Advsound ADVSLEEPTWS Sleeper TWS Earphones User Guide
- June 5, 2024
- Advsound
Table of Contents
USER GUIDE
CHARGING SLEEPER TWS
- Put the earbuds inside the charging case.
- Plug the USB-C cable to charge.
- Or use a wireless charging pad. (Qi)
Charging the case
Battery lite 1-99%
Battery life 100%
Case battery status
Battery life 1-10%
Battery life 11-100%
PAIRING SLEEPER TWS
Open the charging case.
Turn on the BT function on your smartphone.
Find “ADV. SLEEPER TWS” inside BT device settings, and pair.
If the pairing is failed, put the earbuds back in the case, close, and open
again to repeat the pairing process.
WEARING SLEEPER TWS
AUTO ON/ OFF SLEEPER TWS
ON
Open charging case.
OFF
Close charging case with earbuds inside.
SLEEP MODE
RELAXED EQ
4 taps on the right earbud
••••
GAME MODE
DYNAMIC EQ
4taps on the right earbud
••••
LANGUAGE SWITCH
Make sure that the earbuds are turned on and are unpaired to any devices.
ENGLISH
2taps on the left or right earbud
••| JAPANESE
2 taps on left or right earbud
••
---|---
CONTROLS
TECH SPEC
| Impedance | 6mm full-range dynamic |
|---|---|
| Driver | 160hm+/-15% |
| Sensitivity | 100dB+/-3d8 at 1kHz |
| Frequency | 20Hz – 20,000Hz |
| BT version | 5.2 |
| Distance | 10m (33ft) |
| Music time | up to 15 hours [w/ case] up to 5 hours [earbuds only) |
| Charging time | 1 hour |
| Battery | 250mAh (case] 35mAh x 2 [earbuds) |
| Input port | USB-C port |
| Input power | 5V 1A |
3-YEAR LIMITED WARRANTY
The US. Warranty – For warranty information outside the US.please contact
your local distributor Warranty service is only available in the country of
original purchase This is an important document Attach your bill of sale to
this card and keep it in a safe place Your bill of sale is your warranty. The
warranty remains in effect for three years from the date of the first consumer
purchase
WHO IS PROTECTED BY THIS WARRANTY
The warranty protects the original owner and all subsequent owners, provided
that the ADV product was purchased from an authorized dealer in the United
States A copy of the original dated bill of sale must be presented whenever
warranty service is required
WHAT IS COVERED BY THIS WARRANTY
Except as specified below_the ADV warranty covers al defects in material and
workmanship. The following are not covered: damage caused by accident, misuse,
abuse, product modification, or neglect; damage occurring during shipment;
damage from failure to follow instructions contained in the instruction
manual; damage resulting from the performance of repairs by someone not
authorized b ADM, damage caused by the installation of parts that do not
conform to ADV specifications; units used for other than home and office use;
units not used for their intended purpose; any claims based on
misrepresentations b the seller; products sold on an as-is”or final sale
basis; or the cost of installing, removing or reinstalling the unit ADV’s
liability is limited to the repair or replacement, at our option, of any
defective product and shall not include incidental or consequential damages.
ADV reserves the right to replace a discontinued model with a comparable model
Any replacement units or parts may be new or rebuilt
TO OBTAIN WARRANTY SERVICE
lf you require warranty service, please return the product to your dealer If this is not possible and you live in the United States, please email support @adv-sound.com for information on how to obtain service or replacement If purchased outside the United States, contact your local dealer for repair or replacement You are responsible for transporting your product for repair or replacement
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.