Planet Buddies PBOWLHPW Wireless Headphones Instruction Manual
- June 12, 2024
- Planet Buddies
Table of Contents
Planet Buddies PBOWLHPW Wireless Headphones
Dear User,
Thank you for purchasing Planet Buddies’ Pepper the Penguin Wireless
Headphones. Before using them, please carefully read the information in this
product manual and keep it in a safe place for future reference.
Overview
Functions & Features
- Child-safe 85db volume limited audio to protect hearing
- Wireless compatible with iOS/Android
- Up to 38-hour total playtime (2 hours charging time)
- Built-in microphone
- Extra line-out jack for music sharing
- Strong, adjustable design for comfort and durability
- Foldable, portable design with carry pouch included
Included
- 1x Headphones
- 1x User manual
- 1x AUX-in cable
- 1x Type C charging cable
- 1x Carry pouch
Technical Specifications
- Profiles supported: A2DP/AVRCP/SMP/HFP
- Working range: 8-10M
- Resistance: 320+15%
- Sensitivity: 85+3db at 1 KHZ
- Frequency range: 20HZ ~ 20KHZ
- Charging voltage: 5V
- Charging current: 500mAh
- Operating voltage: 3.7V
- Operating current: 8MA ~ 15MA
LED indicator light
- Pairing: Flashes red and blue
- Power on: Static blue
- Music playing: Flashes blue slowly
- Standby mode: Static blue
- Incoming call: Flashes blue quickly
- Low battery: Flashes red quickly
- Charging: Static red, turns off when charged
User Instructions
Turn On
To turn ON the wireless headphones, press and hold for 3 seconds. The
headphones will turn on after the blue LED light has stayed on for 3 seconds.
Turn Off
To turn OFF the wireless headphones, press and hold for 3 seconds. The
headphones will turn off after the red LED light has stayed on for 3 seconds.
Volume Adjustment
Press + or – to adjust the volume.
Wireless Mode
Hold for 3 seconds to turn on the headphones. The LED indicator light will
flash red and blue alternately until the headphones are successfully
connected. Ensure that the headphones are no more than 10 meters away from the
device you want to pair. Use the Bluetooth search list on your device to find
and select ‘PB Penguin HP’ to pair with the headphones. To confirm you have
paired the headphones successfully with your device, the LED indicator light
will stop flashing and show static blue.
Music Selection
- Press > to SKIP to the next song.
- Press < to SKIP to the previous song.
- Press to PAUSE the music when playing.
- Press to PLAY the music when paused.
Hands-free Calls
- Press to ANSWER when a call is incoming.
- Press to HANG UP when on a call.
- Hold for 3 seconds to REJECT when a call is incoming.
If the headphones are connected to your mobile phone, double press to re-dial the last phone number in your call record.
Charging
When the battery is running low, the LED indicator light will start flashing red and the headphones will issue an audible warning. To recharge the headphones, insert the USB charging cable into the port on the earcup and connect with a compatible power source (laptop, computer, or via a mains plug adapter). To indicate that the headphones are charging, the LED indicator light will show static red which will then switch off when fully charged.
Power Status
When the headphones are connected with an iOS device (and SOME Android
devices), the current power status of the headphones will be shown in the
upper right corner of the device screen.
Line-in Mode
To listen via the AUX-in cable, insert the cable into the line-out port on the
right earcup. If you would like to listen to music wirelessly, you need to
remove the AUX-in cable and turn on the wireless mode.
Music Sharing
Connect any second pair of headphones via the extra line-out port on the left
earcup to listen to the same music. This is compatible with the wireless mode
and the line-in mode.
Warranty
This product is covered under a 12 month limited warranty for product defects. This warranty does not cover products which have been:
- damaged by consumer;
- opened and/or altered in any way;
- subject to normal wear and tear.
If you are experiencing any issues with your product that you can not resolve
using this user manual, please contact us at [email protected], attaching
proof of purchase, along with a photo of the defect.
Please read and keep all safety and use instructions.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories soecified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, objects have fallen into the apparatus, does not operate normally, or has been dropped.
- Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
- Do NOT make unauthorized alterations to this product.
- Do NOT use a power inverter with this product.
- Use this product only with the power supply provided.
- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
ATTENTION : THIS PRODUCT IS NOT A TOY. NOT SUITABLE FOR USE BY PERSONS UNDER 3 YEARS.
The crossed-out wheelie bin symbol means that the product must be disposed of separately in the European Union. These products must not be disposed of with unsorted household waste.
We, STRAX GmbH, declare under our sole responsibility, that the product “Planet Buddies Wireless Penguin Headphones (PBPGHPW)” conforms with the provisions according to directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: https://www.strax.com/compliance/
Distributor and EU importer: STRAX GmbH, Belgische Allee 52+54, 53842 Troisdorf, Germany, www.strax.com
For Europe
Frequency band of operation 2402 to 2480 MHz Bluetooth: Maximum transmit power
less than 20 dBm EIRP Bluetooth Low Energy: Maximum power spectral density
less than 10 dBm/MHz EIRP
Regulatory Information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. This manual is available online in other languages.
Please visit www.planetbuddies.com/manuals