Empsun

Empsun Wired Earbuds Headphones with Microphone Stereo Bass Earphones

Specifications

• CONNECTIVITY TECHNOLOGY: Wired
• NOISE CONTROL: Sound Isolation
• SPECIAL FEATURE: Tangle-Free Cord, Lightweight, Noise Isolation
• INCLUDED COMPONENTS: Earbuds
• HEADPHONES JACK: 3.5mm Jack
• AUDIO JACK: 3.5mm
• COMPATIBILITY: iPod, iPhone, iPad, Android smartphones , tablets, mp3 players music speaker
• PRODUCT DIMENSIONS: 0.94 x 0.66 x 0.55 inches
• ITEM WEIGHT: 0.7 ounces

Introduction

With an in-line microphone, you can easily make calls, end calls, play, pause, and answer questions, as well as forward and backward-switch tracks. The in- ear headphones with microphone work with a variety of equipment, including phones, computers, laptops, MP3 players, and MP4 players, as well as equipment for the gym, playing games, and listening to music. There is no volume control on the in-ear headphones with a microphone. Comfortable in-ear headphones with a great seal that reduces outside noise so you can clearly hear the beats don’t put any strain on your ears, they can lessen the cumbersome feeling of wearing earphones, and they can boost comfort.

Earbuds are ideal for daily use since they feature a balanced tone adjustment, strong bass, and great stereo sound. In-ear headphones work with a variety of devices that have a standard 3.5mm audio jack, including iPod, iPhone, iPad, Android smartphones, tablets, mp3 players, and music speakers.

HOW TO SETUP

• Connect your headset to the USB 3.0 connection on your computer. Connect the USB cord to the USB 3.0 port on your computer.
• Connect your headset to the HDMI out connection on your computer. Find the HDMI out port on your computer, and then connect the HDMI cable that came with the headset.
• Your headset should be connected to headphones.

HOW DO BUTTONS ON EARBUDS WORK

In essence, it consists of a few buttons that toggle various resistors across a few pins of the 1/8″ TRRS headphone connector. Normally, pressing these buttons would place the resistor parallel to (across from) the microphone. Two wires are required for a typical microphone: GND and the mic output signal.

HOW TO CONFIGURE MY HEADPHONES

• Right-click the taskbar’s sound icon. Go to Sound options and click Open. On the right, select Sound Control Panel. choose your headphones (should have a green tick).
• Click on Properties. (You can change the name of this sound output right here to make switching easier.)
• Choosing the Advanced tab.
• Depress the test button.

HOW TO INCREASE HEADPHONE VOLUME

Go to Settings > Sound > Volume on Android. For ringtone, notification, touch feedback, and media, there are four sound sliders. By turning on the switch Volume Keys for Media, you can additionally configure the volume keys to increase the volume either across all apps or in specific media apps.

FAQs

• What does the wired earphones’ button do?
  The in-line controls may also include capabilities just for using your phone to answer incoming calls. You can answer a call by tapping a button, which typically causes your music or another audio app to pause or stop playing for the duration of the call.

• Why won’t my phone recognize my wired headphones?
  Examine your headphones’ connector, cable, remote, and earbuds for wear or breakage. Check each earbud for debris on the meshes. Use a small, clean, dry brush with soft bristles to carefully brush debris out of all apertures.

• How should I use my earbuds?
  Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.

• What location are the audio settings?
  Select Apps & More > Settings > Sound by pressing the menu button. Go to the setting you wish to modify and click “ok.” Options for that setting start to show up. To choose the desired choice, move your cursor up and down the list. Then, press OK to make your selection.

• How can I link my iPhone to my wired headphones?
  Also required is iOS 10 or later on your iOS device. Connect the opposite end of the Lightning to 3.5 mm Headphone Jack Adapter to your headphones and the Lightning port on your iOS smartphone.

• Why won’t my headset microphone work?
  Make sure your device’s mute button is not active. Verify that your computer and microphone are properly connected by checking your headset or microphone. Make sure the default recording device on your computer is set to your microphone or headset.

• Why won’t the buttons on my earbuds work?
  Checking for dust and debris on the volume buttons is the simplest remedy you can try. If there is dust, you can get rid of it with rubbing alcohol, a q-tip, or a vacuum nozzle. Because the buttons are quite delicate, if you find any dirt there, carefully brush it away.

• What do IP and NK mean in earbuds?
  Both businesses attach various earphone components to various conductor points (read below). Even while other businesses also use one of the two connection techniques, Apple and Nokia were the pioneers. This is how an earphone Jack appears (Parts are labelled)

• Why won’t my wired earbuds function?
  The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.

• Why won’t my earbuds connect?
  Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

• Can you adjust the volume on earbuds?
  You may modify the purpose of the control buttons, adjust the volume, turn on ANC, Ambient Aware Mode, or use the equalizer using the Headphones Connect app, which is available for both Android and iOS. The earbuds also feature NFC quick pairing.

• I need to activate the volume touch control.
  Slide up to boost the volume and swipe down to reduce it on the right earpiece.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>