VEVOR TD-1004-08 Motorcycle Scooter Dirt Bike Carrier Instruction Manual
- August 7, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty Certificate www.vevor.com/support
MOTORCYCLE CARRIER
MODEL:TD-1004-08
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificatewww.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
IMPORTANT SAFEGUARDS
Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Adhere to all Department of Transportation(D.O.T.) requirements when using this product.
- Use common sense when working. Stay alert and concentrate when setting up and using this product. Never work while under the influence of alcohol, drugs, or medications.
- While assembling and using this product, keep the work area clean and well-lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose-fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing, and gloves away from moving parts.
- Always keep this stand away from children.
- Check the stand is in good condition before using it.
SAVE THESE INSTRUCTIONS
PRODUCT PARAMETERS
| Number of Motorcycles | 2 pcs |
|---|---|
| Rated Load | 600 lbs /272.4 kg |
| Maximum Allowable Wheel Width | 5.5 inch /137.9 mm |
| Main Material | Aluminum |
ASSEMBLY
| Item | Name | Reference Image | QTY |
|---|---|---|---|
| A | Bracket | 4 | |
| B | Bar | 1 | |
| C | Motorcycle Rack | 2 | |
| D | Ramp | 1 | |
| E | Screw M10x25 | 2 | |
| F | Anti-tilt Bracket | 1 | |
| G | Bolt M8x40 | 8 | |
| H | Bolt M8x20 | 8 | |
| I | Washer 8×1.5 | 16 | |
| J | Nut M8 | 16 | |
| K | Lock Pin φ10×140 | 2 | |
| L | Pin φ10×95 | 1 | |
| M | Strap | 8 | |
| N | Storage Bag | 2 |
Step 1:
Install the support brackets(A) onto the hitch bar(B) on the outside of the welded brackets using 4 pcs M8x20 Bolts (H). Leave bolts hand tight.
Step 2:
Place the motorcycle rack (C)between the support brackets and install 4 pcs M8x40 bolts (G), washers (I), and nuts (J). Securely tighten all 8 pcs support bracket bolts.
Install the other motorcycle rack platform rotated 180°of the first motorcycle rack platform and repeated Steps 1&2.
Step 3:
Insert the hitch bar into the trailer hitch, and install the hitch pin (L). Put “U” size steel down to the hitch bar, then assemble the bracket as the right picture shows. Slide the anti-tilt bracket (F)towards the vehicle and tighten the bolts evenly. They will pinch the bracket on the collar on the hitch, preventing excessive movement of the rack.
Step 4:
The ramp (D) stores on hitch bar with 2 PCS M10x25 screws (E).
Ramp Usage
Put the ramp on the motorcycle rack. Motorcycles can move along the ramp.
Step 5:
The optional lock pin (K) can be inserted into the front of the motorcycle rack to make the front wheel gap smaller.
Step 6:
Secure each motorcycle to the rack with tie down straps (M). Use two ratchet straps attached to the handlebars, two straps attached to the rear frame of the bike, and two wheel ties.
Ratchet Belt Use Method
A. Installation And Tightening
1. Thread the tail of the webbing from the outside in under the center slot.
2. Thread the tail of the webbing through the center slot.
3. Pull the tensioner handle back and forth.
B. Unraveling Method
1. Use your hand to pull the spring buckle on the handle.
2. Open the handle in a zigzag position.
3. Pull out the webbing here to untie it.
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support
Documents / Resources
|
VEVOR TD-1004-08 Motorcycle Scooter Dirt Bike
Carrier
[pdf] Instruction Manual
TD-1004-08 Motorcycle Scooter Dirt Bike Carrier, TD-1004-08, Motorcycle
Scooter Dirt Bike Carrier, Scooter Dirt Bike Carrier, Bike Carrier
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>