renkforce 2498314 12 Port CAT 6A Patch Panel Instruction Manual
- August 3, 2024
- renkforce
Table of Contents
renkforce 2498314 12 Port CAT 6A Patch Panel
FAQ
- Q: Can I use liquid cleaners to clean the product?
- A: No, it is recommended to clean the product with a dry, fiber-free cloth to avoid damage.
- Q: What should I do if the product gets exposed to extreme temperatures?
- A: Allow the product to adjust to room temperature before use to prevent condensation that might damage the product.
Intended use
- The product is intended for use as an RJ45 patch panel.
- The product is intended for indoor use only. Do not use it outdoors.
- Contact with moisture must be avoided under all circumstances.
- If you use the product for purposes other than those described, the product may be damaged.
- Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
- All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Operating instructions
Operating Instructions for download
- Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.
Description of symbols
- The symbol warns of hazards that can lead to personal injury.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
Connection and installation
Important:
- In case of doubt, do not perform installation yourself; leave it to a professional.
- For cabling use either the colour coding according to T568A or T568B (in Europe T568A is usually used).
- Do not mix the two colour codes on your network, or otherwise the network connections may not work.
- For information about the Pin assignments and coding information, refer to section: Pin assignments.
Pin assignments
| Pin | T568A | T568B |
|---|---|---|
| 1 | white/green | white/orange |
| 2 | green | orange |
| 3 | white/orange | white/green |
| 4 | blue | blue |
| 5 | white/blue | white/blue |
| 6 | orange | green |
| 7 | white/brown | white/brown |
| 8 | brown | brown |
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
- They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free takeback of waste. Conrad provides the following return options
free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
Technical Data
- Contact resistance …………………….. max. 100 mΩ
- Insulation resistance ………………….. min. 1000 mΩ, 500 V/DC
- Dielectric strength ……………………… 750 V/AC RMS, 60 Hz, 1 min
- Transmission rate ……………………… 10 Gbit/s
- Ports ……………………………………….. 12 x RJ45 (fully shielded)
- Cable Ø …………………………………… 5.0 – 8.5 mm (outer)
- LSA terminal code …………………….. T568A/B
- Material ……………………………………. SPCC, thickness: 1.5 mm
- Wire Ø …………………………………….. 1/0.4 -1/0.65 mm (AWG 26/1 -22/1)
- 7/0.20 -7/0.16 mm (AWG 24/7 -26/7)
- Standards ………………………………… ISO/IEC 11801:2002 Class EA
- ISO / IEC EN 50173 Class EA
- EIA / TIA 568-C Cat.6A
- IEC 60603-7-5
- Support ……………………………………. PoE IEEE 802.3af, PoE+ IEEE 802.3at
- Connection service life ………………. min. 750 mating cycles (RJ45)
- min. 200 mating cycles (insulation displacement terminals)
- Operating conditions ………………….. -10 to +60 °C, 10 – 85 % RH
- Storage conditions …………………….. -40 to +70 °C, 10 – 85 % RH
- Dimensions (W x H x D) …………….. approx. 255 x 100.8 x 22.2 mm
- Weight …………………………………….. approx. 530 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2498314_V1_0424_dm_mh_en 1280667403-2 I1/O1 en
Scan
Documents / Resources
|
renkforce 2498314 12 Port CAT 6A Patch
Panel
[pdf] Instruction Manual
RF-4996628, 2498314, 2498314 12 Port CAT 6A Patch Panel, 2498314 6A Patch
Panel, 12 Port CAT 6A Patch Panel, 12 Port Panel, CAT 6A Patch Panel, Panel,
CAT Panel, 6A Patch Panel
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>