NINGBO FL10273 Folding Wireless Charger User Manual

NINGBO FL10273 Folding Wireless Charger

Product Usage Instructions

• Setting Up the Wireless Charger:
  • Ensure the Type-C cable is connected to a power source.
  • Place the wireless charging base on a flat, stable surface.
• Wireless Charging:
  • Connect the Type-C cable to the wireless charging base.
  • Place your phone vertically or horizontally in the designated slot on the charger.
  • Make sure your phone is correctly positioned in the charging zone.
• Safety Precautions:
  • Do not attempt to repair or modify the charger yourself.
  • Avoid knocking, dropping, puncturing, or squeezing the product.
  • Keep the charger away from implanted medical devices to prevent interference.
  • Do not place magnetic stripe cards or IC cards on the charging surface.
  • Avoid using the product in extreme heat and humidity conditions.

FAQs

• Q: What should I do if my phone is not charging wirelessly?
  • A: Check that the USB cable is securely connected and that your phone is correctly placed in the charging zone.
• Q: Can I repair the wireless charger myself if it stops working?
  • A: It is advised not to attempt repairs yourself to avoid damaging the charger or causing hazards. Contact customer support for assistance.
• Q: Can I use the wireless charger with any phone model?
  • A: The wireless charger is compatible with phones that support wireless charging technology. Ensure your phone is Qi-enabled for wireless charging functionality.

Product Overview

1. Wireless charging zone
2. USB Charging input (Type – C)
3. Slot for vertical phone
4. Slot for horizontal phone

Package content

1. Wireless charging base
2. Type – C cable
3. User manual

Product specifications

• Material: ABS
• Transmission distance: < 10 mm
• Operation temperature: -5 ~ 40°C
• Input: DC 9V/2A
• Output: 10W

Attention:

• Check that the USB cable is plugged in and that your phone is placed correctly in the charging zone.
• Do not remove or repair the charger yourself to avoid damaging the electronics in the charger, or any other hazards.
• Do not knock, drop, puncture, or squeeze the product.
• Chargers should be kept away from implanted medical devices (e.g. pacemakers, artificial ear cochlear, etc.) to avoid interference with implanted medical devices.
• Do not place magnetic stripe cards or IC cards (such as ID cards or credit cards) on the charging surface, or it may cause disfunctions.
• Do not use this product in places of extreme heat and humidity.

FCC

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC STATEMENT

• This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>