kogan 6500 Lumens Full HD Wifi Projector User Guide

**kogan 6500 Lumens Full HD Wifi Projector User Guide

**

SAFETY & WARNINGS

Read this manual fully and carefully before using the product.

• Do not look directly into the light from the projector.
• A direct burst of Intense light can harm your eyes and cause severe damage to the eyes of infants.
•  Do not use or store the projector in a damp, humid environment.
• Do not attempt to repair this product yourself. If the product or its power supply experiences any malfunction or damage, stop using it immediately and contact Kogan.com to arrange a repair.
• Ensure the projector is a safe distance from other heat-emitting devices or the service life of the projector may be shortened.
• It is strongly suggested not to use the projector for more than 6 hours
  consecutively.

COMPONENTS

• Projector
  

• Remote Control

• Power Cable

• 3-in-1 Video Cable

• HDMI Cable

• AAA Battery (x2)

• Lens Cover
  

• Warranty Card
  

• User Guide
  

OVERVIEW

Remote Control

OPERATION

Getting Started

1.  Remove all packaging material including the blue plastic film from the metal surface of the projector.
2.  Connect the projector to a power outlet using the supplied cable, the indicator light on will turn RED.
3.  Press the power button on the projector or remote control, it starts work, the indicator light on will turn WHITE.
4.  The boot screen appears.
   

Image Adjustment
To achieve a clear image:

1. Adjust the keystone correction to make the picture a rectangle.
2. Adjust the focus ring to make the picture clear.

Keystone:

Focus:

Connect Input Devices

Use the source button to select the desired signal source (USB/HDMI 1/HDMI 2/AV/VGA).

1. On the remote control: Press “   ” and press “  ” or “ ” to select the source. To confirm press “OK”.
2. On the projector: press “S” and then press “  ” or “ ” to select the source. To confirm press “OK”.

PC:

1. Connect projector to a PC using either a VGA cable (not supplied) or HDMI cable.
2. Select either “HDMI” or “VGA” (depending on the cable you have used) on the input select screen.

MacBook or MacBook Air:

1. Connect projector to a Mac using either a Type-C to HDMI adapter to connect your MacBook or a Mini Display to HDMI adapter to connect with your MacBook Air (adapter not included).
2.  Select “HDMI” on the input select screen.

USB:

1. Insert a USB storage device into one of the USB ports on the projector.
2. Choose “USB” on the input select screen.
3. Select from: “Video, Music, Photo or Text”.
4. Confirm the file you want to play.

Soundbar:

1. Use the supplied AV cable to connect to a soundbar.
2. Turn on both the projector and the soundbar.
3. The projector will output all audio to the soundbar.

AV:

1. Connect the projector to your AV device using supplied 3-in-1 composite AV cable to the projector.
2. Turn on both the projector and AV device.
3. Choose “AV” on the input select screen.

Amazon fire TV Stick:

1. Plug the TV Stick into the HDMI port of the projector.
2. Choose “HDMI” on the input select screen.
   Note: only 1080P TV Sticks are supported, not the 4K TV stick

Game Console:

1. Connect the game console to HDMI port of the projector.
2. Turn on both the projector and game console.
3. Choose “HDMI” on the input select screen.

Wireless Connection (Android device only):
To activate this function, your Android device must support the Multi creen/Wireless display.

1. Select “Mirroring” on the input source screen.
2. Ensure your Android device is connected to the internet.
3. On your Android device use the “Multi-Screen” function to search and connect to the projector.
   

The fluency of screen mirroring with a wireless connection will be affected by the network environment.

1. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Ensure your Android device is close to the projector when using a wireless connection. A distance within 1 meter is recommended.

HDMI CEC:
CEC (Consumer Electronics Control) allows users to control multiple HD devices that support CEC with one remote control, eliminating the need to use multiple remotes to control your devices.

1. Connect device(s) which support CEC to the projector by HDMI.

2. Choose SETTING > OPTION > HDMI CEC > Device List.
   

3.  Search for and select the device(s).
   

Ceiling Mount Installation
This projector is compatible with most universal wall mounts (sold separately).

1. Remove the four rubber feet.
2. Enter MENU > PICTURE Projection Mode and select the ceiling-mounted.
   

SPECIFICATIONS

Imaging System
LCD

Light source
LED

Colour
16.8m full colour

Projection Distance
1.5~7m

Projection size
50-300″

Aspect Ratio
16:9 / 4:3

Keystone Correction
±15°Vertical Manual

Power
110-240V~50/60Hz

Dimension
30.5 x 24.5 x 8.7cm

Resolution
Native 1920×1080 Full HD

Input Interface
HDMIx2/VGA/AV/ USBx2/AUDIO IN

Zoom Function
100%-75%

Output Interface
AUDIO OUT

Projector Weight
= 2.5kg

Projection Size and Distance
Optimum projection distance: 3m

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>