HYUNDAI FFAI-658CNK3A Tower Fan User Manual
- August 11, 2024
- HYUNDAI
Table of Contents
HYUNDAI FFAI-658CNK3A Tower Fan
To ensure safe use, please check whether the accessories and products are complete according the manual after opening the package. Please place the product on a horizontal surface for use. Do not put the product on an oblique or upside-down position. Before use, check whether the power supply is consistent with the rating label of the machine, and carefully read the precautions for safe use.
PRODUCT OVERVIEW
TECHNICAL SPECIFICATIONS:
- Cooler Power: 65W
- Heater Power: 2200W
- Voltage: 220V ~ 50Hz
- Material: ABS + PP
- Water Tank Capacity: 4L
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with
this type of product. The safety precautions enclosed herein reduce the risk
of fire, electric shock, and injury when correctly adhered to. Make sure you
understand all instructions and warnings. Keep the manual in a safe place for
future reference, along with any warranty information, your purchase receipt,
and the original packaging carton. If you sell or transfer ownership of this
product, pass on these instructions to the new owner. Always follow basic
safety precautions and accident prevention measures when using an electrical
appliance, including the following: Electrical Safety and Cord Handling
- Voltage : Make sure your outlet voltage and circuit frequency correspond to the voltage stated on the rating label. If this is not the case, do not use the fan.
- Water : To protect against fire and electric shock, do not immerse the cord, plug, or the fan itself in water or other liquids, or expose the electrical connections to water. Ensure your hands are dry before handling the plug or switching on the appliance. Do not use the fan outdoors or on wet surfaces. Protect it from liquid spills. No Adaptor, No Extension Cord: Do not use the heater with a power board or double adaptor as this may overheat and create a fire risk. Do not use it with an extension cord because the cord may overheat and cause a risk of fire.
- Damage: Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the manufacturer, its authorized service centers, or appropriately qualified personnel in order to avoid any hazards. WARNING! Do not pick up or operate the appliance if the power supply cord, plug, or housing is damaged, or after it malfunctions or has been dropped or damaged in any manner.
- Protect the Power Cord: Do not operate the fan with the cord coiled up; always fully unwind it. Do not twist or kink the cord or let it touch heated surfaces. Do not put any stress on the cord where it connects to the product. Never carry the fan by the cord. Arrange the cord away from any trafÏc area so no one will trip over it. Do not run the cord under carpeting or cover it with rugs or runners.
- Connection : To insert the plug, grasp it firmly and guide it into the outlet.
- Disconnection : Switch off and unplug the fan from the power outlet when it is not in use, during lightning storms, and before cleaning, servicing, moving, or storing the fan. Grasp the plug and remove it from the outlet; do not pull the cord when disconnecting.
Usage Conditions and Restrictions:
- Domestic Use Only: This appliance is intended for indoor household use only. It is not suitable for commercial, industrial, trade, or outdoor use. Do not use it for anything other than its intended purpose, and only use it as described in this manual. Any other use may cause fire, electric shock, or injury.
- No Clothes Drying: Do not use this appliance as a drying rack for clothing.
- Attachments: The use of accessories not intended for use with this fan may cause injuries to the user or damage to the appliance.
- Liability: We assume no liability for any damages or personal injury caused by misuse of the product and/or failure to follow these instructions.
- Usage Restriction: This fan is not intended for use by children and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children: This fan is not a toy. Supervise children to ensure they do not play with it. Close supervision is necessary when any appliance is used by or near children.
- Warning: Do not leave unattended during use! Always switch it off and unplug when not in use, if left unattended, and before cleaning and storing.
- Location: Place the fan on a dry, flat, stable surface to avoid overturning.
- Keep Clear: Ensure nothing is blocking the airflow outlet, air intake grilles, or ventilation openings.
- WARNING! DO NOT use the fan in the following areas:
- Near an open flame, a hot burner, oven, or other source of high heat.
- On a soft surface (such as carpet) or where it may tip over during use.
- Outdoors or in areas of high humidity.
- In a bathroom, laundry area, near a sink, washer, pool, or any source of water.
- Near curtains or in tight corners, to enjoy maximum airflow.
- In areas where paint, petrol, etc., are stored and there is a risk of explosion or fire from flammable gases, or in areas where substances are being sprayed.
- CAUTION! Personal Safety: Avoid contact with moving parts. Never insert fingers, pencils, or any other objects through the grilles when the fan is running, as this may cause electric shock and/or a fire hazard. Keep hair and loose clothing well away from the fan when it is in use.
- Children : Supervise children to ensure they do not play with the appliance when in heating mode. Close supervision is necessary when any appliance is used by or near children.
- Unattended : Do not leave the appliance unattended while it is in use.
- CAUTION Hot!: Accessible parts of this appliance (when in heating mode) can become very hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Be particularly careful when children and vulnerable persons are present. Always let the appliance cool down before touching it, even if it is unplugged from the power supply.
- To ensure personal safety, do NOT operate this appliance: In front of or immediately below a power point. Close to a radiant heat source. Behind a door. On long pile carpet or a flokati rug. Near a window where it may get splashed with rain. Near flammable materials or surfaces (such as furniture, curtains, pillows, bedding, papers, clothes), or near open flames. Keep flammable materials (i.e., curtains) at least 1 meter away from the front, sides, and rear of the heater. In an area where petrol, paint, or other flammable liquids are stored, e.g., a garage or workshop, as the heater has hot and arcing parts inside which may spark.
- Service : This appliance contains no user-serviceable parts inside. Do not attempt to open and repair the appliance yourself. Other components should only be serviced by a qualified technician. All covers are intended to prevent direct access to the heating elements and must be in place when the appliance is in use.
- Malfunction : In case of malfunction, disconnect the plug immediately and contact our after-sales support line for advice.
- Storage : To avoid damaging the appliance during storage or transport, keep the heater in a dry place, free from excessive vibration.
- Improper use : Improper use or installation may result in the risk of fire, electric shock, and/or injury. There will be no liability for any eventual damages caused by improper use or incorrect handling.
- WARNING : Do not use this appliance without adhering to the specified safety instructions and precautions mentioned above.
- DANGER!: Do not cover the appliance in any manner as it may overheat and become a fire risk.
- I hope this formatting helps to convey the safety instructions clearly. Let me know if you need further assistance!
PREPARATION
Before First Use:
- Unpacking: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the event it is to be disposed of, please recycle all packaging materials where possible.
- Safe Packaging Disposal: Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach and disposed of safely.
- Inspection: Unwind the cord to its full length and inspect it for damage. Do not use the appliance if the appliance or its cord have been damaged or are not working properly. In case of damage, contact our after-sales support center for advice on examination, repair, or return of the damaged product.
Assembly of the Base
- Before the appliance can be used, the two-piece base must be fitted together and attached to the underside of the fan.
- Place the two halves of the base upside down and align (A), then press to lock the two halves together and secure with 4 screws (B).
- With the fan body turned upside down, align the base onto the fan underside, insert, and tighten with a further 4 screws (C).
- Invert the product to the correct orientation, place it on the floor, and check that the product is stable. Ensure all parts are securely attached. Place the appliance in the correct position for use.
Upper water tray:
- The upper water tray (lift lid above control panel) is accessible via a hinged cover. Locate and fit the filter cartridge – place in the allocated slot.
- Water tank can alternatively be filled / topped up from this location, add water slowly to prevent spillage, shut lid, parts are secure and then place the appliance in the correct.
OPERATING INSTRUCTIONS
Using the Appliance:
- Decide on a location for the 3 in 1 tower fan, convenient to a supply socket. It is designed for floor use. Place it on a dry, level surface where it will not overturn during use. If moving the appliance, switch off and unplug it from the mains.
- Insert the power plug into an appropriate electrical outlet and switch on power to the outlet.
Switching the Appliance On/Off:
- Press the ON or OFF button on the control panel once to switch the fan on. The LED display will show the current ambient temperature.
Cooling:
- To activate the evaporative cooling function, press the «COOL» button. This will activate the pump, drawing water from the tank to the upper collection tray. Water will filter internally over the evaporative inlet filter. The water tank can be filled via the water tank directly or via the upper water tray.
WARNINGS:
- Before operation, ensure the water tank has been filled with fresh clean water to at least the minimum level and not beyond the maximum level. Refrigerated water can be used to assist with cooling.
- Never use water hotter than 30 degrees Celsius.
- Maximum tank capacity is 3L; never fill beyond the maximum line.
- The tank cannot be completely removed. Never apply force or try to fully remove it.
- Limit movement of the product when the tank is full. Decide on the intended location before filling. If relocation is required, take care to gently move it to avoid water spilling from the tank.
- Never leave the cooling function on for extended periods with the tank empty; this will cause the pump to run dry and may result in damage.
Timer:
- To activate the timer function, press the «TIMER» button. Each subsequent press will step through from 0-12 hours. When the desired time is reached, the LED screen will flash on/off to indicate the selected time (in hours) and the clock symbol will be activated to indicate the timer has been set. At the end of the preset period, the fan will automatically switch off.
Speed Selection:
- To control the fan speed, push the «SPEED» button to cycle between Low, Medium, and High speeds.
Swing/Oscillation of the Outlet Grille:
- To activate the swing grille function, press the «SWING» button. The outlet air grille will pivot from one side to the other.
- To switch off, press the «SWING» button once when the air is blowing in the desired direction.
Mode (Fan Function):
- There are three fan functions: Continuous (normal), Natural, and Sleep. Press the «MODE» button to cycle through the options.
- Natural Wind: Indicated by the tree symbol. The fan operates with varying speeds and switches on/off with a change every 2-3 seconds.
- Sleep Wind: Indicated by the moon symbol. On high speed, the first half hour operates as high Natural wind, the second half-hour operates as medium speed Natural wind, after which time it operates as low-speed Natural wind. On Mid-speed, the first half-hour operates as mid-speed Natural Wind, after that, it continues to operate as low-speed Natural wind. On Low speed, it operates as low-speed
- Natural wind continuously.
- Continuous (Normal) Wind Function: Activated after the third press of the «MODE» button.
Heating Selection:
- To activate the heating function, push the «HEATING» button to cycle between Low and High heat.
- Note : When using the heating mode for the first time, or after a long period of storage, it is normal for the heater to emit a burning odor due to lubricants used during production or from dust deposits. This will pass quickly. Ensure good ventilation.
Remote Control:
- Align the emitter of the front section of the remote control with the receiving window of the fan body (near the display screen).
- The remote control operates within an approximate distance of 5m and within an angle range of 30 degrees.
- All functions described can be activated/controlled using the remote control.
Battery Precautions
- WARNING! Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns. If swallowed, go straight to a hospital.
Battery Fitment/Replacement
- For first use or if the battery becomes flat, gently press on the upper portion of the battery cover, push, and slide to remove the cover and access the battery compartment at the backside of the remote control.
- Fit 2 x AAA type batteries carefully observing the battery polarity markings.
- Slide the battery cover back into the compartment of the remote control and make sure it has securely locked in position.
CARE AND MAINTENANCE
WARNING!
- Before cleaning, maintenance, or moving the appliance, switch off and unplug it from the wall outlet.
- Do not immerse the appliance in water or other liquids. Do not spray it with liquids. Do not allow water to drip on or into the housing.
- Never use petrol, solvents, harsh detergents, or abrasive or alkaline cleaners on the fan.
- Cleaning and Maintenance
- Dusting : Clean your fan periodically by lightly running a vacuum cleaner nozzle (soft brush) over the front outlets and rear grilles to remove any dust or dirt that may have accumulated inside or on the unit. Alternatively, use a soft, dry cloth for dusting.
- Stubborn Stains : Use a slightly damp, soapy cloth for stubborn stains, but be sure the cloth is not too wet. Use caution around the housing. Do not allow the electrical components to be exposed to water.
- Storage : If not in use for an extended period, store in a safe, dry location, protected from dust and located so it is not in direct sunlight. We recommend using the original carton for storage of the disassembled product (follow the assembly instructions in reverse order to disassemble). Alternatively, place a large plastic bag or piece of material over the top of the cleaned appliance for dust protection.
- Service/Repair: The appliance requires no maintenance and contains no user-serviceable parts. Do not attempt to take the motor unit apart, repair, or modify it. Do not operatethe fan if its power cord or plug is damaged, or when it is working abnormally. In case of damage or malfunction, or if the cord is damaged, have the unit repaired by trained personnel only, or contact the service centre for advice on repair or replacement.
RESPONSIBLE DISPOSAL
- At the end of its working life, make the appliance unserviceable by unplugging it from the power outlet and cutting the power cord.
- Do not throw this appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local council for advice on recycling facilities in your area.
Imported/Distributed by: The Investment Company Europe B.V.
Supplied by: HYUNDAI Corporation Holdings, Korea
Made in: P.R.C
PATENT PENDING
The artwork and design of this package are protected by European copyright law
and may not be reproduced, distributed, displayed, published or used for any
purpose without prior written permission. It is not permitted to alter, or
reproduce any trademarks or copyright notice from this package.
E-mail:cs@hyundaielectronics.nl
NL / EN:www.hyundaielectronics.nl
BE / FR:www.hyundaielectronics.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>