.: 0800 404 7657 E-Mail: grizzly@lidl.co.uk IAN 440089_2304

Importer

Please note that the following address is not a service address. Please initially con-tact the service centre specified above.
Grizzly Tools GmbH & Co. KG Stockstädter Straße 20 DE-63762 Großostheim GErMAnY
www.grizzlytools.de
Imported for GB market by:
Lidl Great Britain Ltd.
Lidl House, 14 Kingston Road
Surbiton, KT5 9NU

Grizzly Tools GmbH & Co. KG Stockstädter Straße 20
63762 Großostheim, GERMANY
Imported for GB market by: Lidl Great Britain Ltd, Lidl House, 14 Kingston Road Surbiton, KT5 9NU
Last Information Update
·Stand der Informationen: 09/2023 Ident.-No.: 30310098092023-GB/BE/NL

www.fsc.org