VEVOR HCST-36SI Drywall Stilts User Manual
- October 30, 2023
- VEVOR
Table of Contents
- VEVOR HCST-36SI Drywall Stilts
- Product Safety Instructions
- Product Package Content
- Product Specifications
- Product Assembly Instructions
- Adjusting the Stilt Height
- Product Usage
- Safety Instructions
- PACKAGE CONTENT
- SPECIFICATIONS
- ASSEMBLY INSTRUCTIONS
- ADJUST THE STILT HEIGHT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VEVOR HCST-36SI Drywall Stilts
If you have any questions or need technical support, please contact us at
CustomerService@vevor.com.
Please read all manual instructions carefully before operating. VEVOR reserves
the right to interpret our user manual. The appearance of the product may
differ from the images shown in the manual. We will not inform you of any
technology or software updates on our product.
Product Safety Instructions
- Inspect the stilts thoroughly before use. Ensure that all parts are free of damage and that all bolts and screws are fullytightened.
- Use this product only on level and flat ground surfaces with no low profile furniture or obstructions around.
- When adjusting the height of the stilts, take them off your legs first for safety concerns.
- Keep all straps fastened and secured before walking on the stilts.
- When walking on the stilts, never take a big step. Instead, make sure the stilts are raised well above the ground with each step.
- Never use the stilts to walk on a slippery surface.
- Never overload the stilts.
- Walk slowly. Do not run or walk fast on the stilts.
- Do not modify the stilts arbitrarily.
- Do not walk on the stilts if you are influenced by alcohol or drugs.
- Children are not allowed to use this product. Minors and seniors are not recommended to use this product.
- Ensure the surrounding area is clean when using this product. Always wear protective gear.
Product Package Content
- Skid-proof Rubber Sole x 2
- Metal Buckle x 2
- Supporting Stick x 2
- Bolt x 4
- Nut x 4
- 3-Position Heel Bracket x 2
Product Specifications
Model Series| Overall Dimensions (L x W x H)| Weight Capacity| Adjustable
Height
---|---|---|---
HCST-36SI| 36 to 50 inches (914 to 1267mm)| 225 lbs (102 kg)| Adjustable
Product Assembly Instructions
The assembly procedures of the two stilts are the same. Here we take one stilt as an example. You can follow the same steps to finish the assembly for the other stilt.
Step 1
- Insert the supporting stick through the side hole on the left stilt.
- Secure the end of the supporting stick on the side bracket of the left stilt with the bolt and nut. (The bolt and nut are preinstalled on the side bracket.)
Step 2
- Install the 3-position heel bracket on the top of the stilt with two bolts and two nuts.
- Thread the ends of the strap through the skid-proof rubber sole.
- Thread the end of the strap through their buckles.
- Fasten up the strap.
- Ensure that the strap is fastened tightly and then the preparation is finished.
- Use the straps on the stilt to secure your feet. Ensure that the straps are fastened tightly.
Adjusting the Stilt Height
Note: Before adjusting the height of stilts, take your feet off the stilts first.
Step 1
- Loosen and separate the 4 bolts on the stilts.
Step 2
- Adjust the height of the stilts. Ensure that the heights of both stilts are the same. After that, fasten the bolts.
Importer and Manufacturer Information
- Importer: WAITCHX
- Address: 250 bis boulevard Saint-Germain 75007 Paris
- Importer: FREE MOOD LTD
- Address: 2 Holywell Lane, London, England, EC2A 3ET
- Manufacturer: Suzhou Hongcai Exhibition Equipment Co.,Ltd.
- Address: No.429, Caifu Road, Cailian, Linhu Town, Wuzhong District, Suzhou, China
Product Usage
- Inspect the stilts before use to ensure that all parts are free of damage and that all bolts and screws are fully tightened.
- Use the stilts only on level and flat ground surfaces with no low profile furniture or obstructions around.
- When adjusting the height of the stilts, take them off your legs first for safety concerns.
- Ensure that all straps are fastened and secured before walking on the stilts.
- When walking on the stilts, take small steps and make sure that the stilts are raised well above the ground with each step.
- Do not use the stilts to walk on a slippery surface.
- Do not overload the stilts.
- Walk slowly. Do not run or walk fast on the stilts.
- Do not modify the stilts arbitrarily.
- Do not use the stilts if you are under the influence of alcohol or drugs.
- Children are not allowed to use this product. Minors and seniors are not recommended to use this product.
- Ensure that the surrounding area is clean when using this product. Always wear protective gear.
- Before using the stilts, assemble them according to the instructions provided in the manual.
- Adjust the height of the stilts if necessary by loosening and separating the bolts, adjusting the height, and then fastening the bolts again.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction. Please read all manual instructions
carefully before operating.
VEVOR reserves a clear interpretation of our user manual. The appearance of
the product shall be subject to the product you received. Please forgive us
that we won’t inform you again if there are any technology or software updates
on our product.
Safety Instructions
- Inspect the stilts thoroughly before use. Ensure that the parts are free of damage and that all the bolts and screws are fully tightened enough.
- Use this product only on level and flat ground surfaces and there is no low profile furniture and other obstructions around.
- When adjusting the height of the stilts, take them off your legs first for safety concerns.
- Keep all straps fastened and secured before you walk on the stilts.
- When walking on the stilts, never take a big step. Instead, make sure the stilts are raised well above the ground with each step.
- Never use the stilts to walk on a slippery ground.
- Never overload the stilts.
- Walk slowly. Don’t run or walk fast on the stilts.
- Don’t modify the stilts arbitrarily.
- Don’t walk on the stilts if you are influenced by alcohol or drugs.
- Children are not allowed to use this product. Minors and seniors are not recommended to use this product.
- Ensure the surrounding area is clean when using this product. Always wear protective gear (especially for the knee and elbow) and a helmet before using the product. It’s recommended that the beginner uses two supporting sticks for balance.
- It is forbidden to use this product on public roads or streets.
- When using the product, it is recommended to wear anti-slip shoes.
- The intended purpose of this product is for architectural decoration or ceiling repair. It is not for entertaining or dancing.
- It’s recommended to let the other 2 people assist the user stand on the stilts.
PACKAGE CONTENT
SPECIFICATIONS
Model Series
|
HCST- 36SI
---|---
Overall Dimensions
(L x W x H)
| 48” x 11” x 5.5”
(1220×280×140 mm)
Weight Capacity
| 225 lbs
(102 kg)
Adjustable Height
| 36” to 50”
(914 to 1267mm)
ASSEMBLY INSTRUCTIONS
The assembly procedures of the two stilts are the same. Here we take one stilt as an example. You can follow the same steps to finish the assembly for the other stilt.
- Insert the supporting stick through the side hole on the left stilt.
- Secure the end of the supporting stick on the side bracket of the left stilt with the bolt and nut. (The bolt and nut are preinstalled on the side bracket.)
- Install the 3-position heel bracket on the top of the stilt with two bolts and two nuts.
- Ensure that the strap is fastened tightly and then the preparation is finished.
- Use the straps on the stilt to secure your feet. Ensure that the straps are fastened tightly.
ADJUST THE STILT HEIGHT
NOTE:
Before adjusting the height of stilts, take your feet off the stilts first
.
Loosen and separate the 4 bolts on the stilts.
Adjust the height of the stilts. Ensure that the heights of both stilts are the same. After that, fasten the bolts.
- Importer: WAITCHX
- Address: 250 bis boulevard Saint-Germain 75007 Paris
- Importer: FREE MOOD LTD
- Address: 2 Holywell Lane, London, England, EC2A 3ET
- Manufacturer: Suzhou Hongcai Exhibition Equipment Co.,Ltd.
- Address: No.429, Caifu Road, Cailian, Linhu Town, Wuzhong District, Suzhou, China
E-mail: CustomerService@vevor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>