VEVOR TAL20VHSSCD Telescopic Pole Saw User Manual
- October 30, 2023
- VEVOR
Table of Contents
Support and E-Warranty Certificate
https://www.vevor.com/support
TELESCOPIC POLE SAW
USER MANUAL
Model:TAL20VHSSCD
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
PRODUCT COMPONENTS
- Chenille Microfiber Duster
- Saw with hooks
- Flip clamp lock device
- Aluminum telescopic pole
- Sponge handle
INSTALLATION
1. Unpack and take out the product to see if the parts are complete：Chenille Microfiber Duster1;Saw with hooks1;Aluminum telescopic pole1; User manual
- Chenille dust installation instructions：
Take out the chenille duster and telescopic pole, screw the chenille duster
into the screw head of the telescopic pole, and tighten it to use.
Installation instructions for saw with hooks：
-
Remove the fixing screws from the black handle of the saw with hooks and set them aside for later use.
-
Put the black handle of Saw with hooks into the connecting pole at the head of the telescopic pole, align the holes, screw in the fixing screws, and tighten them to use.
TELESCOPIC POLE OPERATING INSTRUCTION
Telescopic pole extension：
- Open the flip clamp, and keep it outward.
- Pull out the inner section into the appropriate position and close the flip clamp.
Telescopic pole fold：
- Open flip clamp, and keep it outward.
- Fold back the inner section into the outer section and close the flip clamp.
ATTENTION MATTERS
- The saw blades are sharp, so be careful when installing and using.
- This product is made of assembled multi-section aluminum pole . It is not recommended to do destructive product test to prevent the extension pole connectors and saw fracture.
- When installing the saw, it is necessary to ensure that all screws are tightened to prevent the saw blade loosening and causing accidents.
- After using the product, it’s better to disassemble and store it cleanly and safely
- There may be a certain bending after extending the telescopic pole horizontally.
This is a normal phenomenon of this kind of product, not a quality problem.
Manufacturer: Hangzhou Orientjohn Industry Co., Ltd.
ADD: No. 1, Hanma Road, Tongyi Village, Linpu Town, Hangzhou, Zhejiang,
China,311251.
Support and E-Warranty Certificate
https://www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>