PARKSIDE IAN471082_2310 Router Bit Set Instruction Manual

Table of Contents

Model: IAN 471082_2310
Maximum Speed: 30,000 min-1
Abbreviations: MAN = For manual feed, HW = Uncoated hard metal on tungsten carbide base, TC = Tungsten carbide base

Can I use the router bits for commercial purposes?
- No, the router bits are intended for private use only and should not be used for commercial purposes.
What is the maximum speed for the router bits?
- The maximum speed is 30,000 min-1. Ensure not to exceed this speed to prevent damage or injury.

Introduction

We congratulate you on the purchase of your new product.
You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below.
Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place.
If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

OVERVIEW

Intended use

The router bits are designed for routing wood and wood-based material in a routing machine and may not be used for any other purpose.
This product is intended for private use and is not suitable for commercial purposes.

Abbreviations:

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury.

Always store these assembly and safety advice inside the box and keep it for further reference.
Observe the safety instructions supplied with the router you use with the router bits.
Router bits should be used only by persons of training and experience who know how to use and handle tools.

Protective equipment and personal precautions

Use suitable Personal Protective Equipment (PPE).

Wear eye protection.
Wear ear protection.
Wear respiratory protection.
Router bits can be very sharp. We recommend that you wear protective gloves when fitting or changing router bits (Fig. C).
It is not permitted to wear gloves when operating the router (Fig. D)!

Safe working practice

Maximum speed (max)
- The Maximum speed is 30,000 rpm
- The maximum rotational speed marked on the router bits must not be exceeded.
- Router bits with visible cracks must not be used (Fig. E).

Mounting and fastening of router (Fig. C)

Disconnect the router from the mains before fitting the router bits.
Tools and tool bodies should be clamped in such a way as to ensure they will not loosen during operation.
The router bits should be clamped to the marked point on the shank (Fig. C).
Care shall be taken of router bits to ensure that the clamping is by the shank of the tool and that the cutting edges are not in contact with each other or with the clamping elements.
Fastening screws and nuts should be tightened using the appropriate spanners, etc. provided by the manufacturer.
Extension of the spanner or tightening using hammer blows is not permitted.
Clamping surfaces should be cleaned to remove dirt, grease, oil, and water.
Clamping screws must be tightened according to instructions.

Cleaning
- Router bits should be cleaned regularly.
- Remove the bearing.
- Clean the router bits with lubricating oil.
- Tighten and lubricate the bearing.
Maintenance of router bits
- Repair or regrinding of the router bits is not permitted.
- Dull or damaged router bits must not be used.
Disposal
- The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
- Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.

Service
- Service Great Britain
- Tel.: 08000569216
- E-Mail: owim@lidl.co.uk.
- OWIM GmbH & Co. KG
- Stiftsbergstraße 1
- 74167 Neckarsulm
- GERMANY
- Model No.: HG05077
- Version: 03/2024
- www.lidl-service.com.