BORMANN BFN4015 45W Standing Fan Instruction Manual

: August 7, 2024
: BORMANN

Table of Contents

BORMANN BFN4015 45W Standing Fan
SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
COMPONENTS
ASSEMBLY
OPERATION
Remote Control
CLEANING AND CARE
WARRAΝΤΥ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BORMANN BFN4015 45W Standing Fan

Technical Specifications

Model	Power	Diameter	Speeds	Timer	Height settings	Other features
BFN4015	45 W	30 cm	3	0-7 h	60/90/120 cm	Multi PP Blades, Remote control

Components

A Base (x1)
B Pole assembly (x3)
C Fan body (x1)
D Fan blade (x1)
E Front grille (x1)
F Rear grille (x1)

Assembly

Take out the poles, fan body, and base from the package.
Secure the pole assemblies to the base by rotating clockwise.
Combine the assembled poles to the fan body, then put upright.

Operation

Plug the power cord into a power outlet; the product will emit a beep sound, indicating that the product is connected to the power supply.
Press the ON/OFF button to start the fan in mid-speed; press again to enter fan standby mode.
Press the SPEED key to set low, medium, or high speed (1, 2, or 3).
Press SWING to activate the swing function for automatic left and right rotation.
Press TIMER button on the remote control to set a time interval for auto turn-off (0-7 hours).
Press MODE on the remote control to switch between natural wind, sleeping wind, and normal wind modes.

FAQ

Q: What should I do if the fan is not working?
A: Check if the power cord is properly plugged in and try pressing the ON/OFF button again. If the issue persists, contact customer support.
Q: Can children use this fan unsupervised?
A: This fan may be used by children aged 8 years and over under supervision or with proper instruction on safe usage.

WWW.NIKOLAOUTOOLS.COM

SAFETY INSTRUCTIONS

Warning: Read the manual carefully before use. Failure to follow the warnings and instructions may result in tool damage, physical injury and/or damage to property. Store the manual in a safe place for future reference.

This fan may be used by children aged 8 years and over and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, provided they have received supervision or instruction on the safe use of the fan and understand the risks involved.
Adult supervision is required when the fan is operating around children.
Do not allow children to play with the fan.
Cleaning and maintenance shall not be performed by children without supervision.
Do not allow the fan and remote control to be operated in or around water or any other liquid.
Do not submerge the fan or remote into water or any other liquid.
Do not touch the blades when the fan is in operation.
Always disconnect the power cord before cleaning.
If the power cord is damaged, stop the use immediately.
Do not attempt to repair the fan by yourself.
Once the fan is assembled, do not remove the grilles.

TECHNICAL SPECIFICATIONS

Technical data

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

COMPONENTS

ASSEMBLY

Take out the poles, fan body and base from the package.
Secure the pole assemblies to the base by rotating clockwise.
Combine the assembled poles to the fan body, then put upright.

OPERATION

Plug the power cord into a power outlet, the product will emit a “beep” sound, indicating that the product is connected to the power supply.
Press the “ON/OFF” button, the fan will start and operate in mid-speed; Press this button again to enter the fan standby mode.
Press the “SPEED” key to set the low, medium and high speed of the fan. The display will show the speeds, 1 means low speed, 2 means medium speed and 3 means high speed.
Press “SWING”, the swing function is activated, the fan will automatically rotate to the left and to the right. Press the button again to deactivate the function.
Press “TIMER” button (this function can only be operated by the remote control). Press this button repeatedly to set a time interval after which the fan will turn itself off (From 0 hours – 7 hours, in 1 hour intervals).
Press the “MODE” button (this function can only be operated from the remote control). When the starting wind is normal, press this key and the wind will change between natural wind, sleeping wind and natural wind.

Changing the angle of the fan
The angle/tilt of the fan can be changed manually. Ensure the fan is turned off and unplugged before adjusting accordingly.

Remote Control

The effective distance of the remote control is about 5 m.
Repeatedly press the keys on the remote control to select the functions you need.

Adjusting the height

The pole assemblies can be removed to create different heights for the fan.
This results in three different configurations.

To change the configuration

Remove the fan body.
Rotate the pole assembly/assemblies anti-clockwise then remove.
Resecure the fan body onto the remaining pole assembly/base.

CLEANING AND CARE

Ensure the fan is turned off and unplugged before cleaning.

Wipe the exterior with a soft cloth dampened with a mild detergent.
Remove any soapy residue with a dry cloth.

Notes:

Do not disassemble the fan to remove dust.
Do not use any abrasive detergents or solvents during cleaning to avoid scratching or damaging the surface of the fan.
Do not use gasoline or thinner for cleaning.

ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of recyclable materials and can be disposed accordingly. The tool’s plastics components are marked according to their material, which makes it possible to remove environmental friendly and differentiated because of available collection facilities.

Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
WWW.NIKOLAOUTOOLS.COM

WARRAΝΤΥ

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respective European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use and 12 months for chargers and batteries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respective required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportation (to and from) is entirely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chokes etc.).
Tools damaged as a result of non-compliance with the instructions of the manufacturer.
Tools poorly maintained.
Use of improper lubricants or accessories.
Tools given to third entities free of charge.
Damage due to an electrical connection at a voltage other than that indicated on the appliance plate.
Connection to a non-earthed power supply.
Change in current voltage.
Damage resulting from the use of salty water (e.g., washing machines, pumps).
Damage or malfunction resulting from improper cleaning procedure of the tool.
Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
Tools that have been modified or opened by unauthorized personnel.
Tools used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specific spare part the company reserves the right to replace the tool with another corresponding model. After all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. Replacement of a spare part with repair charge is covered by a 1 year warranty of good operation, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those mentioned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relative regulations apply to this warranty.

The instructions manual is also available in digital format on our website www.nikolaoutools.com. Find it by entering the product code in the Search “ ” field.