Hunter 52655 Xidane with LED Light 52 inch Ceiling Fan Instruction Manual
- June 16, 2024
- Hunter
Table of Contents
- 52655 Xidane with LED Light 52 inch Ceiling Fan
- Here is what comes in your box:
- Choosing the Right Installation Location
- Angled Mounting
- Installing the Ceiling Bracket
- Installing the Downrod
- Wiring the Fan
- Installing the Canopy
- Assembling the LIght Kit
- Installing the Bulbs and Glass
- Preparing the Remote
- Reversing the Fan
- Limited Lifetime Warranty
- Downrod
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
52655 Xidane with LED Light 52 inch Ceiling Fan
Xidane
Installation Manual
Model: 52655 Matte Black / 52656 Brushed Nickel
Fan weight ±2 lbs: 19.2 lbs (8.7 kg)
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your
home or office for many years. This instruction manual contains complete
instructions for installing and operating your fan. We are proud of our work
and appreciate the opportunity to supply you with the best ceiling fan
available anywhere in the world.
We are here to help!
This Instruction Manual is designed to make installation as simple as
possible. While working through this Instruction Manual, keep your smartphone
or tablet nearby. We have added video links to help you through the more
technical sections. If you are unfamiliar or uncomfortable with wiring,
contact a qualified electrician. We also provide telephone support at
1.888.830.1326 or visit us at HunterFan.com.
READ and SAVE These Instructions
WARNING
Warning
w.1 – To reduce the risk of fire, electrical shock, or personal injury, mount
fan directly from building structure and/or an outlet box marked acceptable
for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with
the outlet box.
w.2 – To avoid possible electrical shock, before installing or servicing your
fan, disconnect the power by turning off the circuit breakers to the outlet
box and associated wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent warning device, such
as a tag, to the service panel.
w.3 – To reduce the risk of electric shock, this fan must be installed with an
isolating wall control/switch.
w.4 – To reduce the risk of personal injury, do not bend the blade brackets
when installing the blade brackets, balancing the blades, or cleaning the fan.
Do not insert foreign objects in between rotating fan blades.
w.5 – Chemical burn hazard. Keep batteries away from children. This remote
contains a lithium button cell battery. If a new or used lithium button/coin
cell battery is swallowed or enters the body, it can cause severe internal
burns and can lead to death in as little as 2 hours. Always completely secure
the battery compartment. If the battery compartment does not close securely,
stop using the product, remove the batteries, and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Dispose of cells properly and keep away from children. Even used cells may
cause injury.
w.6 – Non-rechargeable batteries are not to be recharged. Exhausted batteries
are to be removed from the product.
w.7 – This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision. It is
recommended that children be supervised to ensure that they are not using the
appliance improperly.
w.8 – To reduce the risk of fire or electric shock or injury to persons, do
not use replacement parts that have not been recommended by the manufacturer
(e.g. parts made at home using a 3D printer).
Caution
c.1 – All wiring must be in accordance with national and local electrical
codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified
electrician.
c.2 – Use only Hunter replacement parts.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: modifications not approved by the party responsible for
compliance could void user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This product conforms to UL Standard 507.
Here are the tools you’ll need to complete your installation:
OPTIONAL
If mounting to a support structure, you will also need these tools.
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from different bags. Make
note of the symbol printed on each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
Find a part that is missing or
damaged?
Don’t take it back to the store. Let us make it right. Visit us at
HunterFan.com or call us at 1.888.830.1326.
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to
make sure it is a good fit.
Check the room dimensions:
Check the outlet box:
Checking the Ceiling Angle:
Standard Mounting If you have a flat
ceiling:
Hang your fan by a standard downrod. Some fans come with a shorter downrod for a Low Profile installation.
If you have an angled or vaulted ceiling:
- You will need a longer downrod. (sold separately at HunterFan.com)
- If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit. (Sold separately at HunterFan.com)
Angled Mounting
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should be used with
your Hunter ceiling fan when installing on high or angled ceiling. If your
ceiling is angled greater than 34° you will also need an Angled Mounting Kit.
Longer downrods and the Angled Mounting Kit are sold separately at
HunterFan.com.
Hunter Pro Tip:
Determining if you need an Angled Mounting Kit: Fold on the dotted line. Place
against edge againts the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you need an angled mounting
kit. 
Installing the Ceiling Bracket
You have two options for installation. Pick which one works best for your location. Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.
Hunter Pro Tip:
The machine screws are the ones that came with your outlet box.
Turn Power OFF
WARNING
To avoid possible electrical shock, before installing your fan, disconnect the
power by turning off the circuit breakers to the outlet box associated with
the wall switch location.
Installing the Downrod
Follow below if you are using the downrod that came pre-assembled in your box.
Need to install a longer or shorter downrod? Check out the guide at the end of
this manual. Back out the pre-installed setscrew so that the setscrew’s
threads are still engaged while the shank does not protrude and obstruct the
insertion of the downrod. Note: Fan style may vary.
Pass all wires to one side of horizontal bar in downrod assembly. Hand
tighten the downrod until it stops (at least 4–5 complete
revolutions).
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
- ALWAYS tighten setscrew with pliers.
- DO NOT hand tighten setscrew.
- CHECK the setscrew is tight using pliers each time you change fan direction.
Hunter Pro Tip:
The ground wire attached to the downrod is approximately 8 inches.
Progress Check:
Your fan should look like this.
Wiring the Fan
We know wiring is hard. Let’s make it easier.
Follow these steps to get your fan wired quickly and safely. Follow the route
below that best matches your wall switch setup. If you are unfamiliar with
wiring or uncomfortable doing it yourself, please contact a qualified
electrician.
Hunter Pro Tip:
Here is how to connect the wires:
Push the bare metal ends of the wires together and slide a wire nut over them.
Then, twist the wire nut clockwise until tight.
Give it a gentle pull to make sure none of the wires are loose.
WARNING
The ceiling fan must be grounded. If the ground wire for the installation
site is not present, immediately STOP installation and consult a qualified
electrician.
WARNING
All wiring must be in accordance with national and local electrical codes
ANSI/NFPA 70. If you are unfamiliar with wiring or in doubt, consult a
qualified electrician.
Hunter Pro Tip:
Have extra wiring?
Turn the wires upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one
side of the outlet box and the ungrounded wires on the other side of the
outlet box. Make sure that the wires are still attached to the wire
nuts.
Installing the Canopy
Installing the Blades:
Attach each blade to a blade iron using the blade washers, found in the
hardware bag, and the blade assembly screws, found in the hardware bag.
Repeat x5
Assembling the LIght Kit
Partially install two light kit
assembly screws, found in the hardware bag, halfway into the motor housing as
shown. It does not matter which two screw holes you choose.
Feed the wire plug through the center hole of the
upper switch housing, then wrap keyhole slots around the screws and twist
counterclockwise.
Connect the plugs from the upper and lower switch housings.
Make sure to line up the colored markings on the connectors. Lift the lower
switch housing until its screw holes are aligned with the screw holes in the
upper switch housing. 
WARNING
FAN FALL HAZARD
Make sure all screws are tight to secure the light fixture.
Installing the Bulbs and Glass
Preparing the Remote
The remote control is already paired for use. For your convenience, a remote function card is packed in with your remote.
NOTICE
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity (+ and -).
- Remove batteries from equipment which is not to be used for an extended period of time.
- Remove used batteries promptly.
Reversing the Fan
Limited Lifetime Warranty
Hunter Fan Company grants this limited warranty to the original purchaser of
this Hunter ceiling fan. This document can be found at
www.HunterFan.com.
Thank you for choosing Hunter!
How Can Warranty Service Be Obtained?
Proof of purchase is required when requesting warranty service. The original
purchaser must present a sales receipt or other document that establishes
proof of purchase. Hunter, at its sole discretion, may accept a gift receipt.
To obtain service, contact Hunter Fan Company online or by phone.
www.HunterFan.com/Support/Contact-Us/
1-888-830-1326
Please do not ship your fan or any fan parts to Hunter. Delivery will be
refused.
What Does This Warranty Cover?
Motor — Limited Lifetime Warranty
If any part of your ceiling fan motor fails during your ownership of the fan
due to a defect in material or workmanship, as determined solely by Hunter,
Hunter will provide you with a replacement fan free of charge. The foregoing
limited warranty applies only to the motor itself and does not apply to
electronic controls – such as remote control transmitters, remote control
receivers, or capacitors – used in conjunction with the motor. Such electronic
control items are included in the one-year limited warranty below.
Other — One-Year Limited Warranty
Except as otherwise indicated throughout this warranty, if any part of your
Hunter ceiling fan fails at any time within one year of the date of purchase
due to a defect in material or workmanship, as determined solely by Hunter,
Hunter will provide a replacement part free of charge.
Light Kits — Warranty May Vary
-
LED Light Kits — Three-Year Limited Warranty
If your LED light kit module (not including glass components) or LED bulb fails at any time within three years of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.* -
If no replacement product/part can be provided for your fan, we will provide a comparable or superior replacement product/part at the sole discretion of Hunter.
What Does This Warranty NOT Cover?
Labor Excluded. This warranty does not cover any costs or fees associated with
the labor (including electrician’s fees) required to install, remove, or
replace a fan or any fan parts.
There is no warranty for light bulbs (except where otherwise noted); remote
control batteries; fans purchased or installed outside the United States; fans
owned by someone other than the original purchaser; fans for which proof of
purchase has not been established; fans purchased from an unauthorized
dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished fans;
and fans that are damaged due to any of the following: improper installation,
misuse, abuse, improper care, failure to follow Hunter instructions,
accidental damage caused by the fan owner or related parties, modifications to
the fan, improper or incorrectly performed maintenance or repair, improper
voltage supply or power surge, use of improper parts or accessories, failure
to provide maintenance to the fan, or acts of God (e.g. flood).
ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH
RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN.
HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,
DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF
CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE
OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow
limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
How Does State Law Affect Warranty Coverage?
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
Downrod
If you need a different downrod length follow these steps: Follow steps 1-5 to remove standard downrod pipe
Follow steps 6-10 to reassemble
with new downrod
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
- ALWAYS follow the downrod assembly instructions exactly.
- VERIFY the downrod is assembled correctly by firmly pulling on the hanger ball.
- Pin must be reinserted to secure downrod assembly.
Here is another view of the downrod assembly unassembled. Assembled downrod should look like this
Troubleshooting
Fan Doesn’t Work
- Make sure power switch is on.
- Check the circuit breaker to ensure the power is turned on.
- Make sure the blades spin freely.
- Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
Excessive Wobbling
- Make sure the blades are properly installed on the blade iron posts.
- Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.
Noisy Operation
- Make sure the blades are properly installed.
- Check to see if any of the blades are cracked. If so, replace all of the blades.
Remote Control of Fan is Erratic
- Make sure the battery is installed correctly.
- Install a fresh battery.
Multiple Remote Issues
- If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.HunterFan.com/FAQs and click “How do I properly install multiple remote-controlled fans?” for information on how to correct this issue.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>