AiM MX Strada series Dash Display with Road Icons User Manual

AiM MX Strada series Dash Display with Road Icons

USER MANUAL

MX 1.2 + 1.3 Strada series

Specifications:

• Display:

  • MXG Strada: 7″ TFT, 800*480 pixels, 1000:1, 800cd/m2
  • MXP Strada: 6″ TFT, 1280*480 pixels, 600:1
  • MXS Strada: 5″ TFT, 1100:1
  • MXT Strada: 10″ TFT

• Features:

  • Ambient Light Sensor: Yes
  • Alarm Display Icons: 8 configurable
  • Shift Lights: 10 configurable RGB LEDs
  • CAN Connection: CAN, RS232 or K-Line to 1.000 + industry
    leading ECUs

• External Modules:

  • GPS Module, Channel Expansion, TC Hub (necessary to connect
    thermocouple sensors), Lambda Controller, SmartyCamHD

• Dimensions & Weight:

  • MXG Strada: 237127.626 mm, 950g
  • MXP Strada: 189.6106.424.9, 640g
  • MXS Strada: 169.49723 mm, 480g
  • MXT Strada: 27813543.2 mm, 1100g

• Power & Connectivity:

  • Power Consumption: MXG – 400mA, MXP – 450mA
  • Waterproof: IP65

Product Usage Instructions:

Configuration via Software:

The MX Strada series needs to be configured via software, but some functions can be managed via the device lateral buttons.

Menu Navigation:

To access different functions, press the Menu button to bring up the following icons for management:

• Date/Time
• Counters
• Backlight
• GPS and Tracks
• Video in (optional additional rear cameras)
• Lap Time setup (with GPS Module connected only)
• System Info

Date and Time Settings:

You can set the date and time for each track. The current time and date are shown at the bottom of the page.

Track Information:

To view stored tracks and track maps, scroll to Tracks Info. You can set the track List Type to display nearest tracks based on your current position.

Firmware and Software Updates:

To update firmware and software versions, connect MX Strada to AiM Race Studio 3 software on a PC using the USB cable provided in the kit.

Frequently Asked Questions (FAQ):

How do I load a reference lap on MX Strada?

A reference lap needs to be loaded using Race Studio 3 software as explained in paragraphs 5.5.3 and 5.5.4 of the user manual.

How do I configure channels on MX Strada?

All channels can be set through the AiM Race Studio 3 software.
The RPM channel is enabled by default and automatically disabled when an ECU protocol is selected.

References

• Tienda Deportiva Sportline: Productos para Todos los Deportes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>