PHILIPS LL212X CoreLine Trunking Gen2 LED Light Instruction Manual
- June 9, 2024
- Philips
Table of Contents
PHILIPS LL212X CoreLine Trunking Gen2 LED Light
IN THE BOX
Prevent water from entering on or in the iluminare at installation and during use of the luminaire.
Installation
All Steps
Inrush current
Warning! The values on the left are for 1.5 mm thick cables, the values on the right are for 2.5 mm thick cables
Maintenance Instructions
To assure the lighting quality of this unique LED lighting concept there are a few instructions regarding the maintenance of this LED luminaire:
-
Do not touch electronic components!
Electronic components are under high voltage.
Electronic components are ESD sensitive. -
During installation or when maintaining the luminaire please use static free gloves to avoid marks on the luminaire.
-
To remove dirt and spots use the following:
Dust: only use micro fiber cloths Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties. -
Do not stare into the LED light beam.
-
To avoid scratches and dirt on optical parts remove protective foil after installation.
-
The luminaire shall be installed by a qualified electrician and wired in accordance with the lastest IEE electrical regulations or the nationak requirements.
-
The light source of this luminarie is not replaceable: when the light source reaches its end of life whole luminare shall be replaced.
-
Driver insulation: Basic according to IEC 61847-1.
Disconnect be fore servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Printed in Poland
Data subject to change without notice
Keep for future reference:
www.philips.com/lighting