BANNER 233717 Asset Monitoring Gateway with SNAP ID User Guide

Asset Monitoring Gateway (AMG) with SNAP ID Overview

The Asset Monitoring Gateway (AMG) with SNAP ID provides commissioning, monitoring, and alarms for up to 20
supported Modbus® and SNAP SIGNAL® enabled sensors and converters. The gateway scans for individual sensors or converters and auto-detects model information, allowing users to change and assign Modbus server ID numbers to commission custom systems.

Identified devices report relevant register data every ten seconds, providing the quickest path to data that Banner Engineering offers for SNAP SIGNAL® and Mod bus-equipped sensors. Connected units can be grouped and renamed. All relevant input registers can have threshold alarms assigned to them individually. The alarm status is indicated both on-screen locally by color and mirrored by the light on the enclosure.

All compatible sensors/converters attached to the Gateway are auto-detected locally (SNAP ID). All data and threshold settings/alarms are relayed to and mirrored in the Banner Cloud Data Services (Banner CDS) website using an Ethernet or cellular connection (requires additional Banner CDS data plan).

For more information, refer to the following documents on www.bannerengineering.com:

• Asset Monitoring Gateway with SNAP ID Instruction Manual, p/n 234288
• Asset Monitoring Gateway with SNAP ID Brochure, p/n b_51583459

Commission and Assign Connected Sensors or Converters

When commissioning several sensors, connect each new sensor/converter one at a time and repeat these instructions for each new sensor/ converter.

1. After the AMG has initialised (about one minute), touch the Utilities icon in the lower right corner of the main page to go to the main configuration/device information menu.

2. .In the Sensor Utilities column, touch Sensor Scan/ID Assign.
   The Sensor table will initially be unpopulated.

3. Connect any supported Banner Modbus sensor or S15 converter using a splutter cable or hub with power connected to the home run cable and a branch connected to the Gateway M12 connector on the bottom right of the enclosure. See the Asset Monitoring Gateway with SNAP ID Brochure, p/n b_51583459 for lists of supported S15 converters, Modbus sensors, and accessories.

4. Select Scan IDs and touch YES when prompted to confirm.
   The system is scanning for the sensors

Sensor Scan/ID Assignment screen with the sensors list populated

The Gateway scans for connected sensors for 20 seconds, as indicated by the red Scanning…. message displayed at the bottom of the screen. Previously undetected devices appear in the table as ID 1 in the second column. The model name and sensor type should match the attached sensor/converter. When initially commissioning devices, it is important to connect only one new sensor/ converter at a time. The gateway scans for new devices based on the default SID #1 so it is also important to change all identified devices’ SID # when you will be adding more than one device.

5. To change the detected devices’ SID #, highlight the sensor needing to be changed by touching the row in which it appears and select Change ID. Touch Yes to confirm.
   The Enter New ID field automatically increments to the closest available SID

   . (This field is also manually configurable.) After a SID # has changed, the

   sensor table repopulates and displays the new SID # associated with the learned device. All previously learned sensors continue to appear in the table unless they are deleted from the system using this screen.
   Connection example with limitless combinations of SNAP ID sensors and connectivity accessories

6. Asset Monitoring Gateway

7. Sensor

8. Folded Junction Block

9. Sp litter

10. Cord set

11. Ethernet

12. Optional Cellular Connectivity

13. Banner Cloud Data Services

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com

For patent information, see www.bannerengineering.com/patents.

Document title: Asset Monitoring Gateway with SNAP ID™ Quick Start Guide
Part number: 233717
Revision: B
Original Instructions
© Banner Engineering Corp. All rights reserved.

**233717

**

Mouser Electronics

Authorised Distributor
Click to View Pricing, Inventory, Delivery & Life cycle Information:
Banner Engineering:
AMG-SNAP-ID-A AMG-SNAP- ID-V

References

• Banner Engineering

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>