True E7S Bluetooth Headset Instructions
- August 7, 2024
- TRUE
Table of Contents
True E7S Bluetooth Headset
Button Function
- Power on: Pick up the earbuds from the charging case. The earbuds will power on automatically or long-press the Touch button for 3 seconds.
- Power off: Put it into the charging case to automatically power off or long-press the Touch button for 5 seconds until the red light flashes.
- Play/Pause: Click one of the headset touch buttons during play to pause, and click the touch buttons to Replay during the pause.
- Answer/hang up the phone: Click one of the headset touch buttons to answer the call. To end the call, click one of the headset touch buttons to hang up.
- Reject the call: Long press the touch button for 2-3 seconds in the coming call.
- Recall the last number: Four hits the touch button In connect state
- Next: Double-click on the Secondary earbud.
- Previous: Double-click on the Main earbud.
- Volume up: three taps on the Main earbud
- Volume down: Three taps on the Secondary earbud
- Wake up Siri: Long press the touch button 2 seconds in connecting the state to activate Siri.
Pairing & Connection
Pairing method
- Take out from the charging bin or press and hold the left and right earphones’ multi-function buttons for 3 seconds to turn on until the red and blue lights flash alternately, enter the ear search pairing state, enter the ear pair automatic matching, and match the main ear(right ear)The red and blue lights are alternately flashing, the secondary ear is flashing slowly, and the paired ear is successfully played.
- Start the Wireless function of the mobile phone or other devices. If it is an Android mobile phone or device, please click the “Search for Wireless device” option. If it is the IOS system mobile phone or device, it will automatically search for the device;when searching for the model of the Wireless headset After that, click to enter the pairing; when the pairing is successful, the main(right)earphone will make; prompt to connect successfully, and the left and right earphones will turn blue and flash slowly, and enter the connected standby state. After the pairing is successful, the main ear is the right channel. The secondary ear is the left channel.
- The two earphones can also be paired with the mobile phone separately. The operation method can be operated according to the above step 2 operation method.
Charging Overview
- Earbud
- In charging: Red light long-on
- Charging full: No light
- Charger Case
- In charging: Green light flashes
- Charging full: Green light long-on
- The charge for earphones: Green light flashes
Product specifications
- Wireless Version: VS. 0+EDR
- Music time: 3-4hous
- Talk time: 4-5 hours
- Power display: Support
- Profiles Supported: A2D P/HFP/HSP/AVRC
- Earphone Charging time: About 40 min
- Charging case charging time: 3H
- Transmission distance: l0M
Note: Product parameters will vary depending on model, usage, environment, etc.
Precautions
- The earphones should be stored in a dry and ventilated environment. to avoid oil water moisture and dust affecting product performance.
- Avoid using stimulus, organic solvents, or items containing these ingredients to clean the earphones.
- The use of earphones should be correct as per the specification, pay attention to use the influence of the environment on the earphones.in order to ensure a smooth connection, it’s recommended that the distance between the earphones and phones within 10 meters.
- If the earphones failed to connect or with poor connection, pls do not take apart the earphones or the accessories on your own Otherwise no warrant.
- To charge the charging case, please use the standard charger or the charger that meets the requirements.
- ln order to ensure normal use, please ensure sufficient power of the earphones.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>