VEVOR QYC1500 Adjustable Trailer Dolly User Manual
- October 30, 2023
- VEVOR
Table of Contents
QYC1500 Adjustable Trailer Dolly MANUAL TRAILER MOVER
User Manual
QYC1500 Adjustable Trailer Dolly
Technical Support and E-Warranty Certificate www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL:QYC1500
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
****[email protected]
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury.
- Check whether the tire has enough gas before use. If the tire gas is not enough, please inflate the tire before use.
- Check whether the screw part is loose, if yes, please tighten it.
- Do not overload. The maximum load is 420lbs.
CAUTION: Please read the instructions for safe operation carefully.
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded boat trailer dolly.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- Do not sit, stand or climb on this item.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not lift while loaded.
- To prevent tipping, push/pull using supplied handle only.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
- After use, please dry before storage to avoid rusting of bolts affecting use.
- This product can be pulled for people or cars. Please check it carefully before use.
Special Attention:
The small wheel must be straightened before use, and the accessories will bend
after the force is not straightened !
SAVE THESE INSTRUCTIONS
MODEL AND PARAMETERS
| Model | QYC1500 |
|---|---|
| Maximum Load | 1500Ibs |
| Product Size | (Hand-pulling Mode) LxWxH=127x109x83.5 cm |
(Car-hanging Mode) LxWxH=138x109x83.5 cm
Wheel| 16″ Pneumatic Tire
8″ Swivel Caster
Hitch Ball| Diameter:2″
Adjustable Height| 60-90cm
Material| Steel
STRUCTURE DIAGRAM
- Handle
- Hitch Ball
- Swivel Caster
- Pneumatic Tire
- Hitch Ball Cover
- Angle Adjustment
COMPONENTS
| 
---|---
ASSEMBLY
Tools needed
Socket Wrench
Manual Installation Method
Re-confirm that all parts are locked, and then Inflate the tires to a pressure
of 27KPa ,and it’s ready to go.
NOTE that do not exceed the prescribed tire pressure to avoid bursting.
Vehicle Installation Method
Step 1: Connect ④ and ⑧ with ⑲+⑳+⑱
Step 2: Install the hitch ball cover, insert ④ into ③ and lock tightly.
Re-confirm that all parts are locked, and then Inflate the tires to a pressure
of 27KPa ,and it’s ready to go.
NOTE that do not exceed the prescribed tire pressure to avoid bursting.
MAINTENANCE
- Do not overload.
- After use, please dry before storage to avoid rusting of bolts affecting use.
- Check bolts regularly for looseness.
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Wuqiang Xintianhong Tool Manufacturing Co., LTD
Address: Beiche Village, Wuqiang County, Hengshui City, Hebei Province
Made In China
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany
Technical Support and E-Warranty Certificate
www.vevor.com/support