gembird FC-K500 Computer Case Fornax Instruction Manual
- May 15, 2024
- GEMBIRD
Table of Contents
- REMARKS
- A: Package details
- B: Schematic diagram of wire interface
- C: IO panel introduction
- D: Chassis disassembly diagram
- E: Remove and install glass side panels
- F: The power supply installation
- G: Motherboard installation
- H: The graphics card installation
- I: Max CPU Height diagram
- J: Fan installation
- K: Water cooling installation
- L: SSD installation
- M: HDD installation
- Documents / Resources
gembird FC-K500 Computer Case Fornax
REMARKS
- Before installing and operating the device, read the following instruction carefully
- Before installing the device, check the list of components and their condition. In case of problems, contact the seller.
- To avoid personal injury and/or equipment damage do not insert objects or body parts into the device while it is operating
- Check wiring diagrams to avoid short circuits and/or damage equipment.
- Do not block the air inlets and outlets.
- Keep the device away from heat sources, sunlight, water and oils. Do not use in a high humidity environment. Place it on a stable, flat and vibration-free surface in a well-ventilated room.
- Do not clean with chemicals or wet cloths (chemicals: bleach, wax, benzene, alcohol, solvent, mosquito repellent, perfumes, lubricants).
- Wear protective gloves when handling the device to avoid cuts and injuries.
A: Package details
-
Motherboard screw
-
The power screw
-
HDD screw
-
Copper pillar
B: Schematic diagram of wire interface
Please refer to the manual that came with your motherboard for any specific connection instructions
C: IO panel introduction
D: Chassis disassembly diagram
E: Remove and install glass side panels
Metal side plate installation: buckle the side plate and fix it with two screws
F: The power supply installation
The power supply can be fixed by aligning the screw in the figure to the hole
position(ATX PSU :max length205mm)
Note: different types of power supply, hole location may be slightly
different, take the actual object as the standard.
G: Motherboard installation
According to the motherboard type (ATX/M-ATX/ITX), the copper pillars may need to be re-arranged manually according to the fixing locations specific to your motherboard
H: The graphics card installation
VGA length limit:385mm
I: Max CPU Height diagram
Max CPU Height: 165mm
J: Fan installation
Rear fan: 1X120MM(included)
K: Water cooling installation
Align the SSD holes and fix them with screws
L: SSD installation
Align the SSD holes and fix them with screws
M: HDD installation
Align the hard disk holes and fix them with HDD screws
N:Panel disassembly
Documents / Resources
|
gembird FC-K500 Computer Case
Fornax
[pdf] Instruction Manual
FC-K500 Computer Case Fornax, FC-K500, Computer Case Fornax, Case Fornax,
Fornax
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>