ET2 E41351 Landscape Spot Light Instruction Manual
- August 5, 2024
- ET2
Table of Contents
ET2 E41351 Landscape Spot Light
- 1 XLED 5W(Included)
- Please consult a qualified electrician before installing
Before Getting Started
- Read the instructions carefully before assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product near where you intend to install it.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation!
- Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock!
- Disconnect from the power source before assembling or cleaning.
- Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
EXTERIOR
WET LOCATION: For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.
PARTS
Before getting, started, ensure the package contains the following components:
INSTALLATION INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>