Verbatim UTA-10 GaN III 140W Universal Travel Adapter User Guide

QUICK START GUIDE
Universal Travel Adapter GaN Ill 140W
with 2 x USB-C® PD 3.1 & QC 4+ 140 WI
1 x USB-C® PD 3,0 18 WI
1 x USB-A QC 3.018 W
UTA-10

How it works

1. Multi-socket with safety shutter for child protection
2. Status LED
3. USB-C1/C2 PD 3.1 & QC 4+ (PPS Supported)140 W
4. USB-C3 PD 3.0 & QC 3.0 18 W
5. USB-A1 QC 3.0 18 W
6. Spare fuse
7. Fuse
8. Multi-plug
9. Adapter plug switches

Connection

a. Please insert the adapter into the socket. The Status LED will light up. If not, please check fuse.
b. Then nsert the plug of your device nto the adapter.

Connectivity

1. The following plug types are accepted by the adapter:
2. You can plug the travel adapter into the following Type outlets:

Please find a full list of country compatibility on the related product page on our website.

2-POLE UNEARTHED DEVICES

The travel adapter is suitable for use with most electronic devices up to 2500 Wat 250 V and 1000 Wat 100 V. The travel adapter is compatible with most USB devices.

Attention

Before use, move all sliders on the side completely back nto their starting positions.

Selecting your plug

Find the power outlet of the country you want to plug your device nto. The country outlets are shown next to the plugs.

1. Gently press the required slider and move it forward to the other side, until the plug comes completely out and locks.
2. Recover the plug: Please press and hold the slider. Release the hold position and continue to slide it back to the other side, unt l the plug is pushed completely back nside of the adapter.
3. For AUS only: Turn the two connector contacts outwards until they form an nverted “V”.
4. Now you can connect the adapter to the socket.

Changing the fuse

The travel adapter is equipped with a fuse, which automatically switches off if the adapter is overloaded. This happens when the current input from the socket exceeds 10 A or the terminal used requires more than 2500 Wat 250 V or 1000 W at 110V.
Before removing the fuse, unplug the travel adapter from the socket and disconnect all connected devices. If device was flooded with water or is wet, do not use intl fully dried.

Changing the fuse

1. Pull out the fuse holder and remover the fuse.
2. Firmly press and turn the sqare fuse cover and remove the square fuse.
3. Place the sqare fuse n the fuse holder and stick t back nto the adapter.
4. Close the replacement cover.
5. Don’t forget to get a new replacement fuse. Replacement fuse: 250 V 10 A, BS1362 approvaed.

Safety Instructions

• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Use the product only for the intended purpose.
• As with all electr cal products, this device should be kept out of the reach of children.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Keep the packaging in a safe place for future reference. It contains mportant nformation.
• The product is intended only for use inside buildings.
• Only use the article under moderate climatic conditions (0°C-35°C, humidity below80%).
• Do not use the product in areas in which electronic products are not permitted.
• Do not use the product in a damp environment and avoid splashing water.

Operation Warnings

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Before connecting a device, check whether it s suitable for the voltage/mains frequency available n the country.
• Do not operate the product continuously, as it s not designed for this.
• Do not cont nue to operate the product if it is visibly damaged.
• The product is not designed for operat on with other adapters.

Care and maintenance

• Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
• Only operate the product from a socket that has been approved for the device. Plug devices directly into the adapter and the adapter directly nto the socket.
• To disconnect please remove all devices from the adapter before removing the adapter from the socket.

Specifications

• AC Input: 100-250 V 50/60Hz

• Rating: 100-250 V, 10 A max. 2500 W max.
  Single port output mode:

• USB-C1/C2 PD 3.1 & QC 4+ (PPS supported): 3.3-11 V-5A,5V 3A, 9V 3A,12V 3A, 15V 3A, 20V 5A, 28 V 5A (140 W max.) each

• USB-C3 PD 3.0 & QC 3.0:5V 2.4A,9V 2A, 12V 1.5A (18 W max.)

• USB-A1 OC 3.0:5V 2.4A,9V 2A,12V 1.5A (18 W max.)
  Combined output mode:

2 Ports

• USB-C1+C2 Output mode:
  USB-C1:5V 3A,9V 3A,12V 3A, 15V 3A, 20 V 5A (100 W max.)
  USB-C2: 5 V 3A,9V 3A,12V 2.91A, 15V 2.33A, 20 V 1.75 A (35 W max.)

• USB-C1/C2+C3 Output mode:
  USB-C1/C2: 5 V 3A, 9V 3A,12V 3A,15V 3A, 20 V 5A (100 W max.)
  USB-C3: 5 V 2.4A,9V 2A, 12V 1.5A (18 W max.)

• USB-C1/C2+A1 Output mode:
  USB-C1/C2: 5 V 3A,9V 3A,12V 3A,15V 3A, 20 V 5A (100 W max.)
  USB-A1:5V 2.4A,9V 2A,12V 1.5A (18 W max.)

• USB-C3+A1 Output mode:
  USB-C3+A1: 5 V 2.4A (12 W max.)

3 Ports

• USB-C1+C2+A1 Output mode:
  USB-C1: 5 V 3A,9V 3A12V 3A,15V 3A, 20 V 3.25 A (65 W max.)
  USB-C2: 5 V 3A,9V 3A12V 2.91 A15V 2.33 A (35 W max.)
  USB-A1:5 V 2.4A,9V 2A12V 1.5A (18 W max.)

• USB-C1/C2+C3+A1 Output mode:
  USB-C1/C2: 5 V 3A,9V 3A,12V 3A, 15V 3A, 20 V 5A (100 W max.)
  USB-C3+A1: 5 V 2.4A (12 W max.)

4 Ports

• USB-C1+C2+C3+A1 Output mode:
  USB-C1:5V 3A,9V 3A,12V 3A,15V 3A 20 V 3.25 A (65 W max.)
  USB-C2: 5 V 3A,9V 3A12V 2.91 A,15V 2.33 A (85 W max.)
  USB-C3+A1: 5 V 2.4A (12 W max.)

• Total DC Output: 140 W max.

• Operating Temperature: 0 – 25°C

• Supports PD3.1, PD3.0, QC4+, QC 3.0, FCP, SCP, AFC, PPS, BC1-2 and more.

• Fuse: 10 A BS1362 compliant

• Safety shutter for child protection (can only be opened with force of more than 75N (7.5Kg) per hole)

• Dimensions (W x H x D): 93.1mm x 53.4mm x 55.3mm

• Weight: 264g

CAUTION

• Before use, please read this nstruction carefully! This prodcut does not convert voltage (AC-AC), to avoid possible damage to your device or other safety hazards, please make sure the power outlet you ntend to use has the proper voltage to run your device before using this adapter.
• Each country has its own regulations regarding the use of travel adapters, please check in each country before use.
• No grounding: This product s for use with unearthed or double nsulated appliances only.
• Indoor use only.

CAUTION
Misuse can ead to electrical shock.

Verbatim Limited Warranty Terms

Verbatim warrants this product to be free from defects in material and workmanship for a period of 2 years from date of purchase.
This warranty excludes batteries.
If this product is found to be defective within the warranty period, it will be replaced at no cost to you.
You may return it with your original cash register receipt to the place of purchase or contact Verbatim.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific computer software or hardware used.
VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to country.
Note
Verbatim may at any time revise the content of this user guide without further notice.
Rights
Copyright © 2023 Verbatim. No part of this document may be reproduced in any form or by any means, for any purpose, without the express written permission of Verbatim.
All rights reserved.
All other brands and product names referenced herein are property of their respective owners,

Assurance of compliance
Brand: Verbatim
Product Category: Travel Adapter
Product: 32125 Verbatim GaN Ill Universal Travel Adapter 140W UTA-10
CE Declaration of Conformity

The objects of the declaration are in compliance with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States:
Directives
Electromagnetic Compatibility: 2014/30/EC
Low Voltage Protection: 2014/35/EC
RoHS Directive: 2011 /65/EC
Annex II: 2015/863/EC

Test standards
EN 55032:2015/A11 :2020
EN 55035:2017/A11 :2020
EN 61000-3-2:2019/A 1 :2021
EN 61000-3-3:2013/A1 :2019
EN IEC 62386-1 :2020+A11 2020

RoHS Compliance
The products are in compliance with Directive 2011 /65/EU of the European
Parliament and of the Council of 18 December 2006, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments. Substances of Very High Concern (SVHC) including 235 substances contained in Candidate List of June 14th, 2023, are not present in this product range above permitted evels.

Substance restriciton|
---|---
Cadmium and its compounds (Cd)| 0,01 %
Mercury and its compounds (Hg)| 0,1 %
Lead and its compounds (Pb)| 0,1 %
Hexavalent Chromium and its compounds (Cr6+)| 0,1 %
Polybrominated Biphenyls (PBB)| 0,1%
Polybrominated diphenyl ethers (PBDE)| 0,1%
Bis (2-ethylhexyl) phthalate (DEHP)| 0,1%
Benzyl butyl phthalate (BBP)| 0,1 %
Dibutyl phthalate(DBP)| 0,1%
Diisobutyl phthalate (DIBP)| 0,1%

This declaration is the responsibility of the manufacturer.

Hussin Diraki Vice President Operations & QA; Eschborn, November 3rd, 2023

WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste.
For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local municipal household waste disposal service or shop from where you MS purchased the equipment.

Technical Support and Documentation

To download the user manual, access frequently asked questions or contact the Verbatim support team, please go to – www.verbatim.com/support.

• EUROPE/MIDDLE EAST/AFRICA: Verbatim GmbH, Dusseldorter StraBe 13, 65760 Eschborn, Germany
• AMERICAS: USA Verbat m Americas LLC. Charlotte, NC 28262
• AUSTRAUN NEW ZEALAND: Verbatim Austral a Ply Ltd, Unit 6, 450 Pr nces Highway, Noble Park, Victoria, 317 4 Australia
• ASIA: Verbatim Hong Kong Ltd, Unit 1101-02, 11/F, Energy Plaza, No. 92 Granville Road, Ts mshatsui East, Kowloon, Hong Kong
• Japan: Verbat m Japan LTD., 2-15-4 Kandatsukasamachi, Chiyoda-ku, Tokyo 101-0048, Japan

www.verbatim.comwww.fsc.org
P.36
2401

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>